Shenzhen Apt Prosper Technology .Co.Ltd
7Products, 0News, 0Sell Leads
Products
media converter
APT-103WS34/54OC
Inquire Now
Description
APT-103WS34OC Single-fiber Dual-direction Fiber Optic Media Converter
Single-fiber dual-direction fiber optic media converter is a transceiver wihch is used to Ethernet's electric signal to transmit photosignal 's photoelectricity signal , it features that it adopts one fiber cable and can receive and transmit photosignal in-phase, enhance one double transmit energy than existing optical fiber, economized fiber cable's source.
APT-103WS34OC is a self-adapted single-fiber dual-direction fiber optic media convertr with 10/100M. Due to single-fiber dual-direction media converter's transmit photosignal transmit wavelength and receive wavelength are difference, than must use by gemination. Namely is one TX and one RX, don't be used wrong, otherwise it can't work up to snuff.
APT-103WS34OC singlemode single-fiber's transmiting photosignal wavelength is 1550nm, receiving photosignal wavelength is 1310nm; Sing-fiber dual-direction media converter have one RJ-45 interface and one SC single-fiber interface, separately for using to connect twisted-pair and fiber. Single-fiber media converter have 6 LED indicator: POWER, TX100, FX100, FX Link/ACT, TX Link/ACT, FDX.
Single-fiber dual-direction fiber optic media converter is a transceiver wihch is used to Ethernet's electric signal to transmit photosignal 's photoelectricity signal , it features that it adopts one fiber cable and can receive and transmit photosignal in-phase, enhance one double transmit energy than existing optical fiber, economized fiber cable's source.
APT-103WS34OC is a self-adapted single-fiber dual-direction fiber optic media convertr with 10/100M. Due to single-fiber dual-direction media converter's transmit photosignal transmit wavelength and receive wavelength are difference, than must use by gemination. Namely is one TX and one RX, don't be used wrong, otherwise it can't work up to snuff.
APT-103WS34OC singlemode single-fiber's transmiting photosignal wavelength is 1550nm, receiving photosignal wavelength is 1310nm; Sing-fiber dual-direction media converter have one RJ-45 interface and one SC single-fiber interface, separately for using to connect twisted-pair and fiber. Single-fiber media converter have 6 LED indicator: POWER, TX100, FX100, FX Link/ACT, TX Link/ACT, FDX.
Specification
Technical paramter
1. Accord with IEEE802.3 IEEE802.3u IEEE802.3x IEEE802.1q 100Base-T, 100Base-TX,
100Base-FX standard.
2. Support TCP/IP PPPOE DHCP ICMP NAT protocol
3. Flow control mode: Full duplex adopt IEEE802. 3X, half duplex adopt Backpressure's standard.
4. Electricity port support auto-negotiation function, autoregulation transmit mode and transmit speed.
5. Prot supply Auto-MDI/MDIX automatic reverse.
6. Support storage transmit mode
7. Support electricity port's 10M 100M mode or self-adapt mode's switch.
8. Afford of state indicator, external power(output 5V-50HZ 1A)
9. Interface: Electric port RJ-45 fiber port: SC
10. Twisted-pair: CAT. 5 CAT. 6
11. Singlemode fiber: 8/125, 8.3/125, 9/125μ M
12. Working temperature: 0~50o C
13. Storage temperature: -20~70o C
14. Humidity: 5% ~ 90%(noncondensing)
15. Size: 26*70*94mm(H*W*L)
Specification
Connect type: SC
Fiber type: Singlemode
Wavelengh: 1310/1550nm
Typical distance: 40KM
Min TX PWR: -9.0dBm
Max TX PWR: -3.0dbm
Sensitivity: <-32dbm
Link budget: 23.0dbm
Note
1. Optical port working mode is 100M Full Duplex, LAN port is Auto Negotiation.
2. Twisted-pair interface initialization base to couple equipment state to set self's state. If can't test opponent state, that state is uncertainty.
3. Strictly prohibit use unaided eye to look at the TX fiber transmit port when the media coneverter is electrify state.
4. Please put dustproof cover on fiber interface, when the fiber optic media converter is not used.
5. When the product connecting with other equipment(router, switch, HUB, NIC), the interconnection equipment's optical interface's speed and mode must be consistent (multimode and singlemode).
Interconnection equipment's LAN port's speed should mismatch. (100Base-TX/100Base-T)
6. This product must be gemination use. Gemination media converter's optic module's transmit and receive part must use separate 1310nm and 1550nm wavelength.
1. Accord with IEEE802.3 IEEE802.3u IEEE802.3x IEEE802.1q 100Base-T, 100Base-TX,
100Base-FX standard.
2. Support TCP/IP PPPOE DHCP ICMP NAT protocol
3. Flow control mode: Full duplex adopt IEEE802. 3X, half duplex adopt Backpressure's standard.
4. Electricity port support auto-negotiation function, autoregulation transmit mode and transmit speed.
5. Prot supply Auto-MDI/MDIX automatic reverse.
6. Support storage transmit mode
7. Support electricity port's 10M 100M mode or self-adapt mode's switch.
8. Afford of state indicator, external power(output 5V-50HZ 1A)
9. Interface: Electric port RJ-45 fiber port: SC
10. Twisted-pair: CAT. 5 CAT. 6
11. Singlemode fiber: 8/125, 8.3/125, 9/125μ M
12. Working temperature: 0~50o C
13. Storage temperature: -20~70o C
14. Humidity: 5% ~ 90%(noncondensing)
15. Size: 26*70*94mm(H*W*L)
Specification
Connect type: SC
Fiber type: Singlemode
Wavelengh: 1310/1550nm
Typical distance: 40KM
Min TX PWR: -9.0dBm
Max TX PWR: -3.0dbm
Sensitivity: <-32dbm
Link budget: 23.0dbm
Note
1. Optical port working mode is 100M Full Duplex, LAN port is Auto Negotiation.
2. Twisted-pair interface initialization base to couple equipment state to set self's state. If can't test opponent state, that state is uncertainty.
3. Strictly prohibit use unaided eye to look at the TX fiber transmit port when the media coneverter is electrify state.
4. Please put dustproof cover on fiber interface, when the fiber optic media converter is not used.
5. When the product connecting with other equipment(router, switch, HUB, NIC), the interconnection equipment's optical interface's speed and mode must be consistent (multimode and singlemode).
Interconnection equipment's LAN port's speed should mismatch. (100Base-TX/100Base-T)
6. This product must be gemination use. Gemination media converter's optic module's transmit and receive part must use separate 1310nm and 1550nm wavelength.
About Us
Shenzhen APT Prosper Network Technology Co., Ltd was set up in 2004.our company is located at the central area of Futian District of Shenzhen city. It is a hightech enterprise specialize in the R&D,production and marketing of optical communication equipment.
The main products of the company includes Ethernet optical fiber transceiver, optical line terminal, switchboard and other optical network equipment.
The optical network products are mainly branded as APTTEK.
The company boasts perfect management, cutting-edge technology and preeminent service, sufficient talents and reasonable price products. The newly developed products, including APT-103, APT-1024, APT-1124 and APT-CPS-14, feature their high stability and compatibility.
Presently , APT series products are not only sold in big cities in China , but also widely applied by the carriers the worldwide. The product quality of the company is ensured by its strong R&D capability, strict QC flow as well the spirit of continuous improvement.
The products have passed the network access test for communication equipment held by the Ministry of Information Industry and all the technical indexes are in conformity with the standards specified in the certification of network access communication equipment. The company has co-operated with many well-known companies by OEM method.
We believe the favorable price, superllent quality and perfect services will surely meet customers' satisfation .
Business Type: None
Main Products
optic media converter , pacth cord,