Buy Lead
Locking Wire, Shroud Wire
2017/09/18 ~ 2018/03/18
Dear Sir
hope you are doing well
do you know this parts?
our customer in Switzerland working on the repair of a Siemens rotor.
We have to re-assemble stage 8 to 14 with new blades (from STB) + the last 2 stages (after NDT replace the old blades).
The locking wires have damaged during disassembly.
For the assembly we need a new set of locking wires.
A) Spring plates (see attached drawing 1CDS 305 755 - blade assembly strips)
For the re assembly of the last 2 stages of blades, we need spring plates. 65 + 201 = 275 pieces (pos. 25) Dimensions from both stages is the same: 18mm long, 5mm wide, 1mm thick and bend to 2 mm.
Material type on your proposal.
B) Locking wires (see attached drawing 1CDS 305 755 - blade
assembly strips)
Locking wires for stage AA-AA = Ø649,28
- 13 segments for 4 blades pos. 26 + 29
- 1 segment for 3 blades pos. 27 + 30
- 3 segments for 1 blade pos. 28 + 31
- 1 segment for 1 blade pos. 32 + 33 + 34
Locking wires for stage AB-AB = Ø628,86
- 9 segments for 5 blades pos. 35 + 38
- 1 segment for 3 blades pos. 36 + 39
- 2 segments for 1 blade pos. 37 + 40
- 1 segment for 1 blade pos. 41 + 42 + 43
Material type on your proposal.
C) Shroud wires. (see attached drawing 1CDS 305 755 – shroud wire)
For stage 8 to 11, wire ø 2,0 mm - total length 20 meter
For stage 12, wire ø 2,5 mm – total length 8 meter
For stage 13 + 14, wire ø 3 mm – total length 15 meter
Material type on your proposal.
If possible we would like to receive a price and delivery time.
We would need these materials mid october.
destination :Switzerland
I will remain.