Shenzhen Apt Prosper Technology .Co.Ltd
7Products, 0News, 0Sell Leads
Products
fiber media converter
APT-103M22OC
Inquire Now
Description
APT-103M22OC Dual Fiber Dual-Direction Fiber Optic Media Converter
The Converter have been testified to comply with the limits for a class A didtal device, pursuant to part 15 of the FCC Rules. These standards are designed to provide reasonable protection against harmful interference when these devices are operated in a commercial environment. These devices can generate and radiate radio frequency energy and may cause harmful interference to radio communications unless installed in accordance with User's Guide. Operation of this device in a residential area is likely to cause harmful interface which will make the user responsible for the appropriate remedial action at this expense.
These are class A products In a domestic environment these products may cause radio interface in which cause the user will need to consider adequate preventative menasures.
The Converter have been testified to comply with the limits for a class A didtal device, pursuant to part 15 of the FCC Rules. These standards are designed to provide reasonable protection against harmful interference when these devices are operated in a commercial environment. These devices can generate and radiate radio frequency energy and may cause harmful interference to radio communications unless installed in accordance with User's Guide. Operation of this device in a residential area is likely to cause harmful interface which will make the user responsible for the appropriate remedial action at this expense.
These are class A products In a domestic environment these products may cause radio interface in which cause the user will need to consider adequate preventative menasures.
Features
1. Optical port working mode is 100M full-duplex, LAN port is Auto Negotiable
2. When twisted-pair interface initialization, warrant to check couple equipment's state to set itself's state, if can't check out opponent state that the state is uncertainty.
3. Don't use your unaided eyes to look at the TX fiber transmit port when the media converter's state is electrify.
4. Please put dustproof cover on fiber optic media converter when it is not used.
5. When the product connecting with other equipment(router, switch, HUB, NIC), the interconnection equipment's optical interface's speed and mode must be consistent. (multimode and singlemode)
Interconnection equipment's LAN port's speed should mismatch. (100Base-TX/100Base-T).
6. This product must pay attention to connecting origin end media converter's TX port's wire jumper with connectting far end media converter's RX port. Origin end media converter's RX port's wire jumper must be connect with far end TX port. Don't connect wrong.
2. When twisted-pair interface initialization, warrant to check couple equipment's state to set itself's state, if can't check out opponent state that the state is uncertainty.
3. Don't use your unaided eyes to look at the TX fiber transmit port when the media converter's state is electrify.
4. Please put dustproof cover on fiber optic media converter when it is not used.
5. When the product connecting with other equipment(router, switch, HUB, NIC), the interconnection equipment's optical interface's speed and mode must be consistent. (multimode and singlemode)
Interconnection equipment's LAN port's speed should mismatch. (100Base-TX/100Base-T).
6. This product must pay attention to connecting origin end media converter's TX port's wire jumper with connectting far end media converter's RX port. Origin end media converter's RX port's wire jumper must be connect with far end TX port. Don't connect wrong.
Specification
Technical parameter
1. Standards: IEEE802.3u Fast Ethernet 10/100Base-TX and 100Base-FX
2. Connectors: (RJ45-UTP and Fiber SC)
3. LED: Power. FDX/Col, FX-Link/Act, TXLink/Act, FX100. TX100
4. Data Tranfer Mode: 10/100Mbps
5. Duplex Mode: Full or Half Duplex Mode
6. Power requirement: AC 100-260V DC1A@+5V
7. Ambient temperature: 0o C - 70o C
8. Humidity: 5% - 90%(noncondensing)
9. Cable: Cat. 5 UTP cable
10. Fiber: Multi-mode
11. Size: 94mm*70mm*26mm (L*W*H)
Specification
Connector Type: SC
Typical Distance: 2Km
Fiber Type: Multi-mode
Wavelength: 1300nm
Min TX PWR: -19.0dBm
Max TX PWR: -14.0dBm
Sensitivity: 31.0dBm
Link Budget: 12.0dBm
1. Standards: IEEE802.3u Fast Ethernet 10/100Base-TX and 100Base-FX
2. Connectors: (RJ45-UTP and Fiber SC)
3. LED: Power. FDX/Col, FX-Link/Act, TXLink/Act, FX100. TX100
4. Data Tranfer Mode: 10/100Mbps
5. Duplex Mode: Full or Half Duplex Mode
6. Power requirement: AC 100-260V DC1A@+5V
7. Ambient temperature: 0o C - 70o C
8. Humidity: 5% - 90%(noncondensing)
9. Cable: Cat. 5 UTP cable
10. Fiber: Multi-mode
11. Size: 94mm*70mm*26mm (L*W*H)
Specification
Connector Type: SC
Typical Distance: 2Km
Fiber Type: Multi-mode
Wavelength: 1300nm
Min TX PWR: -19.0dBm
Max TX PWR: -14.0dBm
Sensitivity: 31.0dBm
Link Budget: 12.0dBm
Safety/Quality Approvals
Iso 9001 ce certification
About Us
Shenzhen APT Prosper Network Technology Co., Ltd was set up in 2004.our company is located at the central area of Futian District of Shenzhen city. It is a hightech enterprise specialize in the R&D,production and marketing of optical communication equipment.
The main products of the company includes Ethernet optical fiber transceiver, optical line terminal, switchboard and other optical network equipment.
The optical network products are mainly branded as APTTEK.
The company boasts perfect management, cutting-edge technology and preeminent service, sufficient talents and reasonable price products. The newly developed products, including APT-103, APT-1024, APT-1124 and APT-CPS-14, feature their high stability and compatibility.
Presently , APT series products are not only sold in big cities in China , but also widely applied by the carriers the worldwide. The product quality of the company is ensured by its strong R&D capability, strict QC flow as well the spirit of continuous improvement.
The products have passed the network access test for communication equipment held by the Ministry of Information Industry and all the technical indexes are in conformity with the standards specified in the certification of network access communication equipment. The company has co-operated with many well-known companies by OEM method.
We believe the favorable price, superllent quality and perfect services will surely meet customers' satisfation .
Business Type: None
Main Products
optic media converter , pacth cord,