Products
UltraViolet Light-emitting diode
SSL, SML Series
Inquire Now
Description
Within the wavelength spectrum, the range of UV light can be broken into three primary areas. The Ultraviolet A, or UV-A long wave, falls within the range of 315 nanometers to 420 nanometers. Ultraviolet B or, or UV-B medium wave, is within the 280 nanometers to 315 nanometer range. And finally Ultraviolet C, or UV-C short wave, is with the 100 nanometers to 280 nanometer range. Each area within the UV spectrum offers distinct benefits in industries ranging from medical to forensic science to test and measurement.
"As long as the mercury lamp can be used to kill the future of ultraviolet LED market," the industry said. First, the UV LED sterilization can be free to control the band; Second, the UV LED unit area intensity than the mercury lamp more than 1000 times higher, but the same light output energy consumption is only 1/10 of the mercury lamp; LED is not affected by temperature, concentration, activity and other chemical equilibrium conditions; Fourth, the sterilization process of non-toxic, no residue, no smell; Fifth, sterilization principle for the destruction of the virus, the biological center of bacteria DNA (deoxyribonucleic acid) And RNA (ribonucleic acid) structure, so that immediate death or loss of reproductive capacity, no need to replace the drugs do not have to use combination of pharmaceuticals, especially for air, water and surface disinfection.
QuasarBrite UV LED SSL-LXTO46xxx Series
QuasarBrite™ UV LEDs Combine Longer Lifespan, Increased Cost Savings and Energy Savings and Superior Light Performance Lumex’s family of UV LEDs offer enhanced durability with their robust TO-46 packaging and glass lens. Through this innovative design, Lumex’s UV LEDs experience less degradation over the lifespan of the LED (approximately 50,000 hours), which in turn provides enhanced product performance. Lumex’s UV LEDs have up to 70% lower energy consumption than CCFL technology.
TitanBrite™ 2-Watt High Power UV LEDsSML-LXL8047UVC
New 2-Watt High Power UV LEDs Offer Energy Savings of 70% and Space Savings of Up to 90%! Lumex’s new TitanBrite 2 watt UV LEDs offer twice the power with the same footprint as a standard 1 watt package. In addition, the surface mounted design allows the 2W UV LED to provide up to 90%, 50% or 30% space savings
compared to CCFLs, UV filament lamps and standard through-hole UV LEDs. These exciting new UV LEDS are ideal for a wide range of applications that require bright, intense light with low energy consumption and have space limitations.
"As long as the mercury lamp can be used to kill the future of ultraviolet LED market," the industry said. First, the UV LED sterilization can be free to control the band; Second, the UV LED unit area intensity than the mercury lamp more than 1000 times higher, but the same light output energy consumption is only 1/10 of the mercury lamp; LED is not affected by temperature, concentration, activity and other chemical equilibrium conditions; Fourth, the sterilization process of non-toxic, no residue, no smell; Fifth, sterilization principle for the destruction of the virus, the biological center of bacteria DNA (deoxyribonucleic acid) And RNA (ribonucleic acid) structure, so that immediate death or loss of reproductive capacity, no need to replace the drugs do not have to use combination of pharmaceuticals, especially for air, water and surface disinfection.
QuasarBrite UV LED SSL-LXTO46xxx Series
QuasarBrite™ UV LEDs Combine Longer Lifespan, Increased Cost Savings and Energy Savings and Superior Light Performance Lumex’s family of UV LEDs offer enhanced durability with their robust TO-46 packaging and glass lens. Through this innovative design, Lumex’s UV LEDs experience less degradation over the lifespan of the LED (approximately 50,000 hours), which in turn provides enhanced product performance. Lumex’s UV LEDs have up to 70% lower energy consumption than CCFL technology.
TitanBrite™ 2-Watt High Power UV LEDsSML-LXL8047UVC
New 2-Watt High Power UV LEDs Offer Energy Savings of 70% and Space Savings of Up to 90%! Lumex’s new TitanBrite 2 watt UV LEDs offer twice the power with the same footprint as a standard 1 watt package. In addition, the surface mounted design allows the 2W UV LED to provide up to 90%, 50% or 30% space savings
compared to CCFLs, UV filament lamps and standard through-hole UV LEDs. These exciting new UV LEDS are ideal for a wide range of applications that require bright, intense light with low energy consumption and have space limitations.
Features
QuasarBrite UV LED SSL-LXTO46xxx Series • Available in 355nm, 365nm, 377mn, 385nm, 405nm and 415nm wavelengths at 4-6mW
• Longer lifespan; greater than 50,000 hours
• TO-46 package, with glass lens in a through-hole format
• Custom wavelengths are available
TitanBrite™ 2-Watt High Power UV LEDsSML-LXL8047UVC • 8mm round top dome SMT package
• Available in standard 405nm wavelengths
• Features a 100° viewing angle
• Longer lifespan; greater than 50,000 hours
• TO-46 package, with glass lens in a through-hole format
• Custom wavelengths are available
TitanBrite™ 2-Watt High Power UV LEDsSML-LXL8047UVC • 8mm round top dome SMT package
• Available in standard 405nm wavelengths
• Features a 100° viewing angle
Specification
Customization
Safety/Quality Approvals
RoHS、REACH
Other 1
* 230nm-400nm : Optical Sensors & Instrumentation
* 230nm-280nm : UV ID Verification, Barcodes
* 240nm-280nm : Sterilization of surface areas and water
* 250nm-405nm : Forensic & Bodily fluid detection & analysis
* 270nm-300nm : Protein Analysis, Drug Discovery
* 300nm-320nm : Medical Light Therapy
* 300nm-365nm : Polymer and Ink printing
* 375nm-395nm : Counterfeit Detection
* 390nm-410nm : Superficial Sterilization
• Bacterial and superficial sterilization for medical device technologies related to phototherapy, dental, and dermatology equipment.
• Counterfeit detection, photo catalysis
• Biohazard detection
• Test & Measurement
• Security
• Bacteriological research
• Aquariums
• Food sterilization
• Currency verification
• Fingerprint ID on computer mouse with UV light
• UV laser passing through a cuvette for DNA testing
• UV ID Verification, Barcodes
• Protein Analysis, Drug Discovery
• Optical sensors and instrumentation
• Forensic and bodily fluid detection and analysis
• Medical light therapy
• Polymer and ink printing
* 230nm-280nm : UV ID Verification, Barcodes
* 240nm-280nm : Sterilization of surface areas and water
* 250nm-405nm : Forensic & Bodily fluid detection & analysis
* 270nm-300nm : Protein Analysis, Drug Discovery
* 300nm-320nm : Medical Light Therapy
* 300nm-365nm : Polymer and Ink printing
* 375nm-395nm : Counterfeit Detection
* 390nm-410nm : Superficial Sterilization
• Bacterial and superficial sterilization for medical device technologies related to phototherapy, dental, and dermatology equipment.
• Counterfeit detection, photo catalysis
• Biohazard detection
• Test & Measurement
• Security
• Bacteriological research
• Aquariums
• Food sterilization
• Currency verification
• Fingerprint ID on computer mouse with UV light
• UV laser passing through a cuvette for DNA testing
• UV ID Verification, Barcodes
• Protein Analysis, Drug Discovery
• Optical sensors and instrumentation
• Forensic and bodily fluid detection and analysis
• Medical light therapy
• Polymer and ink printing
About Us
RE-ENERGY CO., LTD., established in August 2016, serves as the primary business entity and the general agent for the following projects:
• VARTA Micro Battery
• FDK (Fujitsu Denki Kagaku) Battery
• LUMEX LED & LCD
• MURATA Coin Battery
• Rechargeable Battery Design Assembly
Our company boasts a dedicated team with over a decade of professional experience in customized battery solutions, as well as a specialized LED & LCD application team focused on tailored product designs. Our product range extends to various sectors, including consumer electronics, industrial applications, automotive technologies, and the medical field, with a primary focus on the Taiwan, China, and Southeast Asian markets.
At RE-Energy Co., Ltd., we uphold the highest standards of excellence in every aspect of our design and production processes. Our commitment is to provide customers with impeccable delivery, top-tier product quality, safety, and exceptional post-sales support, all geared towards enhancing our customers' competitiveness in the market.
Looking ahead, the future development of RE-Energy Co., Ltd. will involve collaborative efforts and partnerships aimed at further expanding our reach and capabilities in serving our valued customers.
Business Type: None
Main Products
Battery, Coin Battery, LED, LCD, Rechargeable Battery, Battery Design, SONY Coin Battery, FDK(Fujitsu Denki Kagaku) Battery, Liquid Crystal Display, Seven-segment Display, Light Guide, VARTA Micro Battery