Products
Damp-Heat Tester
Inquire Now
Description
- Technical index:
- Power: 380V, 3-, 50/60HZ 110A
- Temperature range: 50°C~120°C
- Humidity range: 20%~95% RH
- Accuracy: 1) temperature ± 0.3°C;2) humidity ± 2.5% RH
- Uniformity: 1) temperature ± 2.0°C;2) humidity ± 3.0% RH
- Uniformity test: measured at T=85°C, RH=85%; set 9 points for temperature measurement and 2 points for humidity.
- Inner wall is above 50 cm; within 20 min after temperature/humidity meets the setting value, the distribution uniformity of temperature/humidity can meet the aforesaid requirement.
Features
- Temperature descending speed (idle run): no less than 3°C/min. Temperature ascending speed (idle run): no less than 3°C/min.
- Sample load 400kg: temperature rise – no less than 2.0°C /min; in the range of -40°C ~ +85°C.
- Temperature down-no less than 2.0°C/min; in the range of -40°C ~ +85°C.
- Humidity: follow IEC 61646-10.12 to make wet refrigeration test; if temperature rises up for 100°C per minute, when 85°C is reached, wait for 10 min. and humidity shall reach 85%RH ± 5%RH.
- Dew point temperature range: 10°C to +85°C
- Test space: 200 x 250 x 280 (W x H x D) cm double door, outer chamber size: 220 x 290 x 430 (W x H x D) cm
- Accept customized order.
- Itemized Introduction Material Applied:
- Inner/outer wall materials: apply SUS#304 plate.
- Insulation material: imported high-strength PU foamed insulation material.
- Condensate-proof parts: use K-type tube’s heating energy and membrane-type electrical heatig wire to prevent condensate.
- Double-layer high-pressure, low-temperature-resistant silicon packing
- An external-connected test hole
- Vacuum glass window inserted with fog-removing wires
- Isolated-type PL-style high-luminance lighting
- A set of RO pure water system; 1/4"; 1.5L/min.
About Us
KING DESIGN is the expert in the field of Vibration, shock, and the environment test Equipment; since 1983 King Design has established the technique knowledge in the field and won many enterprises' confidence and support. The brief features of King Design's service provided are listed as follows: Equipment Sales Service, CNLA Laboratory Service, Vibration Diagnostic and Structure improvement consultant, Environment Stress Screen (ESS).
Business Type: None
Main Products
Vibration, Vibration Test System, Vibration Simulator, Shock Tester, Drop Tester, E.S.S, Environmental Stress Screening, LED Tester, Humidity Tester, Test Equipment, Test Machine, Air Bumping, Free-fall, Shock Amplifier, Environment Test Equipment