POWER-WIN TECHNOLOGY CORP.Taiwan

113Products, 10News, 4Sell Leads

All Products (113)

Product Category

Products

Description :
*3-pole IEC320-C14 AC inlet, Class I
*Output voltage range from +9V to +48V
*Meet Efficiency Level VI & CoC V5 Tier 2 requirements
*No load Power consumption < 150mW
*Power ON LED indicator
*3 year warranty
Features :
*Dimension : L132 × W69 × H40 mm ( 5.2" × 2.72" × 1.57" )
*Weight : 0.44 kgs. ( 0.97 lbs. )
Specification :
Electrical specifications
  • Input range : 90 - 264VAC
  • Frequency : 47 - 63Hz
  • Power Factor : > 0.95 @115VAC; > 0.90 @230VAC @full load
  • Inrush current : < 75A peak @115VAC; < 150A peak @230VAC cold start @25°C
  • Input current (rms) : 2A @90VAC; 1A @264VAC max.
  • Efficiency : > 89% @average load, 115/230VAC (9V > 88%)
  • Maximum output power (Po) : 80Watts
  • Hold–up time : > 20ms typical @full load, 115VAC
  • Short Circuit Protection: Auto-recovery
  • Over Load Protection: Auto-recovery
  • Over Voltage Protection: Shutdown and latch off, AC recycle
Safety standards
  • UL 60950-1
  • UL 62368-1
  • CSA C22.2-No.60950-1
  • CSA C22.2-No.62368-1
  • TUV EN60950-1
  • TUV EN62368-1
  • CB IEC 60950-1
  • CB IEC 62368-1
EMC standards
  • FCC Class B
  • CISPR22 Class B
  • EN 55032 Class B
  • CE.
Environmental
  • Operating temperature : 0 to +60°C (Derate linearly 2.5% per °C from 41 to 60°C)
  • Storage temperature : -10°C to +85°C
  • Humidity: 10% ~ 90%.
  • MTBF : > 120,000 hours at full load and 25°C ambient temperature DC OUTPUT
Standard output cable
  • AWM 1571 # 14 AWG / 1C + SHIELDING, UL 80°C 30V VW-1, 1050 mm.
  • AWM 1185 # 16 AWG / 1C + SHIELDING, UL 80°C 300V VW-1, 1050 mm.
  • Depends on customers requirements.
DC OUTPUT & FEATURES
Model Output Rating Po O/P regulation Ripple & Noise
(Vp-p)
Efficiency Level EU ErP
PW-072A4-1Y090A 9V 8A 72W ±5% 240mV V Tier 1
PW-080A4-1Y120A 12V 6.67A 80W ±5% 240mV VI Tier 2
PW-080A4-1Y150A 15V 5.34A 80W ±5% 240mV VI Tier 2
PW-080A4-1Y180A 18V 4.45A 80W ±5% 240mV VI Tier 2
PW-080A4-1Y240A 24V 3.34A 80W ±5% 240mV VI Tier 2
PW-080A4-1Y280A 28V 2.86A 80W ±5% 240mV VI Tier 2
PW-080A4-1Y480A 48V 1.67A 80W ±5% 240mV VI Tier 2
Note:1. Ripple and noise are measured at oscilloscope 20MHz bandwidth by a 10uF electrolytic capacitor and a 0.1uF ceramic capacitor in parallel at output connector.

Send Message (Your message will be sent directly)

Please enter only English message between 20 and 900 characters

Contact Information

Please enter First and Last Name


More Exposure,
More Buyers Match,
Unlimited Number of Products.
Apply now !
Wonpro Co., Ltd.