POWER-WIN TECHNOLOGY CORP.
125Products, 10News, 0Sell Leads
Products
65W AC-DC Open FrameL 101.6 × W 50.8 × H 2 7.5 mm
PW-IM065B2-1YXXXZ
Inquire Now
Description
*Both ITE & Medical Approvals.
*Medical Body Floating ( BF ) rated, Class I Power Supply
*Medical applications Protection: Means of patient protection ( MOPP )
*Altitude during operation: ITE up to 5000m ,Medical Below 3000m.
*Less than 75mW no-load power consumption
*Low leakage current
*3 year warranty
*Medical Body Floating ( BF ) rated, Class I Power Supply
*Medical applications Protection: Means of patient protection ( MOPP )
*Altitude during operation: ITE up to 5000m ,Medical Below 3000m.
*Less than 75mW no-load power consumption
*Low leakage current
*3 year warranty
Features
*Dimension : L101.6 × W50.8 × H27.5 mm ( 4" x 2" x 1.08" )
*Weight : 0.136 kgs. ( 0.30 lbs. )
*Weight : 0.136 kgs. ( 0.30 lbs. )
Specification
Electrical specifications
- Input range : 90 - 264VAC
- Frequency : 47 - 63Hz
- Inrush current : < 45A peak @115VAC; < 90A peak @230VAC cold start @25°C
- Input current ( rms ) : 2A @115VAC; 1A @230VAC max.
- Efficiency : > 87% typical @full load, 115VAC ( 5V series excluded )
- Touch current < 100uA @264VAC
- Maximum output power ( Po ) : 65 Watts convection cooling
- Hold-up time : > 10ms typical @full load, 115VAC
- Short circuit protection : Auto-recovery
- Over load protection : 110% to 180% maximum rating, Auto-recovery
- Over voltage protection : Latching type. AC Recycle
Safety standards
- UL60601-1 3.1rd Edition
- UL/c-UL UL60950-1
- UL/c-UL UL62368-1
- EN60601-1 3.1rd Edition
- TUV EN60950-1
- TUV EN62368-1
- IEC EN60601-1 3.1rd Edition
- CB IEC 60950-1
- CB IEC 62368-1
EMC standards
- IEC60601-1-2 Ed4:2014
- EN60601-1-2 Ed4:2015
- EN55024
- EN 55011 Class B
- EN55032 Class B
- FCC Part 15 Class B
- FCC Part 18 Class B
- CE
Environmental
- Operating temperature : -20 to +70°C ( Derate linearly 2.5% per °C from 51 to 70°C, Derate linearly 1.0% per °C from 0 to -20°C )
- Storage temperature: -20°C to +85°C
- Humidity: Non-condensing 10% to 90%
- MTBF : > 150,000 hours @full load and 25°C ambient temperature
DC OUTPUT & FEATURES
Model | Output Voltage | Minimun Load | Maximun Load |
Po | Average efficiency | Output Regulation |
Ripple & Noise (Vp-p) | |
---|---|---|---|---|---|---|---|---|
Full Load | < 30% Load | |||||||
PW-IM040B2-1Y050Z | +5V | 0A | 8.00A | 40W | > 86% | ±5% | 100mV | 200mV |
PW-IM065B2-1Y120Z | +12V | 0A | 5.42A | 65W | > 89% | ±3% | 120mV | 200mV |
PW-IM065B2-1Y150Z | +15V | 0A | 4.34A | 65W | > 89% | ±3% | 120mV | 300mV |
PW-IM065B2-1Y190Z | +19V | 0A | 3.43A | 65W | > 89% | ±3% | 120mV | 300mV |
PW-IM065B2-1Y240Z | +24V | 0A | 2.71A | 65W | > 89% | ±3% | 200mV | 300mV |
PW-IM065B2-1Y280Z | +28V | 0A | 2.33A | 65W | > 89% | ±3% | 200mV | 350mV |
PW-IM065B2-1Y480Z | +48V | 0A | 1.36A | 65W | > 89% | ±2% | 200mV | 480mV |
PW-IM065B2-1Y540Z | +54V | 0A | 1.21A | 65W | > 89% | ±2% | 200mV | 480mV |
Note:
In/Output connector options: Z=J ( JST VH Type Connector or Equ. ), Z=M(TKP P8800I type).
Ripple and noise are measured at oscilloscope 20MHz bandwidth by a 10uF electrolytic capacitor and a 0.1uF ceramic capacitor in parallel at output connector.
The ripple and noise will be higher while load under 30% of rate load during Burst Mode operation.
The Burst Mode operation is to meet the latest efficiency regulations.
The output voltage is set by manufacturer.
The Burst Mode operation is to meet the latest efficiency regulations.
About Us
Power-Win is an esteemed power supply manufacturer headquartered in Taipei, Taiwan, with a rich legacy in the industry dating back to 1989. Specializing initially in PC power supplies, Power-Win has evolved its portfolio to encompass a diverse range of cutting-edge products, including AC/DC switching adapters, open frame power supplies, DC/DC ATX converters, and medical power supplies.
With over two decades of expertise in design, research, and manufacturing, Power-Win stands out as a trailblazer in anticipating and shaping market trends. Notably, our commitment to innovation is evident through the development of proprietary products that not only meet but exceed industry benchmarks. In addition to our in-house creations, Power-Win collaborates closely with clients on bespoke OEM/ODM projects, ensuring a seamless integration of their unique requirements.
Embracing the imperative for energy efficiency and environmental sustainability, Power-Win is at the forefront of the global movement towards green power solutions. Our latest offerings include efficiency level VI adapters, exemplifying our dedication to meeting the evolving demands of a conscientious and energy-efficient market. Complementing this, our open frame units are meticulously crafted to address the specific needs of our discerning clientele.
At Power-Win, we don't just provide power supplies; we empower businesses with reliable, innovative, and eco-friendly solutions. As we continue to chart new territories in power supply technology, we invite international buyers to join us in shaping the future of efficient and sustainable energy.
Business Type: Manufacturer/OEM
Main Products
Switching Power Supply, Medical Power Supply, Switching Adapters, DC/DC Converters, Open Frame Power Supply, Power Supply, Power Adapter, AC/DC Switching Adapter, AC/DC Adapter, Efficiency Level VI, Medical Adapter, AC/DC Open Frame