Guangzhou Auro Beauty Equipment Co., Ltd.
20Products, 0News, 0Sell Leads
Products
Mini electric facial steamer vapozone beauty machine (2328A)New
Ozone facial steamer series
Inquire Now
Description
Deep cleaning facial steamer Au-2328A
Product features:
1. All detachable elements make you feel more convenient to replace it. Cool & warm tanks can be washed. It can kill bacteria and remove inflammation.
2. Cold water tank is separated from hot water tank, which has been improved much from traditional cold-hot double spraying. Thus cold spray and hot spray works respectively excellently through their own channel, not affecting each other.
3. Adopt imported parts, never attenuate. Don’t do any harm to atomization slice, titanium alloy atomization slice. Atomization time is up to 10000 hours.
4. Stainless steel heating pipe never rusts.
5. Adopt European water level detection mode----No water, automatically cut off electricity.
6. Sufficient cold spray; cold and hot spray can use at the same time to form warm spray.
7. Nice, elegant and easy to operation.
Main Technical Parameters:
Rated voltage
110/220V
Maximum power for hot spraying
450W
Maximum power for cool spraying
50W
Maximum power for warm spraying
500W
Maximum volume of hot tank
150ml
Hot spraying time
15 min
Maximum volume of cold tank
150ml
Atomization quantity
0~400ml
Procedure for installation and operation
1. Put the machine on the smooth table.
2. Place the spray pipe to the vapor’s exit.
3. Press the hot water cup upward and then screw it.
4. Fill water into the hot water cup from the hot-spraying water inlet until the water level gets close to the high limit for water filling. So it is with cool water tank.
5. Plug to power, press the switch to begin the operation.(Attention: The machine will utter alarm sound when you turn on hot spray switch if there’s no water or too much water in the hot cup.)
Attention for operation
1. Don’t place the machine upside down or tilt it when it is in operation. Don’t operate cold spraying or hot spraying when there is no water. Don’t use water to wash the machine. Change the water inside the cold water tank and the hot water tank and clean them frequently, and power plug must be unplugged before water changing and draining. Drain all the water out of the machine if it is not used for a long time.
2. In order to avoid danger, the water level must not exce4ed the hot wate4r cup’s high limit or water filling. Please don’t take down the spray pipe during the runtime.
3. Never pour the herbal medicine, essence and so on into the water tank directly. Or else it will damage the instrument.
4. Press the hot switch and cool switch for warm vapor.
Analysis of Common Failures
Vapor Steamer
Phenomenon
Source of trouble
Solution
Troubleshooting
for cool vapor
There is air flow
but no vapor at all.
Cool vapor doesn’t light up.
Add water to minimum water level, turn on cool switch.
Atomization slice is aging.
Replace atomization slice.
The water is too hard.
Change the water or drip minim vinegar.
Oil stain or soapsuds
float on water.
Clean the water tank, drip minim vinegar.
There is vapor
but no air flow at all.
Blower is damaged.
Change the blower.
The water level is too high.
Discharge some water.
The water level is too low.
Pour some more water.
Troubleshooting
for hot vaporization
There are sounds
but no heat.
The water is too pure.
Use tap water.
The water level is too high.
Discharge some water.
The water is too turbid.
Clean the unit and replace with clean water.
There is scale and oil dirt at the root of the heating tube.
Loose and take out the cup to clean it.(See the bottom of this instrument)
No heat no sounds
Hot vapor doesn’t light up.
Turn on the switch..
Too little time, water isn’t boiling.
Wait for several minutes until the water is boiling.
Heating tube is damaged.
Change the heating tube.
Specification:
Voltage:110V/220V
Power:450W
G.W.:2.5kg
Package: 27*16*26cm
Mini electric facial steamer vapozone beauty machine (2328A)
Product features:
1. All detachable elements make you feel more convenient to replace it. Cool & warm tanks can be washed. It can kill bacteria and remove inflammation.
2. Cold water tank is separated from hot water tank, which has been improved much from traditional cold-hot double spraying. Thus cold spray and hot spray works respectively excellently through their own channel, not affecting each other.
3. Adopt imported parts, never attenuate. Don’t do any harm to atomization slice, titanium alloy atomization slice. Atomization time is up to 10000 hours.
4. Stainless steel heating pipe never rusts.
5. Adopt European water level detection mode----No water, automatically cut off electricity.
6. Sufficient cold spray; cold and hot spray can use at the same time to form warm spray.
7. Nice, elegant and easy to operation.
Main Technical Parameters:
Rated voltage
110/220V
Maximum power for hot spraying
450W
Maximum power for cool spraying
50W
Maximum power for warm spraying
500W
Maximum volume of hot tank
150ml
Hot spraying time
15 min
Maximum volume of cold tank
150ml
Atomization quantity
0~400ml
Procedure for installation and operation
1. Put the machine on the smooth table.
2. Place the spray pipe to the vapor’s exit.
3. Press the hot water cup upward and then screw it.
4. Fill water into the hot water cup from the hot-spraying water inlet until the water level gets close to the high limit for water filling. So it is with cool water tank.
5. Plug to power, press the switch to begin the operation.(Attention: The machine will utter alarm sound when you turn on hot spray switch if there’s no water or too much water in the hot cup.)
Attention for operation
1. Don’t place the machine upside down or tilt it when it is in operation. Don’t operate cold spraying or hot spraying when there is no water. Don’t use water to wash the machine. Change the water inside the cold water tank and the hot water tank and clean them frequently, and power plug must be unplugged before water changing and draining. Drain all the water out of the machine if it is not used for a long time.
2. In order to avoid danger, the water level must not exce4ed the hot wate4r cup’s high limit or water filling. Please don’t take down the spray pipe during the runtime.
3. Never pour the herbal medicine, essence and so on into the water tank directly. Or else it will damage the instrument.
4. Press the hot switch and cool switch for warm vapor.
Analysis of Common Failures
Vapor Steamer
Phenomenon
Source of trouble
Solution
Troubleshooting
for cool vapor
There is air flow
but no vapor at all.
Cool vapor doesn’t light up.
Add water to minimum water level, turn on cool switch.
Atomization slice is aging.
Replace atomization slice.
The water is too hard.
Change the water or drip minim vinegar.
Oil stain or soapsuds
float on water.
Clean the water tank, drip minim vinegar.
There is vapor
but no air flow at all.
Blower is damaged.
Change the blower.
The water level is too high.
Discharge some water.
The water level is too low.
Pour some more water.
Troubleshooting
for hot vaporization
There are sounds
but no heat.
The water is too pure.
Use tap water.
The water level is too high.
Discharge some water.
The water is too turbid.
Clean the unit and replace with clean water.
There is scale and oil dirt at the root of the heating tube.
Loose and take out the cup to clean it.(See the bottom of this instrument)
No heat no sounds
Hot vapor doesn’t light up.
Turn on the switch..
Too little time, water isn’t boiling.
Wait for several minutes until the water is boiling.
Heating tube is damaged.
Change the heating tube.
Specification:
Voltage:110V/220V
Power:450W
G.W.:2.5kg
Package: 27*16*26cm
Mini electric facial steamer vapozone beauty machine (2328A)
Features
Warm up skin,accelerate blood circulation
Moisture skin,soften gease
Open up pores for deep cleanse
Supplement oxygen ions
Specification
Voltage:AC 110/220V 50-60Hz
Power:450W
G.W.:2.5KG
Package:29.5*21*17cm
Power:450W
G.W.:2.5KG
Package:29.5*21*17cm
Safety/Quality Approvals
CE
Country of Origin
China
Main Export Markets
USA, Europe
Payment Details
Payment Terms : T/T,Western Union,MoneyGramMinimum Order : 1 Units
Delivery Details
Lead Time : 3-5 DaysFOB Port : huangpuOthers : 1-3 days after receive your payment
About Us
AURO -- Profession, Honesty, Innovation
Guangzhou Auro Beauty Equipment Co., Ltd. is located in Guangzhou, china and is one of the enterprises which focusing on the research, design, production and sale. Our products are applied in the fields of beauty, salon, hair-dressing and health care. With advanced production technology, perfect equipment and scientific management concept, our company has been in the leading position in the industry. Our company has a number of engineers, technicians and beauty advisers. We have formed the whole system from research, production to sale. We always keep the pace with times and provide the latest functional and fashionable beauty and hair-dressing instruments.
We have successfully developed hundreds of types of beauty, hairdressing and health care instruments, with the brands of Aurola and Aurome. These products are very popular among domestic and overseas markets. We have gained a high reputation in the field. We will keep the spirits of "searching beauty and health for human; developing perfect products". We will be honored to invite you to join us.
.
Established Date: 2011/10/1
No. of Employees: 10 Persons
Business Type: Exporter
Main Products
IPL machine,microdermabrasion machine,no needle mesotherapy machine