*Both ITE & Medical Approvals.
*High Power density, 360W in 6" x 4" footprint.
*Medical applications Protection: Means of Patient Protection ( MOPP).
*Altitude during operation: ITE up to 5000m ,Medical Below 3000m.
*Meet Medical BF rated.
*Main output and Standby output Power ON LED indicators.
*3 years warranty.
Input range : 90 - 264VAC (Refer to derating curve).
Input current (rms) : 5A @115VAC; 2.5A @230VAC max.
Efficiency : > 90% typical @full load, 230VAC.
Earth leakage current < 100uA @264VAC.
Maximum power : 360 Watts with 15CFM forced air cooling (U-channel type)
Maximum output power : 360Watts forced air, 250Watts convection cooling.
SHold-up time : > 10ms typical @full load, 115VAC.
Short circuit protection : Auto-recovery.
Over power protection : 105% to 150% maximum rating, Auto-recovery.
Over voltage protection : Latching type. AC Recycle.
5Vsb meet ErP 0.5W @ No load.
Remote control ( Inhibit ) function.
Operating temperature : 0 to +70°C (Refer to derating curve).
Storage temperature: -20°C to +85°C.
Humidity: Non-condensing 0% to 90%.
MTBF : > 250,000 hours @full load and 25°C ambient temperature per Telcordia(Bellcore TR-332).
UL60601-1 3.1rd Edition
EN60601-1 3.1rd Edition
IEC EN60601-1 3.1rd Edition
CB IEC 60950-1
CB IEC 62368-1
EN 55011 Class B
EN55032 Class B
FCC Part 15 Class B
FCC Part 18 Class B
Dimension : L152.4 × W101.6 × H30.0 mm ( 6" x 4" x 1.18" )
Weight : 0.48 kgs. (1.06 lbs. )
Output Voltage (V1)
Maximum Load (V1)
Output Regulation (V1)
Ripple Noise (V1)
Standby supply (V2)
FAN output (V3)
Convection total power
20CFM Forced air total power
18 CFM Forced Air
1. Output connector options: Z=T ( Terminal block type, pitch 8.25mm): Suitable for all voltages PW-IM360B-1Y240Z PW-IM360B-1Y280Z PW-IM360B-1Y480Z PW-IM360B-1Y540Z Z=C ( Connector type, pitch=3.96mm ): Suitable for 24V up 2. All models are equiped with 5Vsb & 12V fan outputs.
3. All models have total power 250W Max. convection or 360W Max. forced air cooling.
4. Ripple and noise are measured at oscilloscope 20MHz bandwidth by a 10uF electrolytic capacitor and a 0.1uF ceramic capacitor in parallel at output connector. POWER WIN TECHNOLOGY CORP