* ITE 60950-1, 62368-1 & Medical 60601-1 approvals.
* High Power density, 280W in 5" x 3.28" footprint.
* Medical applications Protection: Means of Patient Protection ( MOPP).
* Altitude during operation: ITE up to 5000m ,Medical Below 3000m.
* Main output and Standby output Power ON LED indicators.
* 3 years warranty.
Dimension : L127 ×W83.2 ×H39.5mm ( 5" x 3.28" x 1.56")
Weight : 0.50 kgs. ( 1.11lbs. )
Input range : 90 - 264VAC (Refer to derating curve).
Input current (rms) : 3.5A @115VAC; 2A @230VAC max.
Efficiency : > 91% typical @full load, 230VAC.
leakage current < 100uA @264VAC.
Maximum output power : 280Watts forced air, 200Watts convection cooling.
Hold-up time : > 10ms typical @full load, 115VAC.
Short circuit protection : Auto-recovery.
Over load protection : 105% to 150% maximum rating, Auto-recovery.
Over voltage protection : Latching type. AC Recycle.
5Vsb meet ErP 0.5W @ No load.
Remote control ( Inhibit ) function.
Operating temperature : -20°C to +70°C (Refer to derating curve).
Storage temperature: -20°C to +85°C.
Humidity: Non-condensing 0% to 90%.
MTBF : > 250,000 hours @full load and 25°C ambient temperature per Telcordia(Bellcore).
UL60601-1 3.1rd Edition
EN60601-1 3.1rd Edition
IEC EN60601-1 3.1rd Edition
CB IEC 60950-1
CB IEC 62368-1
EN55011 Class B
EN55032 Class B
FCC Part 15 Class B
FCC Part 18 Class B
DC OUTPUT & FEATURES
( Note 1.)
air total power
1. Output connector options: Z=T ( Terminal block type, pitch 8.25mm) or Z=M ( Mini-fit type, pitch 4.2mm) or Z=C ( Connector type, pitch=3.96mm ).
2. All models are equiped with 5Vsb & 12V fan outputs.
3. All models have total power 200W Max. convection or 280W Max. forced air cooling.
4. Ripple and noise are measured at oscilloscope 20MHz bandwidth by a 47uF electrolytic capacitor and a 0.1uF ceramic capacitor in parallel at output connector