Changzhou Bell Data Communication Equipment CO., LTD
15Products, 0News, 0Sell Leads
Products
48 cores Wall Mount Fiber Optic Distribution Box
48 cores Wall Mount Fiber Optic Distribution Box
Inquire Now
Description
48 cores Wall Mount Fiber Optic Distribution Box
Contact:Violet.E-mail: violet(at)veecom(dot)com(dot)cn.
Overview:
Fiber Management Tray also called ODF Distribution Box, Integrated Splicing and Distribution ODF.
It is mainly used for cable inlet, grounding and fixing and the splicing between the terminal end and pigtail. Users can select unit or ring flange amount according to their practical needs
Features:
Material: cold rolled steel。
The body with electrostatic spraying surface, light structure and good-looking appearance。
19" or 23'' standard installation, adjustable in forward and backward directions.
The panels can be clamped with 12/24/48 cores FC/SC/ST adaptors, which bevel the face side with 30 degrees,That not only ensures the curvature radius of fiber but also protects the eyes from highlight.
Suitable for being installed in different kinds of racks or cabinets.
Side door and upside door could be opened to arrange the fiber Optical cables can be lead in/out from rightward or leftward.
The Fiber Fusing Distribution Board of the unit box is double side structure, fully adopting the face and back side of the board. Suitable for ribbon or non-ribbon optical fiber cable.
Uses and properties:
The wiring connection device used in connecting optical cables and optical communication installations.
Suitable for the protective connection between cables and pigtails.
Used for both single core and ribbon optical fiber cable.
Closure structure with excellent sealing performance.
Adopting the splicing and distribution module for easy operations.
Special fiber routing designs to ensure that the bending radii are over 40mm.
Main Technical Indexes:
Environmental temperature:-25℃~+55℃.
Relative humidity:<85%(When the temperature is below 30℃).
Atmospheric pressure:70~106KPa.
Insulation resistance:≥2?04MΩ/500VDC.
Voltage resistance strength:non-puncture, no arc-over under 3KVDC/1min.
Insertion loss: PC>40dB, UPC>50dB, APC>60dB.
Connection life span: >1,000 times.
.
Contact:Violet.E-mail: violet(at)veecom(dot)com(dot)cn.
Overview:
Fiber Management Tray also called ODF Distribution Box, Integrated Splicing and Distribution ODF.
It is mainly used for cable inlet, grounding and fixing and the splicing between the terminal end and pigtail. Users can select unit or ring flange amount according to their practical needs
Features:
Material: cold rolled steel。
The body with electrostatic spraying surface, light structure and good-looking appearance。
19" or 23'' standard installation, adjustable in forward and backward directions.
The panels can be clamped with 12/24/48 cores FC/SC/ST adaptors, which bevel the face side with 30 degrees,That not only ensures the curvature radius of fiber but also protects the eyes from highlight.
Suitable for being installed in different kinds of racks or cabinets.
Side door and upside door could be opened to arrange the fiber Optical cables can be lead in/out from rightward or leftward.
The Fiber Fusing Distribution Board of the unit box is double side structure, fully adopting the face and back side of the board. Suitable for ribbon or non-ribbon optical fiber cable.
Uses and properties:
The wiring connection device used in connecting optical cables and optical communication installations.
Suitable for the protective connection between cables and pigtails.
Used for both single core and ribbon optical fiber cable.
Closure structure with excellent sealing performance.
Adopting the splicing and distribution module for easy operations.
Special fiber routing designs to ensure that the bending radii are over 40mm.
Main Technical Indexes:
Environmental temperature:-25℃~+55℃.
Relative humidity:<85%(When the temperature is below 30℃).
Atmospheric pressure:70~106KPa.
Insulation resistance:≥2?04MΩ/500VDC.
Voltage resistance strength:non-puncture, no arc-over under 3KVDC/1min.
Insertion loss: PC>40dB, UPC>50dB, APC>60dB.
Connection life span: >1,000 times.
.
Features
Multi-core indoor tight tube optical cable.
My email is violet(at)veecom(dot)com(dot)cn.
Small diameter, high packing density; small bending semi-diameter; good flexibility.
The application of superior materials and optimized technology ensures the excellent property against high and low temperature.
It is the fundamental unit for indoor soft cable.
Applicable to the connection of wires inside the components of meters,which helps save the limited space.
My email is violet(at)veecom(dot)com(dot)cn.
Small diameter, high packing density; small bending semi-diameter; good flexibility.
The application of superior materials and optimized technology ensures the excellent property against high and low temperature.
It is the fundamental unit for indoor soft cable.
Applicable to the connection of wires inside the components of meters,which helps save the limited space.
Specification
Features:
Material: cold rolled steel。
The body with electrostatic spraying surface, light structure and good-looking appearance。
19" or 23'' standard installation, adjustable in forward and backward directions.
The panels can be clamped with 12/24/48 cores FC/SC/ST adaptors, which bevel the face side with 30 degrees,That not only ensures the curvature radius of fiber but also protects the eyes from highlight.
Suitable for being installed in different kinds of racks or cabinets.
Side door and upside door could be opened to arrange the fiber Optical cables can be lead in/out from rightward or leftward.
The Fiber Fusing Distribution Board of the unit box is double side structure, fully adopting the face and back side of the board. Suitable for ribbon or non-ribbon optical fiber cable.
Material: cold rolled steel。
The body with electrostatic spraying surface, light structure and good-looking appearance。
19" or 23'' standard installation, adjustable in forward and backward directions.
The panels can be clamped with 12/24/48 cores FC/SC/ST adaptors, which bevel the face side with 30 degrees,That not only ensures the curvature radius of fiber but also protects the eyes from highlight.
Suitable for being installed in different kinds of racks or cabinets.
Side door and upside door could be opened to arrange the fiber Optical cables can be lead in/out from rightward or leftward.
The Fiber Fusing Distribution Board of the unit box is double side structure, fully adopting the face and back side of the board. Suitable for ribbon or non-ribbon optical fiber cable.
Safety/Quality Approvals
48 cores Wall Mount Fiber Optic Distribution Box
Contact:Violet.E-mail: violet(at)veecom(dot)com(dot)cn.
.
Contact:Violet.E-mail: violet(at)veecom(dot)com(dot)cn.
.
Other 1
48 cores Wall Mount Fiber Optic Distribution Box
Contact:Violet.E-mail: violet(at)veecom(dot)com(dot)cn.
Contact:Violet.E-mail: violet(at)veecom(dot)com(dot)cn.
Country of Origin
China
Main Export Markets
Worldwide
Payment Details
Payment Terms : T/T in advance
Delivery Details
Lead Time : 5 DaysFOB Port : Shanghai
About Us
My email is violet(at)veecom(dot)com(dot)cn.
Bell Data Communication Equipment CO., LTD is a leader in the production of network access, telecommunication and connectivity products . They are widely used all over the world and have proved to be the most versatile, user-friendly and cost-effective. The high quality and stability of our products achieved us ISO 9001 Quality Authentication Certificate.
Established Date: 1998/9/10
No. of Employees: 20-30 Persons
Business Type: Manufacturer/OEM
Main Products
fiber optic patch cord,fiber optic connector,fiber optic pigtail,plc aplitter,optic termination box,fiber optic adapter,fiber optic attenuator,fiber optic coupler,plc fiber optic CWDM,fiber ODF,fiber optic splicer closure,fiber optic cross conect cabinet,