POWER-WIN TECHNOLOGY CORP.Taiwan

113Products, 10News, 4Sell Leads

All Products (113)

Product Category

Products

Description :
*3-pole IEC320-C14 AC inlet, Class I
*Output voltage range from +12V to +48V
*Meet DOE level VI and EU tier 2 Efficiency requirements
*No load Power consumption < 150mW
*Power ON LED indicator
*3 year warranty
Features :
*Dimension : L170 × W64.8× H38.5 mm ( 6.69"×2.55"×1.52" )
*Weight : 0.61 kgs. ( 1.34 lbs )
Specification :
Electrical specifications
  • Input range : 90 - 264VAC
  • Frequency : 47 - 63Hz
  • Power Factor : > 0.95 @115VAC; > 0.90 @230VAC @full load
  • Inrush current : < 75A peak @115VAC; < 150A peak @230VAC cold start @25°C
  • Input current (rms) : 3A @90VAC; 1.5A @264VAC max.
  • Efficiency : > 89% @average Load, 115/230VAC
  • Maximum output power (Po) : 120Watts
  • Hold–up time : > 20ms typical @full load, 115VAC
  • Short Circuit Protection: Auto-recovery
  • Over Load Protection: Auto-recovery
  • Over Voltage Protection: Shutdown and latch off, AC recycle
Safety standards
  • UL 60950-1
  • UL 62368-1
  • CSA C22.2-No.60950-1
  • CSA C22.2-No.62368-1
  • TUV EN60950-1
  • TUV EN62368-1
  • CB IEC 60950-1
  • CB IEC 62368-1
EMC standards
  • FCC Class B
  • CISPR22 Class B
  • EN 55032 Class B
  • CE.
Environmental
  • Operating temperature :-20 to +70°C (Derate linearly 2.0% per °C from 41 to 70°C & Derate linearly 1.0% per °C from 0 to -20°C)
  • Storage temperature : -20°C to +85°C
  • Humidity: 10% ~ 90%.
  • MTBF : > 1200,000 hours at full load and 25°C ambient temperature
Standard output cable
  • AWM 1571 # 14AWG 1C + SHIELDING, UL 80°C 30V VW-1, 1,000 mm.
  • AWM 2464 # 16AWG 3C + SHIELDING, UL 80°C 300V VW-1, 1,000 mm.
  • Depends on customers requirements.
DC OUTPUT & FEATURES
Model Output Rating Po O/P regulation Ripple & Noise
(Vp-p)
Efficiency Level
PW-120A2-1Y120G 12V 10A 120W ±5% 240mV VI
PW-120A2-1Y150G 15V 8.00A 120W ±5% 240mV VI
PW-120A2-1Y190G 19V 6.32A 120W ±5% 240mV VI
PW-120A2-1Y240G 24V 5.00A 120W ±5% 240mV VI
PW-120A2-1Y280G 28V 4.29A 120W ±5% 240mV VI
PW-120A2-1Y480G 48V 2.50A 120W ±5% 240mV VI
Note:1. Ripple and noise are measured at oscilloscope 20MHz bandwidth by a 10uF electrolytic capacitor and a 0.1uF ceramic capacitor in parallel at output connector.

Send Message (Your message will be sent directly)

Please enter only English message between 20 and 900 characters

Contact Information

Please enter First and Last Name


More Exposure,
More Buyers Match,
Unlimited Number of Products.
Apply now !
Wonpro Co., Ltd.