Hongdu Testing Equipment Co., Ltd
20Products, 5News, 0Sell Leads
Products
Power Plug Integrated Tester (HD-9)
Inquire Now
Description
Product Description
This tester is an integrated tester for plug. It is used to test the continuity, polarity, insulation, high-volt, leakage current of power plug. It meets the requirements of many international standards such as BIS, UL, CSA, VDE, BSI, DIN, CCC, IEC, etc. It is a totally automatic testing machine makes your operation more convenient and simple.
Features:
* All of the test subjects will be done automatically.
* The inner/outer high-volt output value and persistence period can be adjusted separately.
* Test speed very quick, all test subjects will be achieved less than 2 seconds.
* The PLC control system comes from Mitsubishi, Made In Japan.
* The relay comes from Schneider, Made In French
* If the specimen is incompetent, there is a alarm by buzzer and light.
* If the specimen is incompetent, this machine will stop at once and show you which subject is incompetent. Until you push the emergency button it will restart a new test. And a switch with key can be made to order to replace the high-volt starting button, it is very useful, because when a alarm happen, the operators can not restart this machine, only after managers have checked over and restart it by the key the machine will work again.
* When test over, the specimen will be pushed out automatically, and a "T" or other characters could be marked on it (English characters only).
Technical parameter:
Polarity test: Test E, L, N wires in sequence
Insulation test high-volt: DC 500V +- 10%
Insulation resistance: 2, 7, 20, 50, 100MΩ (can be made to order)
Inner high-volt: 0~5KV +-5% (adjustable)
Outer high-volt: 0~5KV +-5% (adjustable)
Leakage current: 0.5, 1, 3, 5, 10mA (can be made to order)
Rated power: 500VA
Cylinder power: Compressed air with 0.4 to 0.6Mpa
Dimensions: 675mm W, 480mm D, 520mm H
Power source: AC 220V +-10%, 50Hz
Weight: 35 kg, approximate
NOTICE:
1. Inner high-volt is applied between L, N, E wires, and the outer high-volt is applied between L, N, E wires and jacket.
2. Both 3-wire and 2-wire power plug can be tested by this machine.
This tester is an integrated tester for plug. It is used to test the continuity, polarity, insulation, high-volt, leakage current of power plug. It meets the requirements of many international standards such as BIS, UL, CSA, VDE, BSI, DIN, CCC, IEC, etc. It is a totally automatic testing machine makes your operation more convenient and simple.
Features:
* All of the test subjects will be done automatically.
* The inner/outer high-volt output value and persistence period can be adjusted separately.
* Test speed very quick, all test subjects will be achieved less than 2 seconds.
* The PLC control system comes from Mitsubishi, Made In Japan.
* The relay comes from Schneider, Made In French
* If the specimen is incompetent, there is a alarm by buzzer and light.
* If the specimen is incompetent, this machine will stop at once and show you which subject is incompetent. Until you push the emergency button it will restart a new test. And a switch with key can be made to order to replace the high-volt starting button, it is very useful, because when a alarm happen, the operators can not restart this machine, only after managers have checked over and restart it by the key the machine will work again.
* When test over, the specimen will be pushed out automatically, and a "T" or other characters could be marked on it (English characters only).
Technical parameter:
Polarity test: Test E, L, N wires in sequence
Insulation test high-volt: DC 500V +- 10%
Insulation resistance: 2, 7, 20, 50, 100MΩ (can be made to order)
Inner high-volt: 0~5KV +-5% (adjustable)
Outer high-volt: 0~5KV +-5% (adjustable)
Leakage current: 0.5, 1, 3, 5, 10mA (can be made to order)
Rated power: 500VA
Cylinder power: Compressed air with 0.4 to 0.6Mpa
Dimensions: 675mm W, 480mm D, 520mm H
Power source: AC 220V +-10%, 50Hz
Weight: 35 kg, approximate
NOTICE:
1. Inner high-volt is applied between L, N, E wires, and the outer high-volt is applied between L, N, E wires and jacket.
2. Both 3-wire and 2-wire power plug can be tested by this machine.
About Us
Hongdu testing equipment Co., Ltd established in 2000, we focuses on the provision of products and services to our clients through high quality and competitive price. We supply standard or customized solutions and products for many test, measurement and quality control tasks required in the world of cable, wire, socket, plug, switch, plastic and rubber testing. All of our products are complying with the requirements of many standards, such as UL, iec, VDE, bis, CSA and so on. R&d center established with east China university of science and technology in 2006 makes us could provide more professional products and after service.
The key products from hongdu range include aging oven, cold chamber, constant temperature and humidity tester, glow wire apparatus, flame test chamber, tracking flame test chamber, spark tester, wire useful life tester, wire abrasion tester, flexing test apparatus, tumbling barrel apparatus, temperature rising tester, plug and socket tester, load machine, electronic tensile tester, power plug integrated tester and much more.
Established Date: 2000/1/1
No. of Employees: 199 Persons
Business Type: Manufacturer/OEM
Main Products
Aging Oven, Tensile Testing Machine, Cold Chamber, Loading Machine. Flame Test Chamber, Plug Flexing Tester, Power Plug Integrated Tester,