DOING
7Products, 0News, 0Sell Leads
Products
Waste plastic to fuel pyrolysis plant
6T/8T/10T/20T/30T
Inquire Now
Description
Nowadays,with human exploiting and environment degradation,natural energy especially oil energy is becoming less and less .on the contrary, municipal solid wastes are becoming more and more.Tire pyrolysis plant of Doing can not produce natural energy ,but also can turn waste tire,waste plastic ,waste rubber to fuel .
Waste plastic pyrolysis involves subjecting plastic and tire to high temperature of 400 to 450 degree Celsius, in absence of oxygen. In case of oxygen is present plastic will start burning. During pyrolysis plastic and tire breaks down into smaller molecules of pyrolysis oil, pyrolysis gas and carbon black. Like plastic and tire, pyrolysis end products are also hydrocarbons.
Waste plastic pyrolysis involves subjecting plastic and tire to high temperature of 400 to 450 degree Celsius, in absence of oxygen. In case of oxygen is present plastic will start burning. During pyrolysis plastic and tire breaks down into smaller molecules of pyrolysis oil, pyrolysis gas and carbon black. Like plastic and tire, pyrolysis end products are also hydrocarbons.
Features
Features of The newest waste plastic to fuel pyrolysis plant as follows:
1. raw material is cheap and easy to provide.
2. 100% wastage tyre recycling is achieved.
3. no soil, water or air pollution is observed during and after the process.
4. creates economically valuable products out of wastage plastic.
5. cost-effective waste plastic recycling technology in the world.
6. it is a 100 % pollution free process, thus making eco-friendly environment.
7. the process can be applied to all rubber based materials
8. the system creates an alternate source of energy to replace petroleum products and natural gas.
9. system gives the opportunity to governments and local administrations to deal with the wastage plastic problem.
10.The process of pyrolysis has duration of 15 to 18 hours, depending on the quantity and size of plastic. During the process different vacuum values are applied in pre-determined temperatures in different phases. Different gases are obtained and the condensed gas is stored as a fuel oil in tank.
1. raw material is cheap and easy to provide.
2. 100% wastage tyre recycling is achieved.
3. no soil, water or air pollution is observed during and after the process.
4. creates economically valuable products out of wastage plastic.
5. cost-effective waste plastic recycling technology in the world.
6. it is a 100 % pollution free process, thus making eco-friendly environment.
7. the process can be applied to all rubber based materials
8. the system creates an alternate source of energy to replace petroleum products and natural gas.
9. system gives the opportunity to governments and local administrations to deal with the wastage plastic problem.
10.The process of pyrolysis has duration of 15 to 18 hours, depending on the quantity and size of plastic. During the process different vacuum values are applied in pre-determined temperatures in different phases. Different gases are obtained and the condensed gas is stored as a fuel oil in tank.
Specification
Converting waste plastic to fuel pyrolysis plant, waste plastic to fuel pyrolysis plant can convertusedwaste plastic to crude oil for fuel.The waste plastic crude oil is a fuel oil and a good energy for heating.
High quality:
1.Indirect heating by boiler heating system can greatly increase the service life of our waste plastic to fuel pyrolysis plant.
2.Multiple methods to eliminate color and odor of the distilled oil which ensures the final fuel oil with a high quality.
High quality:
1.Indirect heating by boiler heating system can greatly increase the service life of our waste plastic to fuel pyrolysis plant.
2.Multiple methods to eliminate color and odor of the distilled oil which ensures the final fuel oil with a high quality.
Safety/Quality Approvals
A.Safety
1.Safety is the most important factor in the whole process.
2.We had successfully researched some safety devices which ensure waste plastic to fuel pyrolysis plantwork safely.
3.Safety valves, alarming device and the pressure gauge etc.
4.We also have oil-water separator which can stop the oil gas recycle to the reactor, which could avoid the accident.
1.Safety is the most important factor in the whole process.
2.We had successfully researched some safety devices which ensure waste plastic to fuel pyrolysis plantwork safely.
3.Safety valves, alarming device and the pressure gauge etc.
4.We also have oil-water separator which can stop the oil gas recycle to the reactor, which could avoid the accident.
Other 1
Waste tyres reduce reuse recycle machinery can disposal tires and rubber to fuel oil. Usually plastic oil yield is about 20%-95% (according to plastic type).
Fuel oil from waste plastic reduce reuse recycle machinery can be using as heating material into cement factory, glass making factory, steel factory, brick factory boiler etc.
Waste plastic to fuel pyrolysis plant:
Carbon black from waste plastic to fuel pyrolysis plant can be application to :electric cable jacketing,rubber additive,heat isolation,black colorant in rubber materials.
We put out heart and soul into servingour customers. It is a wisdom choice to have a corporation with us. We are Henan DOING Mechanical Equipment Co,Ltd. Welcome your visit!
Fuel oil from waste plastic reduce reuse recycle machinery can be using as heating material into cement factory, glass making factory, steel factory, brick factory boiler etc.
Waste plastic to fuel pyrolysis plant:
Carbon black from waste plastic to fuel pyrolysis plant can be application to :electric cable jacketing,rubber additive,heat isolation,black colorant in rubber materials.
We put out heart and soul into servingour customers. It is a wisdom choice to have a corporation with us. We are Henan DOING Mechanical Equipment Co,Ltd. Welcome your visit!
About Us
We DOING Company as a leading manufacturer in China has specialized in all kinds of waste recycling machinery and the supporting equipments for about 10 years, 5 years experience for domestic market, and 5 years for foreign trading. Now we have the waste tire/plastic recycling machine, waste oil recycling machine, waste cable wire recycling machine, waste aluminum plastic panel recycling machine, waste PCB recycling machine and waste home appliance recycling machine which can be provided for you.
By now we have installed hundreds of machines in about 30 countries:
Africa: Nigeria, Congo, Egypt, Uganda;
Europe: Romania, Poland, Italy, Macedonia, Albania, Turkey;
Asia: Malaysia, Pakistan, India, Thailand, Iran, Bangladesh, Lebanon, Jordan;
America: Mexico, Ecuador, Haiti, Guatamala, Aruba, Panama, Jamaica, etc.
Except the machine, we have professional engineers can be sent to your factory for installation, commissioning and training your workers after you buy the machine.
No. of Employees: 150 Persons
Business Type: Manufacturer/OEM
Main Products
waste plastic to fuel oil pyrolysis plant, waste tyre to fuel oil pyrolysis plant, waste il to diesel oil distillation plant