Trade Asia Homepage
Nan Jung Electronic Co., Ltd.

>> Company profile
>> View more products
Item Number.:
Dynamic Balancer
Product Name:
Space/Model NV-30 NV-100 NV-300 NV-1T NV-3T
Weight range of workpiece
( )Maximum weight when
same weight on each support
Workpiece dia
Belt drive
Joint drive
Distance between bearings 700mm 1000mm 1500mm 2200mm 2200mm
Journal dia 40mm 80mm 130mm 180mm 180mm
Vector scope measuring range
Balancing speed R.P.M INVERT CONTROL
Balancing accuracy Depending on nature of workpiece (Flexibility, liability to
permanent deformation) and accuracy of bearing surface
Sensitivity ISO G0.4
Drive motor 0.75kw 1.5kw 3.5kw 7.5kw 7.5kw
  1. Cathode-ray tube (CRT) is used in it that the unbalance vector will be clearly indicated at the flourescent screen.
  2. IC memory device will indicate the unbalance vector when the workpiece rotation stops.
  3. Broad balancing speeds, 200-20000RPM.
  4. The tachometer also will indicate the balancing speed at the same time.
  5. Sensitive automatic filter homing willnot be affected a little by the speed changing.
  6. Ultra precision. The vibration displacement can reach below ISO G0.4.
  7. In accordance with theworkpieces, select the proper driving method, belt driving,joint driving, or self driving.
  8. When you use the calculating circuit, the compensation circuit will offset the workpiece unbalance. Standard workpiece is not required.
  9. On site balancing do not need calculating.
  10. All the circuits are highly sensitive integrated circuit(IC). Assuring longer life and greater reliability.

Safety/Quality Approvals:
For the balance and correction of the rotating part of motors, generators, ventilators, blowers, engines, pumps, work machines, farming machines, paper machines, textile machines, construction machines, food machines, motorcycles, automobiles, steaming ships, airplanes, etc. before and after the assembling.
Other 2:

Best driving above the workoiece
Put on the terminal fastener
Balancing after assembling
Joint driving
Best driving under the workoiece

The high quality and muti-purpose vector scope type Dynamic Balancer will completely satisfy the requirement in the following situations:
1. Mass production.
2. Producing small quantities but many different items.
3. High rotating speed balancing.
4. High precision ISO G0.4.
5. Special workpiece balancing.
6. Balancing after assembling.
7. Balancing on site.

Send Message    (Your message will be sent directly)  
* Required information     
* Subject :
* Message :
 Please enter only English message between 20 and 900 characters
Contact Information
* Contact Person :
Please enter First and Last Name
* Email :
* Company Name :
* Country/Region :
* Industry :
Web Site :
* Please enter your check code :

More Exposure,
More Buyers Match,
Unlimited Number of Products.
Apply now !
Wonpro Co., Ltd.

Copyright (c) 2020 TradeAsia. All Rights Reserved.