Foshan Kamchung Building Materials Co.,Ltd
15Products, 0News, 0Sell Leads
Products
light weight fireproof waterproof EPS cement foam sandwich panel energy saving and easy installationNew
SP008
Inquire Now
Description
Sandwich Panel
1. Introduction
Kam Chung sandwich panel is a new building material composed of calcium silicate panel, Portland cement and EPS foam. Compared with traditional brick wall, it is light in weight and can save a lot of construction space. Besides, it is waterproof, soundproof, weatherproof and fire-rated, which makes it versatile in applications.
2. Application
Kam Chung sandwich panel could be used as interior partition wall for apartment, office, factory, residential complex, shopping mall, KTV center, refrigerated storage etc. It’s excellent for buildings with special requirements on sound and temperature. Also its advantages of light weight and weather resistant make it a good exterior wall for warehouse, bungalow, temporary house, labor house, security guard room and so on.
1. Introduction
Kam Chung sandwich panel is a new building material composed of calcium silicate panel, Portland cement and EPS foam. Compared with traditional brick wall, it is light in weight and can save a lot of construction space. Besides, it is waterproof, soundproof, weatherproof and fire-rated, which makes it versatile in applications.
2. Application
Kam Chung sandwich panel could be used as interior partition wall for apartment, office, factory, residential complex, shopping mall, KTV center, refrigerated storage etc. It’s excellent for buildings with special requirements on sound and temperature. Also its advantages of light weight and weather resistant make it a good exterior wall for warehouse, bungalow, temporary house, labor house, security guard room and so on.
Features
Advantages
(1). Fireproof
(2). Insect-free
(3). Waterproof
(4). Soundproof
(5). Light weight
(6). Long lifespan
(7). Space saving
(8). Energy-saving
(9). Easy installation
(10). Environment-friendly
(1). Fireproof
(2). Insect-free
(3). Waterproof
(4). Soundproof
(5). Light weight
(6). Long lifespan
(7). Space saving
(8). Energy-saving
(9). Easy installation
(10). Environment-friendly
Specification
Specifications
Size (mm) 2440*610, or on request
Thickness (mm) 50 75 100 125
Bend Resistance Load (multiple of panel self weight) ≥1.5 ≥3 ≥4 ≥5.5
Fire Endurance (Hour) ≥1 ≥2.5 ≥4 ≥4.5
Sound Reduction Index (dB) ≥35 ≥37 ≥42 ≥47
Moisture content (%) ≤10 ≤10 ≤8 ≤8
Hanging Load (N) ≥1000
Shock Resistance (times) ≥5
Dry Shrinkage Rate (mm/m) ≤0.5
Thermal Conductivity (W/m•K) ≤0.2
Asbestos & Toxic Materials None
Non- combustibility GB 8624-2006 Class A
Water Penetration No drop of water on the other side
Size (mm) 2440*610, or on request
Thickness (mm) 50 75 100 125
Bend Resistance Load (multiple of panel self weight) ≥1.5 ≥3 ≥4 ≥5.5
Fire Endurance (Hour) ≥1 ≥2.5 ≥4 ≥4.5
Sound Reduction Index (dB) ≥35 ≥37 ≥42 ≥47
Moisture content (%) ≤10 ≤10 ≤8 ≤8
Hanging Load (N) ≥1000
Shock Resistance (times) ≥5
Dry Shrinkage Rate (mm/m) ≤0.5
Thermal Conductivity (W/m•K) ≤0.2
Asbestos & Toxic Materials None
Non- combustibility GB 8624-2006 Class A
Water Penetration No drop of water on the other side
Safety/Quality Approvals
SGS,JCT 564.1-2008
Other 1
5. Installation Processes for Sandwich Panel
(1). Draw lines on wall and floor according to drawing plan.
(2). Cut Kam Chung sandwich panels into suitable sizes with a circular saw.
(3). Mix cement and sand (ratio 1:2) and make it starchy. Then wet panels’ sides which are to be connected and put cement mixture on them.
(4). Fix the panels according to drawn lines and keep them upright. Use a jimmy to move the panels from bottom and make them tightly connected to each other.
(5). Push panels so as to again make sure they are tightly combined and squeeze out the cement mixture from connecting joints. Then use wedges to fix them.
(6). Use a 2-meter long guiding rule to check the flatness and perpendicularity of panels. Adjust them with a jimmy and fix them with wedges and steel bars.
(7). All joints between two boards must be reinforced with steel bars in size 6*200mm at 45 degree angle.
(8). After adjusting panel connections, use 30*30mm wedges to fix them. Then use a drill to make holes through panels and floor at a 45 degree angle. Hammer 6*200mm steel bars into the holes to tightly fasten panels on the ground.
(9). When adjusting and fixing are finished, fill all joints with cement mixture, including those connected with ceiling and floor. Pull out the wedges and stuff the holes with cement mixture.
(10). If embedded channels are needed, use a circular blade to cut on panels and cover them with cement mixture once embedding is finished.
(11). Last step is to cover the walls if necessary. Wallpaper can be pasted, wood plate nailed and ceramic tiles directly stuck on them with cement mixture. Door and windows could be fixed right on them as well.
(1). Draw lines on wall and floor according to drawing plan.
(2). Cut Kam Chung sandwich panels into suitable sizes with a circular saw.
(3). Mix cement and sand (ratio 1:2) and make it starchy. Then wet panels’ sides which are to be connected and put cement mixture on them.
(4). Fix the panels according to drawn lines and keep them upright. Use a jimmy to move the panels from bottom and make them tightly connected to each other.
(5). Push panels so as to again make sure they are tightly combined and squeeze out the cement mixture from connecting joints. Then use wedges to fix them.
(6). Use a 2-meter long guiding rule to check the flatness and perpendicularity of panels. Adjust them with a jimmy and fix them with wedges and steel bars.
(7). All joints between two boards must be reinforced with steel bars in size 6*200mm at 45 degree angle.
(8). After adjusting panel connections, use 30*30mm wedges to fix them. Then use a drill to make holes through panels and floor at a 45 degree angle. Hammer 6*200mm steel bars into the holes to tightly fasten panels on the ground.
(9). When adjusting and fixing are finished, fill all joints with cement mixture, including those connected with ceiling and floor. Pull out the wedges and stuff the holes with cement mixture.
(10). If embedded channels are needed, use a circular blade to cut on panels and cover them with cement mixture once embedding is finished.
(11). Last step is to cover the walls if necessary. Wallpaper can be pasted, wood plate nailed and ceramic tiles directly stuck on them with cement mixture. Door and windows could be fixed right on them as well.
Country of Origin
China
Main Export Markets
Asia&Africa
Payment Details
Payment Terms : T/TMinimum Order : 666 PiecesOthers : T/T by usd, 30% deposit and balance before shipment
Delivery Details
Lead Time : 15 DaysFOB Port : FoshanOthers : negotiable
About Us
Since her establishment in 2013, Foshan Kam Chung Building Materials Co.,Ltd has been pursuing her dream and fulfilling the mission of supplying safe and green building materials to the world. After years’ endeavor, we have improved some traditional building materials and make them better in performance, like calcium silicate board, fiber cement board, wood grain siding board, super tile adhesive, joint mixture and sandwich panel. At the same time, we have cooperated with partners and invented some new material, such as composite structure coating sheet (something like outdoor wallpaper for different structures and objects).
Our products have many applications, for example, walling, flooring, ceiling, siding, coating and wall partition, for house, mansion, shopping mall, workshop, warehouse, container house and even temporary house. We believe this one-stop purchasing experience will not only save your money and energy but also your troubles.
We serve and we care. We are not just a company selling building materials, but also a partner who treasures our relationship and hopes that our products can help people make good buildings. If you share the same mission, contact us and let’s build up a green future together.
Established Date: 2013/11/6
No. of Employees: 100 Persons
Business Type: Manufacturer/OEM
Main Products
fiber cement board;calcium silicate board;wood grain siding board;super tile adhesive;joint mixture;sandwich panel;gypsum board;composite structure coating sheet;