2024/4/21 ~ 2024/5/5

Description

The solution of solar PV cell test mainly bases on the test requirements of cell & module, developing various testers and testing equipments. We develop the test systems for all manufacturers conforming to different international standards from solar cells to terminal system products; helping them to ensure their products quality meeting international standard.



1. Destruction System Hardware:

(1) Test rack system: support, shielding cover, crane & fixed wall.

(2) Hit bag: FRP bag; 45kg of No.7.5 lead pills; hook, sleeve and hoisting ring.

(3) Attachment: electronic scale, stopwatch, digital caliper



2. Technical Index:

(1) Test rack dimension is 370cm x 240cm x 350cm; sufficient to install the 260cm x 220cm x 200cm test module and run test. Accept customized order.

(2) Test rack: made by a20 I-beam; coated by paint.

(3) Rack earthing: need 12mmx8 round holes to install anchor bolts.

(4) Test module fixing rack is made by two 2500mm 80x80mm standard aluminum beam in transverse direction; fixed on the I-beam of test surface by specific right-angle fixer; about 300mm above floor. The workable vertical space is about 2300mm; there are 2x2600mm aluminum beams installed in longitudinal direction and fixed by specific right-angle fixer on the transverse aluminum beam; the width is adjustable per test requirement.

(5) The impactor diameter at the bottom is about 200mm, tapered to the opening of about 35mm in diameter. The impactor is a catabash bag with lead pills enclosed; the total height is 330mm.



More information and spec, please visit our website : http://www.kdi.tw/