POWER-WIN TECHNOLOGY CORP.
125Products, 10News, 0Sell Leads
Products
210W AC-DC Desktop AdaptorAC Inlet C14
A08210-XX
Inquire Now
Description
*Meet DOE Level VII and EU ErP Efficiency Compliant
*3-prong IEC320-C14, Class I AC inlet
*Medical safety approved ( 2x MOPP between primary to secondary )
Suitable for BF application with appropriate system consideration Suitable for BF application with appropriate system consideration
*Altitude during operation : ITE up to 5000m , Medical Below 3000m
*< 0.15W No Load Input Power
*Touch current less than 100uA
*3 year warranty
*3-prong IEC320-C14, Class I AC inlet
*Medical safety approved ( 2x MOPP between primary to secondary )
Suitable for BF application with appropriate system consideration Suitable for BF application with appropriate system consideration
*Altitude during operation : ITE up to 5000m , Medical Below 3000m
*< 0.15W No Load Input Power
*Touch current less than 100uA
*3 year warranty
Features
*Dimension : L 170×W 85×H 44 mm ( 6.69"x3.35"x1.73" )
*Weight : 0.78 kgs. ( 1.72 lbs. )
*Weight : 0.78 kgs. ( 1.72 lbs. )
Specification
Electrical specifications
- Input range :90 - 264VAC
- Frequency :47 - 63Hz
- Power Factor :>0.95 @115VAC; > 0.90 @230VAC @full load
- Inrush current;< 25A peak @115VAC;< 50A peak @230VAC cold start @25C
- Input current (rms) :2.5A @115VAC; 1.3A @230VAC max.
- Efficiency :>92% @80% Full load, 230VAC
>89% @Average efficiency, 115/230VAC - Maximum output power (Po) :210 Watts convection cooling
- Hold-up time :>10ms typical @full load, 115VAC
- Short circuit protection :Auto-recovery
- Over load protection :Auto-recovery
- Over voltage protection :Latch off
- Over temperature protection :Latch off
Safety standards
- UL/cUL 60601-1
- TUV EN 60601-1
- CB IEC 60601-1
- UL/cUL UL 62368-1
- TUV EN 62368-1
- CB IEC 62368-1
EMC standards
- EN 60601-1-2
- EN 55011 Class B
- EN 55032 Class B
- EN 55035 Class B
- FCC Part 15 Class B
- FCC Part 18 Class B
- CE
Environmental
- Operating temperature : -20 to +60°C (Refer to derating curve)
- Operating Humidity: 10-95% , non-condensing.
- Storage temperature : -20°C to +85°C, Non-condensing.
- Storage humidity : 0-95% , non-condensing.
- MTBF : > 350,000 hours @full load and 25°C ambient temperature based on Telcordia SR-332(Bellcore)
Model | Output voltage | Output current | Po | O/P Regulation | Ripple & Noise (Vp-p) |
Efficiency Level |
---|---|---|---|---|---|---|
A08210-12
|
+12V
|
17.50A
|
210W | ±5% | 100mV | VII |
A08210-15 | +15V | 14.00A | 210W | ±5% | 100mV | VII |
A08210-19 | +19V | 11.05A | 210W | ±5% | 100mV | VII |
A08210-24 | +24V | 8.75A | 210W | ±5% | 150mV | VII |
A08210-28 | +28V | 7.50A | 210W | ±5% | 150mV | VII |
A08210-36 | +36V | 5.83A | 210W | ±5% | 150mV | VII |
A08210-48 | +48V | 4.37A | 210W | ±5% | 150mV | VII |
Note:
Ripple and noise are measured at oscilloscope 20MHz bandwidth by a 47uF electrolytic capacitor and a 0.1uF ceramic
capacitor in parallel at output connector.
(-1 to -20°C ambient temperature and EMS Immunity worse case O/P Regulation≦ +/-10%)
The switching frequency of this series is set within 56 to 85KHz at full load.
The ripple and noise of this series is tested under full load condition.
Safety and EMC Performance
Description | Safety | EMC |
---|---|---|
Medical equipment |
IEC 60601-1:2005+AMD1:2012+AMD2:2020 EN 60601-1:2006/A1:2013/A12:2014/A2:2021 ANSI/AAMI ES60601-1:2005/A2:2021 CAN/CSA C22.2 NO. 60601-1:14/A2:22 |
EN 60601-1-2:2015+A1:2021 EN 55011:2016+A1:2019+A2:2021 FCC 47 CFR Part 18 |
Audio / Video, ITEequipment | IEC 62368-1:2018 EN IEC 62368-1:2020+A11:2020 UL 62368-1, 3rd Ed CAN/CSA C22.2 No. 62368-1:19, 3rd Ed |
EN 55032:2015+A11:2020 EN 55035:2017+A11:2020 FCC 47 CFR Part 15B(*) ICES-003 Issue 7 |
Tests for conformance to this equirement will be performed with final system (*) FCC PART 15 compliance information and warings:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions :
This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions :
Insulation level and dielectric withstand (HI-POT)
Audio / video, ITE equipment | Isolation voltage | Grade insulation |
---|---|---|
Primary circuits to secondary circuits | 4242Vdc (3000Vac) | Reinforced |
Primary circuits to earth ground | 2121Vdc (1500Vac) | Basic |
Secondary circuits to earth ground | 2121Vdc (1500Vac) | Basic |
Medical equipment | Isolation voltage | Means of patient protection |
---|---|---|
Primary circuits to secondary circuits | 5656Vdc (4000Vac) | 2 MOPP |
Primary circuits to earth ground | 2121Vdc (1500Vac) | 1 MOPP |
Secondary circuits to earth ground | 2121Vdc (1500Vac) | 1 MOPP |
Note : testing in Production use a dc voltage test 4 Sec.
About Us
Power-Win is an esteemed power supply manufacturer headquartered in Taipei, Taiwan, with a rich legacy in the industry dating back to 1989. Specializing initially in PC power supplies, Power-Win has evolved its portfolio to encompass a diverse range of cutting-edge products, including AC/DC switching adapters, open frame power supplies, DC/DC ATX converters, and medical power supplies.
With over two decades of expertise in design, research, and manufacturing, Power-Win stands out as a trailblazer in anticipating and shaping market trends. Notably, our commitment to innovation is evident through the development of proprietary products that not only meet but exceed industry benchmarks. In addition to our in-house creations, Power-Win collaborates closely with clients on bespoke OEM/ODM projects, ensuring a seamless integration of their unique requirements.
Embracing the imperative for energy efficiency and environmental sustainability, Power-Win is at the forefront of the global movement towards green power solutions. Our latest offerings include efficiency level VI adapters, exemplifying our dedication to meeting the evolving demands of a conscientious and energy-efficient market. Complementing this, our open frame units are meticulously crafted to address the specific needs of our discerning clientele.
At Power-Win, we don't just provide power supplies; we empower businesses with reliable, innovative, and eco-friendly solutions. As we continue to chart new territories in power supply technology, we invite international buyers to join us in shaping the future of efficient and sustainable energy.
Business Type: Manufacturer/OEM
Main Products
Switching Power Supply, Medical Power Supply, Switching Adapters, DC/DC Converters, Open Frame Power Supply, Power Supply, Power Adapter, AC/DC Switching Adapter, AC/DC Adapter, Efficiency Level VI, Medical Adapter, AC/DC Open Frame