High Speed Precision Lathe
MH Series
Features :
● | Hardened ground bedways are made of high tensile cast iron. |
● | The main spindle is supported by high precision bearings can be used for precise and heavy cutting. |
● | All gears are made of Cr-Mo steel. They have been manufactured with carbonization hardness, precisely ground by precision gear grinding machine. |
● | Head stock have 12 steps speed and designed for quick and easy speed changes. |
● | All standard thread pitches can be obtained without changing the gears including MM. & INCH. threads |
● | An inner lock device is also equipped on this lathe to provide the thread cutting and autofeding operation at the same time. |
● | Longitudinal and cross feed possess safety device. If the carriage meets any obsruction on the bed, the overload safety device will release and prevent feed for avoiding damage. |
● | Electrical equipment with magnetic contactor and overload safety devices to avoid any destroy or accident on machine. |
● | The emergency brake pedal can be used for cutting the power and stopping the machine immediately and safe fast precise operation. |
● | The strong and rigid tailstock is easy to move and ensures maximum cutting accuracy for long distance support. |
Specification :
ITEM | 430 | 470 | ||||||||
430X760 | 430X1000 | 430X1500 | 470X1000 | 470X1500 | ||||||
Swing Over Bed | 430mm | 470mm | ||||||||
Swing Over Cross Slide | 240mm | 280mm | ||||||||
Swing Over Gap | 650mm | 690mm | ||||||||
Distance Between Centers | 760mm | 1000mm | 1500mm | 1000mm | 1500mm | |||||
HEADSTOCK | ||||||||||
Spindle Bore | 58mm x 78mm (OPT) | |||||||||
Type of Spindle Nose | A1-6 * A1-8 (OPT) | |||||||||
Taper of Center | MT No.4 | |||||||||
Number of Spindle Speeds | 12 Changes | |||||||||
Range of Spindle Speeds | 20-2000RPM * 40-2000R (OPT) | |||||||||
FEEDS & THREADS CUTTING | ||||||||||
Lead Screw | 35mm x 4 T.P.I. or P 6mm (OPT) | |||||||||
Range of Inch Threads | 4-56 TPI | |||||||||
Range of Metric Threads | 0.5-7mm | |||||||||
Range of Longitudinal Feeds | 0.05-0.8mm | |||||||||
Range of Cross Feeds | 0.02-0.36mm | |||||||||
CARRIAGE | ||||||||||
Cross slide Travel | 250mm | |||||||||
Compound Rest Travel | 125mm | |||||||||
TAILSTOCK | ||||||||||
Tail Stock Diameter of Spindle | 58mm | 68mm | ||||||||
Tail Stock Spindle Travel | 150mm | |||||||||
Tail Stock Taper of Center | MT No. #4 | |||||||||
Width of Bed | 300mm | |||||||||
Motor | 5HP * 7 1/2HP (OPT) | |||||||||
Weight(Approx)kg | 1700 | 1800 | 2100 | 1900 | 2150 | |||||
Packing Size(LxWxH)cm | 198x95x162 | 228x95x162 | 279x95x162 | 228x95x162 | 279x95x162 |
Standard ● Back Plate x 1pc ● Center MT #4 x 2pc ● Center Sleeve x 1pc ● Tool Post Wrench x 1pc ● Tool Box x 1set | Option Accessories ● 3-Jaw Scrool Chuck Ø9" x 1pc ● 4-Jaw Independent Chuck Ø10" or Ø12" x 1pc ● Follow Rest x 1pc ● Coolant Pump x 1 set ● Taper Attachment x 1set ● Steady Rest x 1pc ● Rear Cutter Rest x 1pc |