Dekelon Paper Making Machinery Co.,Ltd.
9Products, 0News, 0Sell Leads
Products
facial paper machine/serviette paper making machineNew
1575 type
Inquire Now
Description
The tissue machine is designed for a single story workshop layer. It should be fully installed on the workshop floor. We offer a wide selection of tissue making machines, in different models, including 1092, 1575, 1760, 1880, 2100, 2400, and 2800. Relevant equipment can be equipped according to the basis weight, speed, output and other parameters.
The main equipment structure:
1. Back rolls: 峖380 ? 2100mm of one set, including bearings, bearing pedestal, stand column, bolt, and the thickness is 15mm, hardness is 95 簞 簣 2 簞 with bearings 312.
2. Cylinder section: 峖1250mm?1950mm stainless steel cylinder mould 2 sets, including frame, bearing shells, bearing pedestal, bearing 3615, 峖380 ? 2000 couch roll 2 sets, the rubber hardness is 38 簞 簣 2 簞, thickness is 25mm, with bearings 312.
3. Water squeezing section: smooth roll峖270 ? 2100 one set and bottom rubber roller峖270 ? 2100mm one set, equipped with bearings 113513, with two groups of lever pressure device.
4. Touch roll section: 峖450 ? 2000 one touch roll, rubber hardness is 95 簞 簣 2 簞, and the thickness is 23mm, the crown is 0.6mm, with a good supporting arm, two groups of峖320 three pneumatic tire pressure device, with bearing 113622 and one set of air control box.
5. Main press section: natural granite stone roll峖500 ? 2000mm one set, equipped with a scraper, and a峖450 ? 2000 rubber roller, the rubber hardness is 90 簞 簣 2 簞, thickness is 23mm, the crown is 0.5mm, with bearing 113622/113622 , and a good press arm, 峖250 two groups of cylinder pressure device, and one set of air control box.
6. Gloss section: 峖400 ? 2000 a calendar rubber roller, rubber hardness is 95 簞 簣 2 簞, thickness is 20mm, equipped with 113620 bearing and support, arm, spanner positive and negative pressure device two groups.
7. dryer section: two 峖 2500 ? 2000 dryers, with internal and external machining, surface roughness ??0.4, cylinder surface hardness HB ??200, equipped with 3,113,156 bearing, bearing pedestal, M12 ? 170 big gears and a heavy scraper in the first cylinder, a scraper in the second cylinder, with a double-cylinder steam cover for the first cylinder, one set of峖700 axial fan and a motor.
more info please contact :
The main equipment structure:
1. Back rolls: 峖380 ? 2100mm of one set, including bearings, bearing pedestal, stand column, bolt, and the thickness is 15mm, hardness is 95 簞 簣 2 簞 with bearings 312.
2. Cylinder section: 峖1250mm?1950mm stainless steel cylinder mould 2 sets, including frame, bearing shells, bearing pedestal, bearing 3615, 峖380 ? 2000 couch roll 2 sets, the rubber hardness is 38 簞 簣 2 簞, thickness is 25mm, with bearings 312.
3. Water squeezing section: smooth roll峖270 ? 2100 one set and bottom rubber roller峖270 ? 2100mm one set, equipped with bearings 113513, with two groups of lever pressure device.
4. Touch roll section: 峖450 ? 2000 one touch roll, rubber hardness is 95 簞 簣 2 簞, and the thickness is 23mm, the crown is 0.6mm, with a good supporting arm, two groups of峖320 three pneumatic tire pressure device, with bearing 113622 and one set of air control box.
5. Main press section: natural granite stone roll峖500 ? 2000mm one set, equipped with a scraper, and a峖450 ? 2000 rubber roller, the rubber hardness is 90 簞 簣 2 簞, thickness is 23mm, the crown is 0.5mm, with bearing 113622/113622 , and a good press arm, 峖250 two groups of cylinder pressure device, and one set of air control box.
6. Gloss section: 峖400 ? 2000 a calendar rubber roller, rubber hardness is 95 簞 簣 2 簞, thickness is 20mm, equipped with 113620 bearing and support, arm, spanner positive and negative pressure device two groups.
7. dryer section: two 峖 2500 ? 2000 dryers, with internal and external machining, surface roughness ??0.4, cylinder surface hardness HB ??200, equipped with 3,113,156 bearing, bearing pedestal, M12 ? 170 big gears and a heavy scraper in the first cylinder, a scraper in the second cylinder, with a double-cylinder steam cover for the first cylinder, one set of峖700 axial fan and a motor.
more info please contact :
Features
1. Back rolls: 峖380 ? 2100mm of one set, including bearings, bearing pedestal, stand column, bolt, and the thickness is 15mm, hardness is 95 簞 簣 2 簞 with bearings 312.
2. Cylinder section: 峖1250mm?1950mm stainless steel cylinder mould 2 sets, including frame, bearing shells, bearing pedestal, bearing 3615, 峖380 ? 2000 couch roll 2 sets, the rubber hardness is 38 簞 簣 2 簞, thickness is 25mm, with bearings 312.
3. Water squeezing section: smooth roll峖270 ? 2100 one set and bottom rubber roller峖270 ? 2100mm one set, equipped with bearings 113513, with two groups of lever pressure device.
4. Touch roll section: 峖450 ? 2000 one touch roll, rubber hardness is 95 簞 簣 2 簞, and the thickness is 23mm, the crown is 0.6mm, with a good supporting arm, two groups of峖320 three pneumatic tire pressure device, with bearing 113622 and one set of air control box.
5. Main press section: natural granite stone roll峖500 ? 2000mm one set, equipped with a scraper, and a峖450 ? 2000 rubber roller, the rubber hardness is 90 簞 簣 2 簞, thickness is 23mm, the crown is 0.5mm, with bearing 113622/113622 , and a good press arm, 峖250 two groups of cylinder pressure device, and one set of air control box.
6. Gloss section: 峖400 ? 2000 a calendar rubber roller, rubber hardness is 95 簞 簣 2 簞, thickness is 20mm, equipped with 113620 bearing and support, arm, spanner positive and negative pressure device two groups.
7. dryer section: two 峖 2500 ? 2000 dryers, with internal and external machining, surface roughness ??0.4, cylinder surface hardness HB ??200, equipped with 3,113,156 bearing, bearing pedestal, M12 ? 170 big gears and a heavy scraper in the first cylinder, a scraper in the second cylinder, with a double-cylinder steam cover for the first cylinder, one set of峖700 axial fan and a motor.
8. Both of the two cylinders are the box-type rack frame, the first cylinder is trislot base plate, the other one is single groove base plate, completed with distance tubes, foot screws, connecting bolts, and sizing blocks.
9. 峖157 guide roll, and expander roll. The Guide roller is covered with glass fiber reinforced plastics, equipped with 208/209 bearings. 205 bearing is equipped with lead roller, completed according to the drawing numbers.
10. Three sets of manual corrector, three sets of gear boxes blanket tight. One set of felt whipper, equipped with one Y90L-6-1.5KW motor.
11. One set of 峖350/峖250/峖400 three?oller calendar.
12. One set of 峖 900 ? 1800 cylinder reeling machine, equipped with bearings 113528 and three 峖157 paper winding rolls.
13. Drive section: five turning points, completed with reducers, small gears, couplings, drive rails and bolts. The dryer is equipped with two sets of JZQ-500 reducer, the main press is equipped with JZQ-500 reducer, and the calender is equipped with JZQ-400 reducer, the reeling machine is equipped with JZQ-350 reducer.
14. Three vacuum boxes, which are made of hot-rolled steel plate welding, with high polymer panels, are equipped with a 15-type vacuum pump and an Y160L-4-15KW motor.
15. Electrical department of the main machine: one set of frequency converter, the main press is equipped with Y180L-4-22KW motor, the dryer is equipped with two sets of Y180M-4-18.5KW motors, the calendar machine is equipped with one Y160L-4-15KW motor, and the reeling machine is equipped with one Y132S-4-5.5KW motor.
16. One set of 1575 model reeling machine, which is equipped with one YCT225-4A-11KW motor.
2. Cylinder section: 峖1250mm?1950mm stainless steel cylinder mould 2 sets, including frame, bearing shells, bearing pedestal, bearing 3615, 峖380 ? 2000 couch roll 2 sets, the rubber hardness is 38 簞 簣 2 簞, thickness is 25mm, with bearings 312.
3. Water squeezing section: smooth roll峖270 ? 2100 one set and bottom rubber roller峖270 ? 2100mm one set, equipped with bearings 113513, with two groups of lever pressure device.
4. Touch roll section: 峖450 ? 2000 one touch roll, rubber hardness is 95 簞 簣 2 簞, and the thickness is 23mm, the crown is 0.6mm, with a good supporting arm, two groups of峖320 three pneumatic tire pressure device, with bearing 113622 and one set of air control box.
5. Main press section: natural granite stone roll峖500 ? 2000mm one set, equipped with a scraper, and a峖450 ? 2000 rubber roller, the rubber hardness is 90 簞 簣 2 簞, thickness is 23mm, the crown is 0.5mm, with bearing 113622/113622 , and a good press arm, 峖250 two groups of cylinder pressure device, and one set of air control box.
6. Gloss section: 峖400 ? 2000 a calendar rubber roller, rubber hardness is 95 簞 簣 2 簞, thickness is 20mm, equipped with 113620 bearing and support, arm, spanner positive and negative pressure device two groups.
7. dryer section: two 峖 2500 ? 2000 dryers, with internal and external machining, surface roughness ??0.4, cylinder surface hardness HB ??200, equipped with 3,113,156 bearing, bearing pedestal, M12 ? 170 big gears and a heavy scraper in the first cylinder, a scraper in the second cylinder, with a double-cylinder steam cover for the first cylinder, one set of峖700 axial fan and a motor.
8. Both of the two cylinders are the box-type rack frame, the first cylinder is trislot base plate, the other one is single groove base plate, completed with distance tubes, foot screws, connecting bolts, and sizing blocks.
9. 峖157 guide roll, and expander roll. The Guide roller is covered with glass fiber reinforced plastics, equipped with 208/209 bearings. 205 bearing is equipped with lead roller, completed according to the drawing numbers.
10. Three sets of manual corrector, three sets of gear boxes blanket tight. One set of felt whipper, equipped with one Y90L-6-1.5KW motor.
11. One set of 峖350/峖250/峖400 three?oller calendar.
12. One set of 峖 900 ? 1800 cylinder reeling machine, equipped with bearings 113528 and three 峖157 paper winding rolls.
13. Drive section: five turning points, completed with reducers, small gears, couplings, drive rails and bolts. The dryer is equipped with two sets of JZQ-500 reducer, the main press is equipped with JZQ-500 reducer, and the calender is equipped with JZQ-400 reducer, the reeling machine is equipped with JZQ-350 reducer.
14. Three vacuum boxes, which are made of hot-rolled steel plate welding, with high polymer panels, are equipped with a 15-type vacuum pump and an Y160L-4-15KW motor.
15. Electrical department of the main machine: one set of frequency converter, the main press is equipped with Y180L-4-22KW motor, the dryer is equipped with two sets of Y180M-4-18.5KW motors, the calendar machine is equipped with one Y160L-4-15KW motor, and the reeling machine is equipped with one Y132S-4-5.5KW motor.
16. One set of 1575 model reeling machine, which is equipped with one YCT225-4A-11KW motor.
Specification
1575
Safety/Quality Approvals
CE
Country of Origin
China
Main Export Markets
Asia,Middle East,Africa,South America
Payment Details
Payment Terms : TT/LC/OtherMinimum Order : 1 Sets
Delivery Details
Lead Time : 30-60 DaysFOB Port : Shanghai/Qingdao
About Us
Founded in 1982, DKL paper making machinery Co.,Ltd. now has developed into a combination of designing, developing,manufacturing and sales. In the past 34 years , DKL is striven to meet and exceed customer’s expectations. We have finished more than 2000 turnkey projects both domestic and abroad, and earned good reputation for our good quality and after-sale service.
Since the foundation of the company, we always hold great sincerity to provide products at high quality and competitive price, and spend large scale of our profit into development&research department, learning from advanced technologies home and abroad,which makes us now one of the leading manufacturers in paper related machinery industry in China. Covering writing printing paper, tissue paper, kraft paper, corrugated paper,cardboard paper,egg tray fields. Our products are highly praised by customers from Ukraine,Kyrgyzstan,Uzbekistan,Kazakhstan,Egypt,Angola,South Africa,Mauritius,Nigeria,Brazil,Argentina,Libya,and Chile.
We also improve our machines equipment,while controlling the quality of products.We are endeavoring to perform as the most prospective actor in paper related machinery industry ,and make greater contribution to the development of it.
Established Date: 1982/9/1
No. of Employees: 100-500 Persons
Business Type: Manufacturer/OEM
Main Products
paper machine, tissue paper machine, toilet paper machine,egg tray mahcine