Products
High-acceleration shock tester
DP-1200-18
Inquire Now
Description
The precise-type high-acceleration shock tester can provide all half-sine short wave specification specified in JESD22-B110. To meet them, merely change different shock rubber-pad on shock seat. The wave is complete with high repeatability, able to provide user accurate test result.
Conform to different test specs such as JESD22-B110 and IEC spec.
High repeatability on consecutive shock; acceleration +/- 10%; run time +/- 15%; speed deviation +/- 10%.
Table’s four corner-points uniformity P160mm +/- 10%.
Can add spring system to reach the requirement of extra high acceleration specification.
Using high-efficiency vibration-absorbing seat pad can block out possible floor resonance and protect the factory structure.
Easy in operation; no complicate training course required.
Module shock rubber-pads are applied per different standards independently. And the rubber-pad lifetime can be prolonged.
Conform to different test specs such as JESD22-B110 and IEC spec.
High repeatability on consecutive shock; acceleration +/- 10%; run time +/- 15%; speed deviation +/- 10%.
Table’s four corner-points uniformity P160mm +/- 10%.
Can add spring system to reach the requirement of extra high acceleration specification.
Using high-efficiency vibration-absorbing seat pad can block out possible floor resonance and protect the factory structure.
Easy in operation; no complicate training course required.
Module shock rubber-pads are applied per different standards independently. And the rubber-pad lifetime can be prolonged.
Features
While a non-repetitive mechanical shock environment is encountered, find out the mechanical weakness and decay of specific functions. Basically simulate the consequence of random shock possibly encountered during transporting or operation process. While running a shock test, normally fix the specimen on fixture or testing table; wave model frequently selected per specification is the half-sine wave.
Table Size (mm2) | 180x180 |
Table Weight (kgw) | 25 |
Peak load (kgw) | 20 |
Shortest Acting Time(mS ) | 0.3 |
Peak acceleration (g ) | 2900 |
Maximum Acting Displacement (mm) | 900 |
LxWxH (cm) | 101x50x270 |
Required Voltage Supply | 220V, 3Φ, 16A |
Required Air Pressure Supply(kg/cm2) | 6 |
Shock Specification | JESD22-B110, IEC |
Specification
Shock Acceleration(gn) | Staying Time (mS) | Speed-change Rate (△V cm/s) |
---|---|---|
2900 | 0.3 | 543 |
2000 | 0.4 | 505 |
1500 | 0.5 | 467 |
900 |
0.7 | 386 |
500 | 1 | 316 |
340 | 1.2 | 254 |
200 | 1.5 | 187 |
100 | 2 | 122 |
About Us
KING DESIGN is the expert in the field of Vibration, shock, and the environment test Equipment; since 1983 King Design has established the technique knowledge in the field and won many enterprises' confidence and support. The brief features of King Design's service provided are listed as follows: Equipment Sales Service, CNLA Laboratory Service, Vibration Diagnostic and Structure improvement consultant, Environment Stress Screen (ESS).
Business Type: None
Main Products
Vibration, Vibration Test System, Vibration Simulator, Shock Tester, Drop Tester, E.S.S, Environmental Stress Screening, LED Tester, Humidity Tester, Test Equipment, Test Machine, Air Bumping, Free-fall, Shock Amplifier, Environment Test Equipment