U-CAN DYNATEX INC.
Mooney viscometer
2024/4/20 ~ 2024/5/4
Description
Features:
a. The model UM-2050 consists of one main testing unit and one subunit of control and data analysis equipped with one IBM compatible PC,colour monitor,CD-Rom,hardisk,and one printer.
b. Manufacturing Standard:In accordance with ASTM D1646, JIS K6300
c. Temperature:1. working Range: From room temperature to 200oC2. Accuracy: Within±0.3oC3. Display Resolution: 0.1oC
d. Moving Die Frequency: 2Rpm.
e. Mooney Range: 100M and 200M
f. Mooney Unit: M(1M=0.735 1bf-in)
g. Maximum Load: 250M
h. Mooney Display Resolution: 0.01
i. Rotor Type: L size and S size.
j. Electricity Supply: AC220+10%, 50/60±3Hz, 7AM, single phase; or discretionary at user needs.
k. Pneumatic Pressure: 7kg/cm2 or 103Psi(Air-compressor is to be user own equipment)
l. Apparatus Measurements:
Net Main Unit: 66(L)x57(W)x124(H) cm
Sub Unit: 70(L)x67(W)x130(H) cm
Packing 85(L)x79(W)x151(H) cm
76(L)x73(W)x136(H) cm
m. Weights:
Net Main Unit: 220 Kgs Sub Unit: 45 Kgs
Gross Main Unit: 260 Kgs Sub Unit: 100 Kgs
n. One L and S size rotors, 5Ps of fuse, 10Ps of rubber seal, 2Ps of 2Kg-calibrator, one copper pry bar, One copper brush, 500Ps of printer paper sheet.
U-Can is a certified ISO 9001: 2000 and CE manufacturer. It was formally named Eekoner Ind. Co. which was founded in Taipei Taiwan in 1986,
Similar Sell Lead
Fatigue Tester
Features: A. Test Waveform: provide sine waveform, triangular waveform, and square waveform. B. Provide peak value of displacement(x0) C. Provide peak value of load (Po) D. Provide test sequenc ...
2024/4/24 ~ 2024/5/8
Carbon Black Dispersion
Features a. Pixel and dispersion analysis: Based on method A and B of ASTM D-2663 to carry out the calculation and analysis about particle numbers, diameter, distribution, and area etc. b. Philips ...
2024/4/24 ~ 2024/5/8
Tensile Tester
Features a. In terms of load capacity, our tensile tester is classified to four kinds: Model Capacity UT-3200 over 2 tons UT-2060 below 2 tons UT-2080 below 500 kgf UT-3100 below ...
2024/4/20 ~ 2024/5/4
Rheometer
Features: a. Can provide curves and values of torque and scorch/cure time, loss angle, tangent delta, CRI, ML, MH etc. b. Can provide plots and percentage of compounding homogeneity variation. c. ...
2024/4/20 ~ 2024/5/4