Zhengzhou Jinyu Thermoelectric Material Co.,Ltd
11Products, 0News, 0Sell Leads
Products
FeCrAl
FeCrAl
Inquire Now
Description
Fe-Cr-Al (Iron-Chromium-Aluminum) alloys are available as wire, strip, welded and seamless tubes; All these product forms are available from stock for fast deliveries. The high aluminum content, in combination with the high chromium content causes the scaling temperature to increase up to 1425 C (2600F ); Under the headline heat resistance, these FeCrAl alloys are compared with commonly used Fe and Ni base alloys. As can be seen from that table, the FeCrAl alloys have superior properties as compared to the other alloys.
Features
Iron Chromium Aluminum alloys are widely used in industrial electrical furnace, electrical oven, home applicance, electrical heator, infrared settings, etc.
Specification
Max contineous working temperature: 1250 C.
Melting Temperature: 1500 C
Electric Resistivity: 1.42 ohm mm2/m
Diameter: 0.01mm-10mm
Has been used extensively as heating elements in industrial furnaces and electrical kilns.
Has less hot strength than Tophet alloys but much higher melting point.
Melting Temperature: 1500 C
Electric Resistivity: 1.42 ohm mm2/m
Diameter: 0.01mm-10mm
Has been used extensively as heating elements in industrial furnaces and electrical kilns.
Has less hot strength than Tophet alloys but much higher melting point.
Safety/Quality Approvals
Max contineous working temperature: 1250 C.
Melting Temperature: 1500 C
Electric Resistivity: 1.42 ohm mm2/m
Diameter: 0.01mm-10mm
Has been used extensively as heating elements in industrial furnaces and electrical kilns.
Has less hot strength than Tophet alloys but much higher melting point.
Melting Temperature: 1500 C
Electric Resistivity: 1.42 ohm mm2/m
Diameter: 0.01mm-10mm
Has been used extensively as heating elements in industrial furnaces and electrical kilns.
Has less hot strength than Tophet alloys but much higher melting point.
Other 1
Max contineous working temperature: 1250 C.
Melting Temperature: 1500 C
Electric Resistivity: 1.42 ohm mm2/m
Diameter: 0.01mm-10mm
Has been used extensively as heating elements in industrial furnaces and electrical kilns.
Has less hot strength than Tophet alloys but much higher melting point.
Melting Temperature: 1500 C
Electric Resistivity: 1.42 ohm mm2/m
Diameter: 0.01mm-10mm
Has been used extensively as heating elements in industrial furnaces and electrical kilns.
Has less hot strength than Tophet alloys but much higher melting point.
About Us
Dengfeng jinyu Thermo-electric Material Co.,Ltd is a high-tech enterprise through ISO 9001: 2000 quality management system certification, and our factory got the honor of environmental protection.
Our leading products include all kinds of Molybdenum disilicide (MoSi2) heating elements, silicon carbide (SiC) heating elements, furnaces, Laboratory furnaces, muffle furnace, chamber furnace, tube furnace, electric furnaces, lass furnaces, vacuum furnaces, high temperature furnaces, ceramics furnaces, ovens, tungsten and molybdenum products, and so on. MoSi2 heating elements have 1700nd 1800 types, the Shapes are U, W right angle U, Bending type U, equal diameter rod and so on. The diameter scopes are: 3/6, 4/9, 5/10, 6/10, 6/12, 6/14, 7/14, 8/16, 9/18 and12/24mm. The SiC heating elements have ED (equal diameter rod) type, w-type, u-type, SCR(double spiral)-type, SC(single spiral) type, UX(slot) type, the diameter scope are: 8 to 54mm, the length are in 5m. Also we may provide the molybdenum powder, the molybdenum bar and plate, the molybdenum wire and rod, the molybdenum crucible, the molybdenum electrode, the tungsten powder, tungsten electrode, tungsten crucible, tungsten wire, tungsten rod and so on. You can select our products that meet your demands. If you have special request, please let us know, we are looking forward to provide you good service and reasonable price.
Thanks for your choosing products from Jinyu
Business Type: Manufacturer/OEM
Main Products
industrial