This site uses cookies to provide you with a better experience. For information on our Privacy and Cookie Policy, please visit this page. By continuing to use the site or closing this banner, you are agreeing to our terms of use. Close
40/65Watts Single Output U channel/Enclosed/Din-Rail
Description:
* Less than 150mW no-load power consumption and high efficiency.
* Meet LPS except +5V model, +24V model meet Class 2 Output.
* Altitude during operation up to 5000m.
* Main output Power ON LED indicators.
* Black anodized chassis coating available.
* 3 years warranty.
Maximum output power ( Po ) : 65 Watts convection cooling
Hold-up time : > 10ms typical @full load, 115VAC
Short circuit protection : Auto-recovery
Over load protection : 105% to 160% maximum rating, Auto-recovery
Over voltage protection : Latching type. AC Recycle
Safety standards
UL/c-UL UL60950-1
TUV EN60950-1
CB IEC 60950-1
EMC standards
FCC Class B
CISPR22 Class B
EN55032 Class B
CE
Environmental
Operating temperature :-10 to +70°C (Derate linearly 2.5% per °C from 51 to 70°C,
(Derate linearly 1.0% per °C from 0 to -10°C)
Storage temperature: -20°C to +85°C
Operating Humidity: 10% to 95%, non-condensing
Storage Humidity: 0% to 95%, non-condensing
MTBF : > 100,000 hours @full load and 25°C ambient temperature per Telcordia (Bellcore TR-332).
RoHS compliant
U-channel type
Dimension : L120.7 × W63.5 × H38.1 mm ( 4.75" x 2.50" x 1.50" )Weight : 0.25 kgs. (0.55 lbs. )
Enclosed type
Dimension : L120.7 × W63.5 × H38.1 mm ( 4.75" x 2.50" x 1.50" )Weight : 0.27 kgs. (0.60 lbs. )
Din-Rail type
Dimension : L120.7 × W63.5 × H47.2 mm ( 4.75" x 2.50" x 1.86") Weight : 0.29 kgs. (0.64 lbs. )
DC OUTPUT & FEATURES
Model No
Output Voltage(V1)
Minimun Load
Max. Load
Output
Max.
Watts
Output
Regulation
Ripple & Noise (Vp-p)
Efficiency
Level
LPS
PW040E-1Y050Z
+5V
0A
8.00A
40W
±3%
100mV
VI
●
PW-065E-1Y120Z
+12V
0A
8A
65W
±3%
120mV
VI
●
PW-065E-1Y150Z
+15V
0A
4.34A
65W
±3%
150mV
VI
●
PW-065E-1Y180Z
+18V
0A
3.62A
65W
±3%
180mV
VI
●
PW-065E-1Y240Z
+24V
0A
2.71A
65W
±3%
240mV
VI
●
PW-065E-1Y280Z
+28V
0A
2.33A
65W
±3%
280mV
VI
●
PW-065E-1Y480Z
+48V
0A
1.36A
65W
±2%
280mV
VI
●
PW-065E-1Y540Z
+54V
0A
1.21A
65W
±2%
280mV
VI
●
Note:
1. Model options: Z = U U-channel Z = E Enclosed Z = D Din-Rail
2. Input/Output connector : Terminal block type, pitch 9.5mm
3. Ripple and noise are measured at oscilloscope 20MHz bandwidth by a 10uF electrolytic capacitor and a 0.1uF ceramic capacitor in parallel at output connector.
4. The output voltage is set by manufacturer.
5. The switching frequency of this series is set 65KHz at full load.
(Your message will be sent directly)
