Shenzhen HDV Photoelectron Technology Ltd.
19Products, 0News, 0Sell Leads
Products
100M 8 port reverse power supply RPOE POE switch Reverse poe switchNew
100M-RS
Inquire Now
Description
Short Description:
RPOE switch has intelligent device Power management features solving a major problem of powering the device for internet service provider. This switch can be powered using remote power from customer using specially designed POE injector or any standard POE injector(24v DC,0.75amp).This eliminates the needs of arranging power at building top (ups not require/No need to pay more money to customer or society).This saves lot of money of ISPs and improves uninterrupted service to the customer.
RPOE switch has intelligent device Power management features solving a major problem of powering the device for internet service provider. This switch can be powered using remote power from customer using specially designed POE injector or any standard POE injector(24v DC,0.75amp).This eliminates the needs of arranging power at building top (ups not require/No need to pay more money to customer or society).This saves lot of money of ISPs and improves uninterrupted service to the customer.
Features
PRODUCT FEATURE:
REVERSE POE TECHNOLOGY:8 Port 10/100 Reverse POE switch which has latest generation of fast Ethernet reverse POE switching technology. It contains 7*10/100 base T Reverse Poe ports (RPOE),1*10/100 Base date Uplink Port&12V DC out for Powering ONU.
Supports Auto-Negotiation: Each of the ports automatically detect whether connected network devices are running at 10Mbps or 100Mbps and half-duplex or full-duplex mode, and adjusts the speed and mode accordingly ensuring easy and hassle-free operation.
Supports Non-blocking Wire Speed: The switch forwards and receives traffic seamlessly with its Non-blocking wire- speed. Every port of the Switch supports speeds up to 200Mbps in full-duplex mode simultaneously, providing full wire speed to connected devices and allowing you to run a high speed network smoothly.
Cascading support: switches can be cascaded for more users per Building (Up to 1 Main+3 switches )
Port base Isolation u/Hardware VLAN: The feature of Port Isolation is implemented in this unit where in the Ethernet Date of the Uplink Port can be transferred to any of the Downlink ports but the individual Downlink ports cannot communicate with each other.
Over voltage Protection: Over voltage Protection is provided on each date port to eliminate damage due to connection of higher voltage(Higher than 24V DC. Up to 80V DC). By mistake if user connect more than 24V POE injector then switch will goes on power off mode and will start working again once this high voltage source is removed.
Over current Protection: We have provided over current protection on each port to prevent damage to the switch in case of high current flowing due to any reason. This is provided using Resettable Fuse to facilitate easy maintenance and avoiding frequent change of blown fuse.
REVERSE POE TECHNOLOGY:8 Port 10/100 Reverse POE switch which has latest generation of fast Ethernet reverse POE switching technology. It contains 7*10/100 base T Reverse Poe ports (RPOE),1*10/100 Base date Uplink Port&12V DC out for Powering ONU.
Supports Auto-Negotiation: Each of the ports automatically detect whether connected network devices are running at 10Mbps or 100Mbps and half-duplex or full-duplex mode, and adjusts the speed and mode accordingly ensuring easy and hassle-free operation.
Supports Non-blocking Wire Speed: The switch forwards and receives traffic seamlessly with its Non-blocking wire- speed. Every port of the Switch supports speeds up to 200Mbps in full-duplex mode simultaneously, providing full wire speed to connected devices and allowing you to run a high speed network smoothly.
Cascading support: switches can be cascaded for more users per Building (Up to 1 Main+3 switches )
Port base Isolation u/Hardware VLAN: The feature of Port Isolation is implemented in this unit where in the Ethernet Date of the Uplink Port can be transferred to any of the Downlink ports but the individual Downlink ports cannot communicate with each other.
Over voltage Protection: Over voltage Protection is provided on each date port to eliminate damage due to connection of higher voltage(Higher than 24V DC. Up to 80V DC). By mistake if user connect more than 24V POE injector then switch will goes on power off mode and will start working again once this high voltage source is removed.
Over current Protection: We have provided over current protection on each port to prevent damage to the switch in case of high current flowing due to any reason. This is provided using Resettable Fuse to facilitate easy maintenance and avoiding frequent change of blown fuse.
Specification
PRODUCT SPECIFICTAION:
Product
RPOE 7*10/100M+1*100M 12V2A out
Ethernet Connector RJ45 Jacks(8 Ports)10/100Base-TX with Auto-MDIX
Uplink 1*10/100 Base T Data Uplink Port(port 1)
Downlink 7*10/100 Base-Reverse POE Ports(Port 2to 8)Data + Power in
standards IEEE STD. 802.3 10BASE T 10Mbps,Half/Full Duplex
IEEE STD. 802.3U 100BASE-TX,10/100Mbps,Half/Full Duplex
IEEE STD.802.3X FLOW CONTROL AND BACK PRESSURE
IEEE STD.802.3AZ Energy Efficient Ethernet
Protocols CSMA/CD
Transmission Method Store and forward
MAC ADDRESS Support 1k MAC address
Packet Buffer Embedded 448K bits packet buffer
Maximum Forwarding Packet Length 1552/1536 bytes option
Filtering/Forwarding Rates 100Mbps Port – 148800pps
10Mbps Port – 14880pps
Network Cable 4-pair UTP/STP Cat 5 cable
LEDs Link/Activity per Ethernet port
Power: On/Off for switch
Power Over Ethernet injector: Power
Supply(IN)
Power over Ethernet 24V @ 18W on SPARE pair ( to supply power to the HDV switch as well as a compatible POE device(e.g. CPE)
No. of Ethernet Ports that can Power
On the Switch & ONU
Any one /all of the seven Downlink Ports
Power Over Ethernet Power over Ethernet injector on Four Pair Cable
DC Out 12V/2A DC OUT THROUGH DC jack for powering other Device like ONU
Ethernet Devices that can be powered Single
CAT-5 Cable Date Lines Pair 1:Pins 1/2,Pair 2:Pins3/6
CAT-5 Cable Power Lines +VDC: Pins 4/5,-VDC:Pins 7/8
Power consumption 5 Watt (Poe injector) / 2 Watt (Switch)
Operating Temperature 0℃to 50℃
Storage environment 0℃ to 75℃
Operating Humidity 20% to 95% (non-condensing)
Dimension of Switch 125mm*70mm*25mm
Weight of Switch 0.45KG
Product
RPOE 7*10/100M+1*100M 12V2A out
Ethernet Connector RJ45 Jacks(8 Ports)10/100Base-TX with Auto-MDIX
Uplink 1*10/100 Base T Data Uplink Port(port 1)
Downlink 7*10/100 Base-Reverse POE Ports(Port 2to 8)Data + Power in
standards IEEE STD. 802.3 10BASE T 10Mbps,Half/Full Duplex
IEEE STD. 802.3U 100BASE-TX,10/100Mbps,Half/Full Duplex
IEEE STD.802.3X FLOW CONTROL AND BACK PRESSURE
IEEE STD.802.3AZ Energy Efficient Ethernet
Protocols CSMA/CD
Transmission Method Store and forward
MAC ADDRESS Support 1k MAC address
Packet Buffer Embedded 448K bits packet buffer
Maximum Forwarding Packet Length 1552/1536 bytes option
Filtering/Forwarding Rates 100Mbps Port – 148800pps
10Mbps Port – 14880pps
Network Cable 4-pair UTP/STP Cat 5 cable
LEDs Link/Activity per Ethernet port
Power: On/Off for switch
Power Over Ethernet injector: Power
Supply(IN)
Power over Ethernet 24V @ 18W on SPARE pair ( to supply power to the HDV switch as well as a compatible POE device(e.g. CPE)
No. of Ethernet Ports that can Power
On the Switch & ONU
Any one /all of the seven Downlink Ports
Power Over Ethernet Power over Ethernet injector on Four Pair Cable
DC Out 12V/2A DC OUT THROUGH DC jack for powering other Device like ONU
Ethernet Devices that can be powered Single
CAT-5 Cable Date Lines Pair 1:Pins 1/2,Pair 2:Pins3/6
CAT-5 Cable Power Lines +VDC: Pins 4/5,-VDC:Pins 7/8
Power consumption 5 Watt (Poe injector) / 2 Watt (Switch)
Operating Temperature 0℃to 50℃
Storage environment 0℃ to 75℃
Operating Humidity 20% to 95% (non-condensing)
Dimension of Switch 125mm*70mm*25mm
Weight of Switch 0.45KG
Other 1
PRODUCT APPLICATION:
7*10/100 Base T Reverse POE Ports(RPOE) & 1*10/100 Base T Uplink Port & 12V DC Power out for Powering ONU
7*10/100 Base T Reverse POE Ports(RPOE) & 1*10/100 Base T Uplink Port & 12V DC Power out for Powering ONU
About Us
Shenzhen HDV Photoelectron Technology Ltd. was established in 2012, located in Shenzhen, Guangdong, China. It is a high-tech enterprise specializing in R&D, production and sales of Optical Fiber Communication Equipment. It has 6,000+ square meters of R&D and production base.
The company has 200+ employees, including 35 R&D engineers, who are the elites in the industry. Its main products include GPON, EPON OLT, ONU, SFP Module,PON Module, Ethernet switch,Fiber Switch,POE Switch,Fiber Media Converter and other FTTH series.
We provide customers with various customized services from hardware to software, and mainly cooperation with domestic and foreign Telecom Equipment Brands. HDV has very strict quality control and considerate customer service, and has successfully obtained ISO 9001 quality management system certification and CE / FCC / RoHS / BIS / SGS / TUV / ANATEL product certificate.
Based on 10 years of marketing experience, executive management team, mature experience, senior R&D engineer team of telecom products, HDV provides a full range of products in the FTTH field, and become the world's popular ODM and OEM manufacturer focusing on one-stop solution of optical fiber access network !
We expect to expend more cooperation and make a win-win future.
Established Date: 2012/2/8
No. of Employees: 200 Persons
Business Type: Manufacturer/OEM
Main Products
ONU, OLT, SFP, Media Converter, Ethernet Switch, POE Switch, Temperature Camera, Epon Onu, Gpon Onu, Xpon Onu