This site uses cookies to provide you with a better experience. For information on our Privacy and Cookie Policy, please visit this page. By continuing to use the site or closing this banner, you are agreeing to our terms of use. Close
ITE AC/DC Power Adapter AD-A12 Series 250Watts DOE level VI & EU Erp tier 2 Efficiency Compliant
Description:
*ITE Approvals ( Class I )
*3-prong IEC320-C14, Class I (I/O Switch Option)
*Altitude during operation: ITEl up to 5000m.
*≦ 0.15W No Load Input Power
*Touch current less than 100uA
*3 year warranty
Features:
*Dimension : L 200×W 90×H45 mm ( 7.874"x3.543"x1.77" )
*Weight : 1.3 kgs. ( 2.87 lbs. )
Input current (rms) : 2.5A @115VAC; 1.3A @230VAC max.
Efficiency : > 89% (Average) 25 %, 50 %, 75 % and 100 % of full load @ 115/230VAC
Touch current < 100uA @264VAC
Maximum output power (Po) : 250 Watts convection cooling
Hold-up time : > 10ms typical @full load, 115VAC
Short circuit protection : Auto-recovery
Over load protection : 105% to 160% maximum power, Auto-recovery
Over voltage protection : Auto-recovery
Safety standards
UL/c-UL UL60950-1
TUV EN60950-1
CB IEC 60950-1
EMC standards
EN55032 Class B
EN55024 Class B
FCC Part 15 Class B
CE.
Environmental
Operating temperature : -20 to +60°C (Refer to "Derating Curve")
Cooling:Convection-cooling
Storage temperature : -20°C to +85°C
Humidity: Non-condensing 0% ~ 95%.
MTBF : > 200,000 hours @full load and 25°C ambient temperature based on Bellcore TR-332
DC OUTPUT & FEATURES
Model
Output Rating
Po
O/P regulation
Ripple & Noise
(Vp-p)
DOE Efficiency
EU ErP
PW-250A-1Y120P1IZ
+12V
20.83A
250W
±5%
240mV
VI
Tier 2
PW-250A-1Y190P1IZ
+19V
13.157A
250W
±5%
300mV
VI
Tier 2
PW-250A-1Y240P1IZ
+24V
10.416A
250W
±5%
300mV
VI
Tier 2
PW-250A-1Y280P1IZ
+28V
8.928A
250W
±5%
300mV
VI
Tier 2
PW-250A-1Y360P1IZ
+36V
6.94A
250W
±5%
300mV
VI
Tier 2
PW-250A-1Y480P1IZ
+48V
5.208A
250W
±5%
300mV
VI
Tier 2
PW-250A-1Y540P1IZ
+54V
4.629A
250W
±5%
250mV
VI
Tier 2
Note:
1. Ripple and noise are measured at oscilloscope 20MHz bandwidth by a 47uF electrolytic capacitor and a
0.1uF ceramic capacitor in parallel at output connector.
2. AC INLET : IEC 320-C14(3PIN)
3. Z = S to denote With I/O Switch, Z = X to denote Without I/O Switch.
(Your message will be sent directly)
