shenzhen sinovo telecom co ltd
20Products, 4News, 0Sell Leads
Products
CFP ER 100G 40KM
Inquire Now
Description
100G CFP ER High Technology by SINOVO Telecom
DateTime:2016/10/14 0:00:00
The optical transceiver module is used for high-speed Ethernet and Telecommunication networking applications.
The module supports data rates from 103.1Gb/s to 111.8Gb/s, which allows the module to support
a wide variety of networking applications including 100GBASE-ER4 and OTU-4.
It is offered in a cost-effective CFP form factor with a standard MSA compliant interface.
By applying the latest IC technology, this 100Gbps module not only provides for low power
consumption but also offering the latest features and protocols.
The module supports a link length up to 40km on standard single mode fiber such as SMF-28.
100Gbps optical signal is carried over four wavelengths. The module consists of a 1:4 optical MUX and DeMUX,
EML-based high performance optical transmitter and PIN based low-noise optical receiver to provide E/O and O/E signal conversion
and an advanced Gearbox IC chip to offer electrical signal translation between 10X10Gbps/11.2Gbps and 4X25Gbps/28Gbps.
SOA (semiconductor optical amplifier) is used for 1310nm optical signal re-generation in high-speed Ethernet
and Telecommunication networking application. This 10-lane 10Gbps electrical signal is fully compliant with 802.3ba CAUI specifications and OUT-4.
A built-in PRBS generator and error detector enhances a system’s testability.
CFP module supports MDIO interface for integrated digital optical monitoring.
Up to 40km transmission on SMF
1300nm LAN-WDM EML-based transmitter with optical MUX for CFP.
Low-noise PIN receiver with optical DeMUX
Low-noise SOA with typical 17dB gain.
High speed I/O electrical interface (CAUI or OTL4.4)
Support MDIO interface with integrated digital monitoring
Single +3.3V power supply
Low power consumption
Operating case temperature: -5 ~ +70°C
PRBS generation and error detection
High-speed data communications
Inter rack connections
Optical component test systems
DateTime:2016/10/14 0:00:00
The optical transceiver module is used for high-speed Ethernet and Telecommunication networking applications.
The module supports data rates from 103.1Gb/s to 111.8Gb/s, which allows the module to support
a wide variety of networking applications including 100GBASE-ER4 and OTU-4.
It is offered in a cost-effective CFP form factor with a standard MSA compliant interface.
By applying the latest IC technology, this 100Gbps module not only provides for low power
consumption but also offering the latest features and protocols.
The module supports a link length up to 40km on standard single mode fiber such as SMF-28.
100Gbps optical signal is carried over four wavelengths. The module consists of a 1:4 optical MUX and DeMUX,
EML-based high performance optical transmitter and PIN based low-noise optical receiver to provide E/O and O/E signal conversion
and an advanced Gearbox IC chip to offer electrical signal translation between 10X10Gbps/11.2Gbps and 4X25Gbps/28Gbps.
SOA (semiconductor optical amplifier) is used for 1310nm optical signal re-generation in high-speed Ethernet
and Telecommunication networking application. This 10-lane 10Gbps electrical signal is fully compliant with 802.3ba CAUI specifications and OUT-4.
A built-in PRBS generator and error detector enhances a system’s testability.
CFP module supports MDIO interface for integrated digital optical monitoring.
Up to 40km transmission on SMF
1300nm LAN-WDM EML-based transmitter with optical MUX for CFP.
Low-noise PIN receiver with optical DeMUX
Low-noise SOA with typical 17dB gain.
High speed I/O electrical interface (CAUI or OTL4.4)
Support MDIO interface with integrated digital monitoring
Single +3.3V power supply
Low power consumption
Operating case temperature: -5 ~ +70°C
PRBS generation and error detection
High-speed data communications
Inter rack connections
Optical component test systems
Features
100G CFP ER High Technology by SINOVO Telecom
DateTime:2016/10/14 0:00:00
The optical transceiver module is used for high-speed Ethernet and Telecommunication networking applications.
The module supports data rates from 103.1Gb/s to 111.8Gb/s, which allows the module to support
a wide variety of networking applications including 100GBASE-ER4 and OTU-4.
It is offered in a cost-effective CFP form factor with a standard MSA compliant interface.
By applying the latest IC technology, this 100Gbps module not only provides for low power
consumption but also offering the latest features and protocols.
The module supports a link length up to 40km on standard single mode fiber such as SMF-28.
100Gbps optical signal is carried over four wavelengths. The module consists of a 1:4 optical MUX and DeMUX,
EML-based high performance optical transmitter and PIN based low-noise optical receiver to provide E/O and O/E signal conversion
and an advanced Gearbox IC chip to offer electrical signal translation between 10X10Gbps/11.2Gbps and 4X25Gbps/28Gbps.
SOA (semiconductor optical amplifier) is used for 1310nm optical signal re-generation in high-speed Ethernet
and Telecommunication networking application. This 10-lane 10Gbps electrical signal is fully compliant with 802.3ba CAUI specifications and OUT-4.
A built-in PRBS generator and error detector enhances a system’s testability.
CFP module supports MDIO interface for integrated digital optical monitoring.
Up to 40km transmission on SMF
1300nm LAN-WDM EML-based transmitter with optical MUX for CFP.
Low-noise PIN receiver with optical DeMUX
Low-noise SOA with typical 17dB gain.
High speed I/O electrical interface (CAUI or OTL4.4)
Support MDIO interface with integrated digital monitoring
Single +3.3V power supply
Low power consumption
Operating case temperature: -5 ~ +70°C
PRBS generation and error detection
High-speed data communications
Inter rack connections
Optical component test systems
DateTime:2016/10/14 0:00:00
The optical transceiver module is used for high-speed Ethernet and Telecommunication networking applications.
The module supports data rates from 103.1Gb/s to 111.8Gb/s, which allows the module to support
a wide variety of networking applications including 100GBASE-ER4 and OTU-4.
It is offered in a cost-effective CFP form factor with a standard MSA compliant interface.
By applying the latest IC technology, this 100Gbps module not only provides for low power
consumption but also offering the latest features and protocols.
The module supports a link length up to 40km on standard single mode fiber such as SMF-28.
100Gbps optical signal is carried over four wavelengths. The module consists of a 1:4 optical MUX and DeMUX,
EML-based high performance optical transmitter and PIN based low-noise optical receiver to provide E/O and O/E signal conversion
and an advanced Gearbox IC chip to offer electrical signal translation between 10X10Gbps/11.2Gbps and 4X25Gbps/28Gbps.
SOA (semiconductor optical amplifier) is used for 1310nm optical signal re-generation in high-speed Ethernet
and Telecommunication networking application. This 10-lane 10Gbps electrical signal is fully compliant with 802.3ba CAUI specifications and OUT-4.
A built-in PRBS generator and error detector enhances a system’s testability.
CFP module supports MDIO interface for integrated digital optical monitoring.
Up to 40km transmission on SMF
1300nm LAN-WDM EML-based transmitter with optical MUX for CFP.
Low-noise PIN receiver with optical DeMUX
Low-noise SOA with typical 17dB gain.
High speed I/O electrical interface (CAUI or OTL4.4)
Support MDIO interface with integrated digital monitoring
Single +3.3V power supply
Low power consumption
Operating case temperature: -5 ~ +70°C
PRBS generation and error detection
High-speed data communications
Inter rack connections
Optical component test systems
Specification
100G CFP ER High Technology by SINOVO Telecom
DateTime:2016/10/14 0:00:00
The optical transceiver module is used for high-speed Ethernet and Telecommunication networking applications.
The module supports data rates from 103.1Gb/s to 111.8Gb/s, which allows the module to support
a wide variety of networking applications including 100GBASE-ER4 and OTU-4.
It is offered in a cost-effective CFP form factor with a standard MSA compliant interface.
By applying the latest IC technology, this 100Gbps module not only provides for low power
consumption but also offering the latest features and protocols.
The module supports a link length up to 40km on standard single mode fiber such as SMF-28.
100Gbps optical signal is carried over four wavelengths. The module consists of a 1:4 optical MUX and DeMUX,
EML-based high performance optical transmitter and PIN based low-noise optical receiver to provide E/O and O/E signal conversion
and an advanced Gearbox IC chip to offer electrical signal translation between 10X10Gbps/11.2Gbps and 4X25Gbps/28Gbps.
SOA (semiconductor optical amplifier) is used for 1310nm optical signal re-generation in high-speed Ethernet
and Telecommunication networking application. This 10-lane 10Gbps electrical signal is fully compliant with 802.3ba CAUI specifications and OUT-4.
A built-in PRBS generator and error detector enhances a system’s testability.
CFP module supports MDIO interface for integrated digital optical monitoring.
Up to 40km transmission on SMF
1300nm LAN-WDM EML-based transmitter with optical MUX for CFP.
Low-noise PIN receiver with optical DeMUX
Low-noise SOA with typical 17dB gain.
High speed I/O electrical interface (CAUI or OTL4.4)
Support MDIO interface with integrated digital monitoring
Single +3.3V power supply
Low power consumption
Operating case temperature: -5 ~ +70°C
PRBS generation and error detection
High-speed data communications
Inter rack connections
Optical component test systems
DateTime:2016/10/14 0:00:00
The optical transceiver module is used for high-speed Ethernet and Telecommunication networking applications.
The module supports data rates from 103.1Gb/s to 111.8Gb/s, which allows the module to support
a wide variety of networking applications including 100GBASE-ER4 and OTU-4.
It is offered in a cost-effective CFP form factor with a standard MSA compliant interface.
By applying the latest IC technology, this 100Gbps module not only provides for low power
consumption but also offering the latest features and protocols.
The module supports a link length up to 40km on standard single mode fiber such as SMF-28.
100Gbps optical signal is carried over four wavelengths. The module consists of a 1:4 optical MUX and DeMUX,
EML-based high performance optical transmitter and PIN based low-noise optical receiver to provide E/O and O/E signal conversion
and an advanced Gearbox IC chip to offer electrical signal translation between 10X10Gbps/11.2Gbps and 4X25Gbps/28Gbps.
SOA (semiconductor optical amplifier) is used for 1310nm optical signal re-generation in high-speed Ethernet
and Telecommunication networking application. This 10-lane 10Gbps electrical signal is fully compliant with 802.3ba CAUI specifications and OUT-4.
A built-in PRBS generator and error detector enhances a system’s testability.
CFP module supports MDIO interface for integrated digital optical monitoring.
Up to 40km transmission on SMF
1300nm LAN-WDM EML-based transmitter with optical MUX for CFP.
Low-noise PIN receiver with optical DeMUX
Low-noise SOA with typical 17dB gain.
High speed I/O electrical interface (CAUI or OTL4.4)
Support MDIO interface with integrated digital monitoring
Single +3.3V power supply
Low power consumption
Operating case temperature: -5 ~ +70°C
PRBS generation and error detection
High-speed data communications
Inter rack connections
Optical component test systems
About Us
Shenzhen Sinovo Telecom co.,limited offer the next generation optical interconnect solutions for datacenter.We develop and manufacture innovative optical network devices, interconnection solutions, IDC optical modules and test equipment. The complete Series of 10G XFP,SFP+,GPON,100G CFP and 40G QSFP+ modules,and AOC Cables and other low rate modules,which widely used in fixed telecommunication networks, large Cloud computing and datacenter, IDC ,storage Computing network ,Video transmission, integrating systems,which meet various application requirements.
No. of Employees: 500 Persons
Business Type: Manufacturer/OEM
Main Products
sfp module