This machine is designed to cope with precise requirements of thin films such as Copper foil, Al. foil…etc.
Rigid frame -- Both side panels are assembled with the base on heavy steel, assure tram and vibration free operation.
Driven system -- AC SERVER motor with tacho-generator, and transmit by timing belt, It includes functions
as soft start, soft stop, emergency stop. All controls are located on control panel in the front of machine.
Unwind tension control -- Equipped with powder brake and automatic tension controller to get the optimum
tension on unwind side at high speed.
Rewind tension control -- Equipped with auto tension control LOAD CELL and Air-Friction Shaft.
Web guide system --Edge position controller to guarantee the slitting margin very accurate in the range of ±0.1mm
Rewind arm -- Equipped with Air-Friction Shaft.
Knife System -- Equipped with GANG CUT and SHEAR CUT system, it was designed by cassette, so it
can be shifted easy.
Edge waste trimming -- By united axle rewind.
Easy maintenance -- Hinge-out electric for easy maintenance.
Special design of any width slitting is available.
Web: 1/3~1 OZ pure Cu or compound Film 20~180um
Unwind Width: 650mm
Unwind Diameter: Max. Φ500mm
Unwind Core I.D.: Φ76/152mm
Rewind Diameter: Max. Φ250mm
Rewind Core I.D.: Φ76mm
Slit Width: 250mm
Machine Speed: 50M/min
Running Speed: Depending on material quality and slitting width to be processed.