An Jarl Enterprise Co., LtdTaiwan

84Products, 1News, 0Sell Leads

Products

Description :
SEED SOWING DEVICE
Appling
This seed sowing device is suitable for sowing crops that require to thin plants such as spinach, radish, carrot, Chinese cabbage, cabbage and sunflower for ornamental cut flowers, etc. It dispenses seeds via a seeding disc. In addition to regular seeding discs with dispensing holes, there are spare seeding discs without dispensing hole for self-processing to suit a variety of seed sizes and spacing. Due to the straight line sowing, the row spacing is regular, which is conducive to field management operations such as fertilization and weeding.
Characteristic
1. There is a convenient square link buckle in front of the device for easy attachment to tractors, cultivators or manual propulsion equipment.
2. Easy to add or reduce seeding rows. Quickly assemble and disassemble.
3. Lightweight for easy working, improve work efficiency.
4. Eliminate the parts of not necessary, concise structure of device make cost reasonable.
5. Save seeding work and reduce seed costs. Reduce the thinning operation.
6. It is very easy to operate with this device and can be operated without special training.
Structure of seed sowing device
The seed sowing device is mainly constructed with a square link buckle portion, a seeding and landing wheel portion, and a seed drop portion.
1. The square link buckle is in front of the seed sowing device. It is used to be locked to a square connecting rod. The square connecting rod is connected and fixed to the pulling equipment, such as tractors, cultivators or even manpower device.
2. The seeding and landing wheel portion includes a seed box, a seeding case, a seeding disc, a barrier brush and a landing wheel.
a. The seed box is placed above the seed sowing device to load the seeds. It includes two parts: the seed box body and the lid.
b. The seeding case is under the seed box, includes the seeding case body and the cover. To be used to place a seeding wheel.
c. The seeding disc is located in the center of the seeding case. At outer edge has some concave seed dispensing holes. There are three seeding discs with regular holes for radish, leeks and spinach. In addition, we have spare seeding disc without seed dispensing hole. This spare seeding disc is for self-processing concave holes to meet the needs of various vegetable seeds. Seeding disc is changeable for different sizes of seeds with different drop distance.
d. The barrier brush is located at the upper going edge of the seeding case to remove excess seeds.
e. The center of the seeding case has a drive shaft that runs through the seeding case. A section of shaft out of seeding case is used to install an engineering plastic landing wheel.
3. The seed drop portion contains a ditching duct and a soil covering plate. The ditching duct can be adjusted according to the depth of seeding. The soil covering plate is used to cover the soil on the seeds that fall on the ground.
How the seed sowing device working
The seed sowing device pulled by power, then the landing wheel turn forward. Seeds are down from the seed box, to the seeding disc with certain volume in certain distance, finally the seeds down into the soil via a ditch duct below. The delivery of the seeds utilizes its own weight.
When falling into the seed dispensing hole of the seeding disc, the seeding wheel is turned forward in a counterclockwise direction. The inside of the seeding case has a concave guide groove above the outer edge. The seeds to be broadcast will enter here. Before entering, due to the blocking of the going edge brush, the extra seeds in the seeding disc hole will be blocked. The seed dispensing holes set the distance and volume to drop the seeds.
The rotation of the seeding disc is driven by the coaxial landing wheel. When in contact with the soil, landing wheel drives the drive shaft and rotates the seed disc.
The seeds are introduced into the ditching duct and then fall into the ditch, which is then covered with soil. In this way, ditching, sowing, and covering soil have been completed the same time.
Device operation
1. The soil in the sowing block should be loosed first. After deciding to plant the types of vegetables, select the seeding disc depend on the volume and distance of dispensing holes. After selecting the appropriate seeding disc, open the cover of seeding case and place the appropriate seeding disc in the seeding case. Then adjust the gap between brush and seeding disc, and adjust the sowing depth of ditching duct.
2. Place the seeds in the seed box.
3. For seeding seeds, if you need to cover the soil, the ditching duct and soil covering plate below the seeding case must be installed. You can adjust the ditching duct and soil covering plate as the depth needed. If the seeds do not need to be covered, the ditching duct and soil covering plate can be removed.
4. Before start the seeding operation, rotate the landing wheel goes forward for a half turn firstly. After the seed is dropped to the ditching duct, the seeding operation can be started. In this way, the initial 30 cm missing can be avoided.
5. During operation, pay attention to whether the landing wheel rotates normally to avoid the Intermittent seeding.

Features :
1. There is a convenient square link buckle in front of the device for easy attachment to tractors, cultivators or manual propulsion equipment.
2. Easy to add or reduce seeding rows. Quickly assemble and disassemble.
3. Lightweight for easy working, improve work efficiency.
4. Eliminate the parts of not necessary, concise structure of device make cost reasonable.
5. Save seeding work and reduce seed costs. Reduce the thinning operation.
6. It is very easy to operate with this device and can be operated without special training.
The device can set with different handles for one line or linked together for some lines seeding pushed by manpower. It can also attached after tractor for several lines seeding.
Safety/Quality Approvals :
ISO9001:2015
Other 1 :
An Jarl enterprise co., ltd. is a manufacturer of various items for farm irrigation & lots of kinds of farm implements for over 40 years
from TAIWAN.

Our product series including sprinkler hose (rain pipe, rain tape, micro spray tube) irrigation system, mulch film, accessories for agriculture, horticulture, greenhouse, net house, irrigation sprinklers, micro irrigation sprinklers, field irrigation implements, cooling & moisture system, flat garden hose, seep soaker hose, flexible pipe, seedling trays, insecticide fog sprayer, fog nozzles, agriculture net, tunnel small greenhouse, Venturi fertilizer injector, T fitting & other fittings for irrigation systems … etc.

Back in 1985 we reorganized our company as a limited corporation. Meanwhile we got the certification approval by ISO for more than 15 years, which just upgraded to ISO 90001:2015 at year of 2017.

Our factory is located in Kaohsiung, a southern harbor city of Taiwan. And we are now expert in manufacture and supply for most farming accessories, equipment & agricultural irrigation system.

We kept researching and growing through all these years, besides products of farm irrigation system and farm mulch, we developed new series of simple use apparatus i.e. accessories to used in flat roof net houses and greenhouse system, that helps farmers and bring giant benefit of economic income and yield rate and great saves of labor for them, That makes our brand “DEAR DEER”welcomed in many country / regions.

We also designed a product of innovation called "hanging sprinkler hose" which can be hung in and outdoors to spray for a misty micro irrigation like small rain, that won't hurt the fragile seedling, and vegetable's leaf, and also provide farmers and agricultural machine have free space to work under it. Hanging sprinkler hose has different pore patterns for downward spray, sideward spray or upward spray etc. It may hung on the roof to spray down or hung at wall to make one side spray inside greenhouse.
.
Besides producing our own products, we also please acting as a lots of ODM & OBM factory for customized products. Actually, we manufacture many products for some big brands in Taiwan and other countries.

We are developing new products like irrigation control system, spray drip hose, breathable mulch film. We always keep our innovation and creation to create new items every year, to listen to what customers need and keep improving is no compromising to us.

We produce new items every year, listen to what customers need and fulfill their requirement / develop products what they need. We do the best service to our customers, hope we can be a main supplier and one stop shopping for most of agriculture & horticulture needs in tool and accessories and a reliable supporter for farm works all over the world.

Our goal is to become one of world leaders to fulfill supply all aspect of what our customer need, not only agriculture but also garden accessories, in the future.

Send Message (Your message will be sent directly)

Please enter only English message between 20 and 900 characters

Contact Information

Please enter First and Last Name


More Exposure,
More Buyers Match,
Unlimited Number of Products.
Apply now !
Wonpro Co., Ltd.