Olomouc International Co., Ltd.
403Products, 3News, 2Sell Leads
Product Category
Home
About Us
Products
News
Sell Leads
Contact Us
Products
15~170psi Pair TPMS LED Auto Smart Sensor Tire Pressure Monitor Valve Stem Cap
5025T
Inquire Now
Description
Auto-Learning Smart Sensor: Don't need to specify pressure rating.
1. Product Performed at Pressure Range: 15 PSI~170 PSI / 1.0 BAR~11.0 BAR
2. Product Performance Accuracy Range: ± 2 PSI . ( 0.15BAR ) when pressure range is at 15~70PSI (1.0Bar~4.9Bar)
Product Performance Accuracy Range: ± 3 PSI . ( 0.20 BAR ) when pressure range is at 71~170PSI (4.9Bar~11.2Bar)
3. When Pressure is below 8% of standard value, “RED” LED flashing will be on (LED-will be on for 1-second, stop 1 second recycling reminder).
4. An “Warning” (Green & Red LED flashing) indication will be provided when battery is in low-battery consumption stage. (LED will be on for 1 second. Then, stop for 3 seconds (When it is no pressure, it is still able to detect low-battery)
When installed firmly on the valve stem, wait for 8~12 seconds until seeing Green LED flashing one time to ensure the installation and product is in good condition for performance.
Product Dimension: 2.25 x 2.0 cm, 10 gms (Aluminum), 12gms (Brass)
Battery type: CR1632 (pc/product)
Battery life: 12~18 months at normal pressure condition
Installation Note :
There is an insulator inside of each cap, please turn the top (PC cap) to remove the paper to begin the product performance.
Balancing Wheel is always recommended after installation of the product.
Warning:
1.Ensure Caps are securely tightened before driving and during long trips; loose caps will deflate tires and endanger driving conditions.
2.Caps do not represent as a regular tool for tire pressure. Dead battery may prevent sending alarm.
3.Battery can be replaceable.
1. Product Performed at Pressure Range: 15 PSI~170 PSI / 1.0 BAR~11.0 BAR
2. Product Performance Accuracy Range: ± 2 PSI . ( 0.15BAR ) when pressure range is at 15~70PSI (1.0Bar~4.9Bar)
Product Performance Accuracy Range: ± 3 PSI . ( 0.20 BAR ) when pressure range is at 71~170PSI (4.9Bar~11.2Bar)
3. When Pressure is below 8% of standard value, “RED” LED flashing will be on (LED-will be on for 1-second, stop 1 second recycling reminder).
4. An “Warning” (Green & Red LED flashing) indication will be provided when battery is in low-battery consumption stage. (LED will be on for 1 second. Then, stop for 3 seconds (When it is no pressure, it is still able to detect low-battery)
When installed firmly on the valve stem, wait for 8~12 seconds until seeing Green LED flashing one time to ensure the installation and product is in good condition for performance.
Product Dimension: 2.25 x 2.0 cm, 10 gms (Aluminum), 12gms (Brass)
Battery type: CR1632 (pc/product)
Battery life: 12~18 months at normal pressure condition
Installation Note :
There is an insulator inside of each cap, please turn the top (PC cap) to remove the paper to begin the product performance.
Balancing Wheel is always recommended after installation of the product.
Warning:
1.Ensure Caps are securely tightened before driving and during long trips; loose caps will deflate tires and endanger driving conditions.
2.Caps do not represent as a regular tool for tire pressure. Dead battery may prevent sending alarm.
3.Battery can be replaceable.
Specification
Surface Finish: Copper Alloy
1 year manufacturer's warranty
1 year manufacturer's warranty
Other 1
FAQ:
Q: How do you set up the pressure rating?
A: It detects initial tire pressure automatically, you don't need to set up the pressure rating.
Q: Is battery replaceable?
A: Yes, battery can be replaceable.
Q. How to install it ?
A. All you to do is screw them on instead of your regular black valve caps.
When installing, pay attention to the placement of the valve cap.
Avoid contact with the tire fender & brake pads or any possible existing parts (especially on Harley-Davidson motorcycles and scooters).
Q. The instructions say "there is an insulator inside of each cap". Why I could see no insulator (paper)?
A. To save paper, there have been no insulator inside of cap. We keep the cap not assembling completely to instead of insulator.
Q: How do you set up the pressure rating?
A: It detects initial tire pressure automatically, you don't need to set up the pressure rating.
Q: Is battery replaceable?
A: Yes, battery can be replaceable.
Q. How to install it ?
A. All you to do is screw them on instead of your regular black valve caps.
When installing, pay attention to the placement of the valve cap.
Avoid contact with the tire fender & brake pads or any possible existing parts (especially on Harley-Davidson motorcycles and scooters).
Q. The instructions say "there is an insulator inside of each cap". Why I could see no insulator (paper)?
A. To save paper, there have been no insulator inside of cap. We keep the cap not assembling completely to instead of insulator.
About Us
Welcome to Olomouc International Co., Ltd., a distinguished bicycle manufacturer and bicycle parts exporter with a rich legacy dating back to 1992. Operating seamlessly in both Taiwan and China, we take pride in our commitment to excellence.
In the heart of Taiwan, Olomouc International specializes in the assembly of tailor-made alloy/carbon wheel sets and the meticulous curation of a diverse range of bicycle components. Meanwhile, in China, our cutting-edge facilities are dedicated to the precision production of alloy/carbon bicycle frames and forks, crafted to exacting standards that align with your unique requirements.
What truly distinguishes Olomouc International is our advanced Computational Fluid Dynamics (CFD) simulation service. This groundbreaking technology not only accelerates development timelines but also optimizes aerodynamic performance, enhances visual aesthetics, and provides a comprehensive visualization of the product's flow field—a strategic advantage in your marketing efforts. Our CFD solvers undergo rigorous verification and validation, assuring you of data accuracy that meets the highest industry standards.
Partner with Olomouc International Co., Ltd. for an unparalleled fusion of precision engineering, innovative solutions, and a steadfast commitment to surpassing your expectations. Experience cycling at its finest with a company dedicated to pushing the boundaries of what's possible.
Business Type: Manufacturer/OEM
Main Products
Wheel Set, Bicycle Frame, Alloy Frame, Fork, Bicycle Fork, Carbon Frame, Carbon Fork, Bicycles, Mountain Bike, Road Racing Bike, Children's Bikes, Folding Bikes, Recumbent Bikes, Unicycles, Tricycle Stroller, Baby Stroller, Transmission Parts, Steering
Contact Details
Related Products
Bicycle Storage Mount
Inquire Now
QR BICYCLE STAND
Inquire Now
DISPLAY STNAD
Inquire Now
STEEL FOLD BASKET
Inquire Now
REARVIEW MIRROR
Inquire Now
SPORTS LED CLIP
Inquire Now
NM01 Cell phone holder
Inquire Now
Road Bike Rear Derailleur Cage
Inquire Now
Bike traveler
Inquire Now
Other buyers also viewed these products
CHAIN(narrow/wide)
Inquire Now
All Categories