Sodium Naphthalene Sulphonate Formaldehyde SNF-A
Sodium Naphthalene Sulphonate Formaldehyde
/Poly Naphthalene Sulfonate Formaldehyde Condensate
(SNF-A)
?
?roduct Description??
??????? High Range Water-Reducing Admixture?
??????? Sodium Naphthalene Sulphonate Formaldehyde, Poly Naphthalene Sulfonate Formaldehyde Condensate,Concrete Admixture
?
?pecification??
Appearance
Brown yellow powder
?Dry matter
???3%
?PH
?7-9
?Sodium sulfate content
??
?chlorine content
???.3%
?
?ses??
??????? Sodium Naphthalene Sulphonate Formaldehyde produces concrete with extremely workable characteristics referred to as high slump. PNS also allows concrete to be produced with very low water/cement ratios at low or normal slumps.?
??????? Sodium Naphthalene Sulphonate Formaldehyde is ideal for use in prestress, precast, bridge deck or any concrete where it is desired to keep the water/cement ratio to a minimum and still achieve the degree of workability necessary to provide easy placement and consolidation
?
?ddition Rates??
??????? Sodium Naphthalene Sulphonate Formaldehyde can be added directly or added in after melt. It can be added during mixing and after-mixing. The afterward approach can achieve better result. The suggested addition rate is 0.75%.?
Sodium Naphthalene Sulphonate Formaldehyde Direction?
Prepare solutions as required.?
Direct use of powdery agent is allowed. Alternatively the addition of the agent is followed by water moisturization (water-cement ratio: 60%).?
The agent can be combined with other externally applied agents if pilot development or laboratory experiment succeeds.
?
?ackage, Storage & Handling??
???????? Package : 25kg/bag or 650kg/bag
2017/01/24
2017/01/24
2017/01/24
People Also Viewed
2024/04/28
2024/04/28
2024/04/28
2024/04/28
2024/04/28