Yeson(H.K) Technology Co,.Ltd
19Products, 0News, 0Sell Leads
Products
1.25Gbps SFP Optical Transceiver, 20km Reach , SFP Module
1.25Gbps SFP Optical Transceiver, 20km Reach , SFP Module
Inquire Now
Description
YT-OC24-20
1.25Gbps SFP Transceiver, 20km Reach
Features
1. Dual data-rate of 1.25Gbps/1.063Gbps operation
2. 1310nm FP laser and PIN photodetector for 20km transmission
3. Compliant with SFP MSA and SFF-8472 with duplex LC receptacle
4. Digital Diagnostic Monitoring:Internal Calibration or External Calibration
5. Compatible with SONET OC-24-LR-1
6. Compatible with RoHS
7. +3.3V single power supply
8. Operating case temperature:
Standard : 0 to +70C
Industrial : -40 to +85C
Applications
1. Gigabit Ethernet
2. Fiber Channel
3. Switch to Switch interface
4. Switched back plane applications
5. Router/Server interface
6. Other optical transmission systems
Description
The SFP transceivers are high performance, cost effective modules supporting dual data-rate of 1.25Gbps/1.0625Gbps and 20km transmission distance with SMF.
The transceiver consists of three sections: a FP laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements.
The transceivers are compatible with SFP Multi-Source Agreement (MSA) and SFF-8472. For further information, please refer to SFP MSA.
1.25Gbps SFP Transceiver, 20km Reach
Features
1. Dual data-rate of 1.25Gbps/1.063Gbps operation
2. 1310nm FP laser and PIN photodetector for 20km transmission
3. Compliant with SFP MSA and SFF-8472 with duplex LC receptacle
4. Digital Diagnostic Monitoring:Internal Calibration or External Calibration
5. Compatible with SONET OC-24-LR-1
6. Compatible with RoHS
7. +3.3V single power supply
8. Operating case temperature:
Standard : 0 to +70C
Industrial : -40 to +85C
Applications
1. Gigabit Ethernet
2. Fiber Channel
3. Switch to Switch interface
4. Switched back plane applications
5. Router/Server interface
6. Other optical transmission systems
Description
The SFP transceivers are high performance, cost effective modules supporting dual data-rate of 1.25Gbps/1.0625Gbps and 20km transmission distance with SMF.
The transceiver consists of three sections: a FP laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements.
The transceivers are compatible with SFP Multi-Source Agreement (MSA) and SFF-8472. For further information, please refer to SFP MSA.
Features
Notes:
1. The optical power is launched into SMF.
2. PECL input, internally AC-coupled and terminated.
3. Measured with a PRBS 27-1 test pattern @1250Mbps, BER ???10-12.
4. Internally AC-coupled.
1. The optical power is launched into SMF.
2. PECL input, internally AC-coupled and terminated.
3. Measured with a PRBS 27-1 test pattern @1250Mbps, BER ???10-12.
4. Internally AC-coupled.
Specification
Notes:
Plug Seq.: Pin engagement sequence during hot plugging.
1) TX Fault is an open collector output, which should be pulled up with a 4.7k~10k峏 resistor on the host board to a voltage between 2.0V and Vcc+0.3V. Logic 0 indicates normal operation; Logic 1 indicates a laser fault of some kind. In the low state, the output will be pulled to less than 0.8V.
2) TX Disable is an input that is used to shut down the transmitter optical output. It is pulled up within the module with a 4.7k~10k峏 resistor. Its states are:
Low (0 to 0.8V): Transmitter on
(>0.8V, < 2.0V): Undefined
High (2.0 to 3.465V): Transmitter Disabled
Open: Transmitter Disabled
3) Mod-Def 0,1,2. These are the module definition pins. They should be pulled up with a 4.7k~10k峏 resistor on the host board. The pull-up voltage shall be VccT or VccR.
Mod-Def 0 is grounded by the module to indicate that the module is present
Mod-Def 1 is the clock line of two wire serial interface for serial ID
Mod-Def 2 is the data line of two wire serial interface for serial ID
4) LOS is an open collector output, which should be pulled up with a 4.7k~10k峏 resistor. Pull up voltage between 2.0V and Vcc+0.3V. Logic 1 indicates loss of signal; Logic 0 indicates normal operation. In the low state, the output will be pulled to less than 0.8V.
5) RD-/+: These are the differential receiver outputs. They are internally AC-coupled 100 differential lines which should be terminated with 100峏 (differential) at the user SERDES.
6) TD-/+: These are the differential transmitter inputs. They are internally AC-coupled, differential lines with 100峏 differential termination inside the module.
Plug Seq.: Pin engagement sequence during hot plugging.
1) TX Fault is an open collector output, which should be pulled up with a 4.7k~10k峏 resistor on the host board to a voltage between 2.0V and Vcc+0.3V. Logic 0 indicates normal operation; Logic 1 indicates a laser fault of some kind. In the low state, the output will be pulled to less than 0.8V.
2) TX Disable is an input that is used to shut down the transmitter optical output. It is pulled up within the module with a 4.7k~10k峏 resistor. Its states are:
Low (0 to 0.8V): Transmitter on
(>0.8V, < 2.0V): Undefined
High (2.0 to 3.465V): Transmitter Disabled
Open: Transmitter Disabled
3) Mod-Def 0,1,2. These are the module definition pins. They should be pulled up with a 4.7k~10k峏 resistor on the host board. The pull-up voltage shall be VccT or VccR.
Mod-Def 0 is grounded by the module to indicate that the module is present
Mod-Def 1 is the clock line of two wire serial interface for serial ID
Mod-Def 2 is the data line of two wire serial interface for serial ID
4) LOS is an open collector output, which should be pulled up with a 4.7k~10k峏 resistor. Pull up voltage between 2.0V and Vcc+0.3V. Logic 1 indicates loss of signal; Logic 0 indicates normal operation. In the low state, the output will be pulled to less than 0.8V.
5) RD-/+: These are the differential receiver outputs. They are internally AC-coupled 100 differential lines which should be terminated with 100峏 (differential) at the user SERDES.
6) TD-/+: These are the differential transmitter inputs. They are internally AC-coupled, differential lines with 100峏 differential termination inside the module.
Safety/Quality Approvals
ROHS,CE,FCC
Other 1
1310nm, 1.25Gbps, 20km, 0繙C ~ +70繙C
1310nm, 1.25Gbps, 20km, 0繙C ~ +70繙C, With Digital Diagnostic Monitoring
1310nm, 1.25Gbps, 20km, -40繙C ~ +85繙C
1310nm, 1.25Gbps, 20km, -40繙C ~ +85繙C, With Digital Diagnostic Monitoring
1310nm, 1.25Gbps, 20km, 0繙C ~ +70繙C, With Digital Diagnostic Monitoring
1310nm, 1.25Gbps, 20km, -40繙C ~ +85繙C
1310nm, 1.25Gbps, 20km, -40繙C ~ +85繙C, With Digital Diagnostic Monitoring
Country of Origin
china
Main Export Markets
Global
Payment Details
Payment Terms : TT,Western Union,PaypalMinimum Order : 1 Pieces
Delivery Details
Lead Time : 3 DaysFOB Port : shenzhen
About Us
Welcome to Yeson(H.K) Technology Co,.Ltd
Yeson Tech, is one of the powerful and high-tech companies specialized in researching, manufacturing and marketing of optical and fiber communication technologies. Our major products are media converter, digital video optical transmission systems and Optical Transceiver Modules .All of these products are widely applied in many industries like telecom ,traffic, government organization, campus network ,oil industry, electric power system, and public security etc. Yeson is one of the biggest and fastest growing multi products manufacturing and service provider(including OEM,ODM service and customized) in China.
Yeson invests 15 percent of our sales revenue into R&D. After years of technical innovation and hard work, Yeson can provide high quality products for telecom business and cctv business, and also can design a new product base on clients'' requirement within one week. We are able to deliver cost-effective solutions to serve our customers successfully and timely.
Our products are all certified with ROHS,CE,FCC standards. If you are interested in any items, we shall be pleased to provide you with competitive price, superior quality and fast delivery. We sincerely look forward to estabishing partnership with you. contact us please, we will help you improve productivity, reduce expenses, extend the life of their fleet, and so much more!
No. of Employees: 20 Persons
Business Type: Exporter
Main Products
SFP Module&Fiber optic patch cord,SFP Transceiver,sfp copper rj45 module,1.25g sfp,sfp xfp gbic qsfp programmer...