Products
IP54 Waterproof Pure Sine Wave 380V 3 Phase Inverter 200KW Dc To Ac Power SupplyNew
SDP-200KW
Inquire Now
Description
IP54 Waterproof Pure Sine Wave 380V 3 Phase Inverter with DC to AC Power Supply offered by us supports pure sine wave output. This product is equipped with in built MPPT solar charge controller(optional) for uninterrupted supply of solar power needed for smooth running of any solar system. All its parameters can be programmed easily to meet specific application requirement.IP54 Waterproof Pure Sine Wave 380V 3 Phase Inverter with DC to AC Power Supply has auto restarting function and it is suitable for off grid as well as for grid back up functions. This inverter also has LCD display arrangement with LED indicator based design for the convenience of operator.
Features
The core components are all imported, adopting the sixth generation IPM module from Mitsubishi, which has stable performance, long service life, strong protection functions and convenient replacement and maintenance.
Adopt the central processor DSP28335 chip from American TI Company, respond quickly and accurately, and provide stable and clean power for the load to provide protection.
The whole machine adopts modular design and plug-in design, which is convenient for maintenance and reduces the hidden cost of machine failure to repair.
According to the product configuration conditions, adjustment the system usage mode: DC(Battery/Solar) priority or AC mains bypass priority can be set.
Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converter’s usage, which reduced the cost of equipment investment, easy to connect wires and control.
The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy ±1%.
The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel.
Output AC Power is suitable for all types of electrical equipment, CNC machines, electric tools, motors, pump and air conditioner etc. It has higher efficiency and higher capability of driving load.
Humanized safety design, using isolation transformer design, input and output are completely electrically isolated, input and output are equipped with circuit breakers, which saving costs for the user and easy to installation, the electric parts are completely closed to prevent electric shock.
Wide input voltage can be set according to customer’s requirement. Input voltage range can be selected from 100-300V, 200-500V or 500-850V, suitable for solar system without backup batteries, it can save many cost and maximization use the solar system.
Using SVPWM space vector algorithms, high conversion efficiency, high instantaneous power and low losses conversion efficiency up to 94%.
Powerful data display function. LCD + LED display, can display input and output voltage, current, KWH, fault display, convenient for customers to quickly find faults and guide maintenance.
European CE (EMC, LVD, UL1741) and ISO9001 certificates.
Adopt the central processor DSP28335 chip from American TI Company, respond quickly and accurately, and provide stable and clean power for the load to provide protection.
The whole machine adopts modular design and plug-in design, which is convenient for maintenance and reduces the hidden cost of machine failure to repair.
According to the product configuration conditions, adjustment the system usage mode: DC(Battery/Solar) priority or AC mains bypass priority can be set.
Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converter’s usage, which reduced the cost of equipment investment, easy to connect wires and control.
The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy ±1%.
The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel.
Output AC Power is suitable for all types of electrical equipment, CNC machines, electric tools, motors, pump and air conditioner etc. It has higher efficiency and higher capability of driving load.
Humanized safety design, using isolation transformer design, input and output are completely electrically isolated, input and output are equipped with circuit breakers, which saving costs for the user and easy to installation, the electric parts are completely closed to prevent electric shock.
Wide input voltage can be set according to customer’s requirement. Input voltage range can be selected from 100-300V, 200-500V or 500-850V, suitable for solar system without backup batteries, it can save many cost and maximization use the solar system.
Using SVPWM space vector algorithms, high conversion efficiency, high instantaneous power and low losses conversion efficiency up to 94%.
Powerful data display function. LCD + LED display, can display input and output voltage, current, KWH, fault display, convenient for customers to quickly find faults and guide maintenance.
European CE (EMC, LVD, UL1741) and ISO9001 certificates.
Specification
Model SDP-200KW SDP-250KW
Isolation mode Low Frequency Transformer
DC Input
Rated voltage (Vdc) 480Vdc 540Vdc 540Vdc 600Vdc
Rated current (A) 417A 370A 463A 417A
Input voltage range (Vdc) 432~650V 486~750V 486~750V 540~850V
AC Output
Rated power (Kw) 200KW 250KW
Rated voltage 380V±3% 380V±3%
Number of phases 3 phase 4 wire 3 phase 4 wire
Rated current (A) 303A 379A
Rated output voltage range (V) 220/230/240/380/400/415/440/480VAC (optional)
Output frequency 50Hz or 60Hz ±0.05 (Can set)
Waveform Pure sine wave
Waveform distortion rate (THD) Linear load≤2%
Dynamic Response time (Load 0←→100%) 5%, ≤50ms
Power Factor (PF) 0.99
Inverter Efficiency >93%
Electrical insulation properties 2000Vac、1 Minute
Protection Function
Overload Ability 150%、10s
Protection Input reverse polarity, under voltage, overvoltage, output over-current, short circuit, overheating etc.
Display LCD+LED
Communication interface (optional) RS485 (A、B)
Method of working Working continuously
Cooling method Fan-cooled
Short-circuit protection No automatic recovery, need to restart the machine
Working Environment & Mechanical dimension
Degree of protection IP20 (indoor)
Working Altitude(m) ≤3000m
Working temperature (℃) -20~+50℃
Relative humidity (℃) 0~90%, No condensation
Noise ( 1 meter) ≤60dB
Unit size: (W x D x H) 1000×1150×1860mm
Reference weight (Kg) 1150Kg 1300Kg
Our company can adjust parameter configuration according to user’s requirement.
Isolation mode Low Frequency Transformer
DC Input
Rated voltage (Vdc) 480Vdc 540Vdc 540Vdc 600Vdc
Rated current (A) 417A 370A 463A 417A
Input voltage range (Vdc) 432~650V 486~750V 486~750V 540~850V
AC Output
Rated power (Kw) 200KW 250KW
Rated voltage 380V±3% 380V±3%
Number of phases 3 phase 4 wire 3 phase 4 wire
Rated current (A) 303A 379A
Rated output voltage range (V) 220/230/240/380/400/415/440/480VAC (optional)
Output frequency 50Hz or 60Hz ±0.05 (Can set)
Waveform Pure sine wave
Waveform distortion rate (THD) Linear load≤2%
Dynamic Response time (Load 0←→100%) 5%, ≤50ms
Power Factor (PF) 0.99
Inverter Efficiency >93%
Electrical insulation properties 2000Vac、1 Minute
Protection Function
Overload Ability 150%、10s
Protection Input reverse polarity, under voltage, overvoltage, output over-current, short circuit, overheating etc.
Display LCD+LED
Communication interface (optional) RS485 (A、B)
Method of working Working continuously
Cooling method Fan-cooled
Short-circuit protection No automatic recovery, need to restart the machine
Working Environment & Mechanical dimension
Degree of protection IP20 (indoor)
Working Altitude(m) ≤3000m
Working temperature (℃) -20~+50℃
Relative humidity (℃) 0~90%, No condensation
Noise ( 1 meter) ≤60dB
Unit size: (W x D x H) 1000×1150×1860mm
Reference weight (Kg) 1150Kg 1300Kg
Our company can adjust parameter configuration according to user’s requirement.
Safety/Quality Approvals
CE, ISO9001, CSA
Country of Origin
China
Main Export Markets
wordwide
Payment Details
Payment Terms : Payment in AdvanceMinimum Order : 1Others : T/T Paypal Western Union
Delivery Details
Lead Time : 25 DaysFOB Port : Ningbo, ShanghaiOthers : SANDI Standard export honeycomb carton packing with pallet
About Us
Zhejiang Sandi Electric Co., Ltd is an international photovoltaic enterprise located in Wenzhou, known as the "capital of China's electrical appliances." With over 15 years of experience in research, development, manufacturing, and service in the new energy and electrical sectors, Sandi has established itself as a leader in the industry.
Our products are widely used in various applications, including solar and wind energy systems, industrial automation control, civilian energy solutions, electric power, medical treatment, aviation, automatic control systems, trains, ships, fire power, military systems, and national heavy engineering projects.
Main products: Off grid pure sine wave inverter, Energy storage lithium battery with BMS pack, solar charge controller, solar pump inverter, single phase to three phase converter, AC/DC Battery Charger products.
Sandi is recognized by a diverse customer base for its extensive product range, high quality, and commitment to customer service. The company rigorously controls product quality, striving for perfection and viewing quality as the lifeline of the business. We continuously improve our quality management system and have obtained ISO9001, CE (EMC & LVD, EN62109, EN61000), and SAA certifications, all approved by international standards. We consistently introduce advanced international production and testing equipment to ensure product quality and timely delivery.
At Sandi, we prioritize a people-oriented approach, with a foundation of integrity and exceptional service to ensure customers feel secure using our products, earning us their praise.
Sandi is committed to being a technology leader, maintaining long-term, collaborative research partnerships with universities, and incorporating international advanced technologies. We have established a stringent quality control system to uphold our high standards.
Our work objectives are centered on “unremitting exploration, endeavor and innovation, honesty and dedication, perfection and practicality,” while our quality guidelines emphasize “criterion management, intensive manufacturing, quality first, and wholehearted service.” We seek excellence and value innovation! We look forward to working together to achieve brilliance.
Established Date: 2012/8/21
No. of Employees: 98 Persons
Business Type: Manufacturer/OEM
Main Products
Pure Sine Wave Inverter, Energy Storage Lithium Battery, Solar Inverter, Marine/Vehicle Inverter, Solar Charge Controller, Off-Grid Inverter, Power Inverter, PV Combiner Box, AC/DC Battery Charger, Single Phase To Three Phase Converter