POWER-WIN TECHNOLOGY CORP.
125Products, 10News, 0Sell Leads
Products
140W AC-DC Desktop AdaptorAC Inlet-C14
PW-M140A2-1YXXXG
Inquire Now
Description
*Medical Approvals
*3-prong IEC 320-C14, Class I
*Medical safety approved ( 2x MOPP between primary to secondary )
Suitable for BF application with appropriate system consideration.
*Altitude during operation: Medical up to 5000m.
*≦ 0.15W No Load Input Power
*Touch current less than 100uA
*Meet IEC60601-1-2 Ed4:2014
*3 year warranty
*3-prong IEC 320-C14, Class I
*Medical safety approved ( 2x MOPP between primary to secondary )
Suitable for BF application with appropriate system consideration.
*Altitude during operation: Medical up to 5000m.
*≦ 0.15W No Load Input Power
*Touch current less than 100uA
*Meet IEC60601-1-2 Ed4:2014
*3 year warranty
Features
*Dimension :L170 ×W64.8 ×H38.5mm ( 6.69"×2.55"×1.52")
*Weight : 0.61 kgs. ( 1.34 lbs. )
*Weight : 0.61 kgs. ( 1.34 lbs. )
Specification
Electrical specifications
- Input range : 90 - 264VAC
- Frequency : 47 - 63Hz
- Power Factor : > 0.95 @115VAC; > 0.90 @230VAC @full load
- Inrush current : < 50A peak @115VAC; < 100A peak @230VAC cold start @25°C
- Input current (rms) : 2.5A @115VAC; 1.3A @230VAC max.
- Efficiency : > 89% (Average) 25 %, 50 %, 75 % and 100 % of full load @ 115/230VAC
- Touch current < 100uA @264VAC
- Maximum output power (Po) : 140 Watts convection cooling
- Hold-up time : > 20ms typical @full load, 115VAC
- Short circuit protection : Auto-recovery
- Over load protection : 110% to 150% maximum power, Auto-recovery
- Over voltage protection : Shutdown and latch off, AC recycle
Safety standards
- UL/cUL 60601-1 3.1rd Edition
- TUV EN60601-1 3.1rd Edition
- CB IEC 60601-1 3.1rd Edition
EMC standards
- EN60601-1-2 Ed4:2015
- IEC60601-1-2 Ed4:2014
- EN 55011 Class B
- FCC Part 18 Class B
- CE
Environmental
- Operating temperature : -20 to +60°C (Refer to "Derating Curve")
- Cooling: Convection-cooling
- Storage temperature: -20°C to +85°C
- Humidity: Non-condensing 0% to 95%
- MTBF : > 120,000 hours @full load and 25°C ambient temperature based on MIL-HDBK-217F
Standard output wires
- AWM 1571 # 14 AWG / 1C + SHIELDING, UL 80°C 30V VW-1, 1050 mm.
- AWM 1185 # 16 AWG / 1C + SHIELDING, UL 80°C 300V VW-1, 1050 mm.
- Depends on customers requirements.
DC OUTPUT & FEATURES
Model No. | Output Rating | Po | Output Regulation | Ripple & Noise (Vp-p) |
DOE Efficiency | EU ErP | ||
PW-M130A2-1Y120G | +12V | 10.84A | 130W | ±5% | 120mV | Level VI | Tier 2 | |
PW-M130A2-1Y150G | +15V | 8.67A | 130W | ±5% | 150mV | Level VI | Tier 2 | |
PW-M140A2-1Y190G | +19V | 7.37A | 140W | ±5% | 190mV | Level VI | Tier 2 | |
PW-M140A2-1Y240G | +24V | 5.84A | 140W | ±3% | 240mV | Level VI | Tier 2 | |
PW-M140A2-1Y280G | +28V | 5.00A | 140W | ±3% | 280mV | Level VI | Tier 2 | |
PW-M140A2-1Y360G | +36V | 3.89A | 140W | ±3% | 280mV | Level VI | Tier 2 | |
PW-M140A2-1Y480G | +48V | 2.92A | 140W | ±3% | 280mV | Level VI | Tier 2 | |
PW-M140A2-1Y540G | +54V | 2.60A | 140W | ±3% | 280mV | Level VI | Tier 2 |
Note:1. Ripple and noise are measured at oscilloscope 20MHz bandwidth by a 10uF electrolytic capacitor and a 0.1uF ceramic capacitor in parallel at output connector.
Derating curve
About Us
Power-Win is an esteemed power supply manufacturer headquartered in Taipei, Taiwan, with a rich legacy in the industry dating back to 1989. Specializing initially in PC power supplies, Power-Win has evolved its portfolio to encompass a diverse range of cutting-edge products, including AC/DC switching adapters, open frame power supplies, DC/DC ATX converters, and medical power supplies.
With over two decades of expertise in design, research, and manufacturing, Power-Win stands out as a trailblazer in anticipating and shaping market trends. Notably, our commitment to innovation is evident through the development of proprietary products that not only meet but exceed industry benchmarks. In addition to our in-house creations, Power-Win collaborates closely with clients on bespoke OEM/ODM projects, ensuring a seamless integration of their unique requirements.
Embracing the imperative for energy efficiency and environmental sustainability, Power-Win is at the forefront of the global movement towards green power solutions. Our latest offerings include efficiency level VI adapters, exemplifying our dedication to meeting the evolving demands of a conscientious and energy-efficient market. Complementing this, our open frame units are meticulously crafted to address the specific needs of our discerning clientele.
At Power-Win, we don't just provide power supplies; we empower businesses with reliable, innovative, and eco-friendly solutions. As we continue to chart new territories in power supply technology, we invite international buyers to join us in shaping the future of efficient and sustainable energy.
Business Type: Manufacturer/OEM
Main Products
Switching Power Supply, Medical Power Supply, Switching Adapters, DC/DC Converters, Open Frame Power Supply, Power Supply, Power Adapter, AC/DC Switching Adapter, AC/DC Adapter, Efficiency Level VI, Medical Adapter, AC/DC Open Frame