Ceratek Technical Ceramic Co., Limited
ceramic rubber lining
2018/5/11 ~ 2018/5/25
Description
ceramic rubber liner as wear resistant lining
Ceramic-Rubber compound lining plate as one kind abrasion resistant lining is compounded by high alumina ceramics and excellent natural rubber through special process. The excellent damping performance of natural rubber greatly lowers the noise generated in the transportation, which fully settled a series of issues such as impact, abrasion and noise.By embedding the alumina ceramic lining tiles onto rubber, it is also possible to achieve some impact resistance which will prevent the tiles from cracking in areas of high impact. This achieves a vastly superior result to ceramic lining tiles which are bonded directly to the steelwork.
Made by 92% alumina ceramic lining tile(150mm*100mm*50mm),6mm rubber,6mm steel back for ceramic rubber liner
You can install by stud welding on the steel back
The ceramic is vulcanized into the rubber
The rubber is vulcanized with steel back
Also we can make the ceramic rubber lining according to your requirement
You can tell us your requirement,such as the alumina ceramic tile size,the ceramic rubber liner size and so on
welcome to Enquiry for this kind wear resistant lining!
Similar Sell Lead
Ceramic Ferrules
Ceramic Ferrule for Stud Welding is formulated with cordierite.and by molding,vinegar,calcining,etc.The specification is as follows:UF RF PF ordinary and penetrable etc. Ceramic ferrules is ...
2020/10/12 ~ 2020/10/26
Ceramic Ferrule
Ceramic Ferrule for Stud Welding is formulated with cordierite.and by molding,vinegar,calcining,etc. Ceramic ferrules for stud welding is widely used for magnetic force floating railway engineer,bu ...
2020/10/12 ~ 2020/10/26
alumina ceramic beads
Our alumina ceramic beads for PWHT is high temperature resistance, excellent insulating property, and efficient thermal conductivity and heat transfer,higher density, higer surface finish and better u ...
2019/12/18 ~ 2019/12/31
silicon carbide burner nozzle
The silicon carbide burner nozzle is the ideal chamber for gas, fuel oil kiln, especially for high requirements to the range of temperature, can effectively control the furnace temperature. Reactio ...
2019/12/16 ~ 2019/12/30
Alumina Ceramic Nozzle
Material:95% alumina,99% alumina all international standard welding and shot blasting nozzles, such as 10N, 13N, 53N, 54N and 57N series. Features for Alumina Ceramic Nozzle: 1.Standard sce ...
2019/12/16 ~ 2019/12/30