*Both Medical 60601-1 3.1rd Edition MOPP and ITE approved
*Compact, High Power density, 40W/65W in 2" x 3" footprint
*Meet DOE level VI 88% & ErP Tier 1 requirements.(Except +5V mode 86%)
*No load power consumption < 0.21W@230VAC (Except +5V mode ,< 0.1W@230VAC max)
*Ultra low Earth leakage current < 189uA @264VAC
*2 year warranty
Maximum output power (Po) : 65 Watts convection cooling((Except +5V mode ,40 Watts )
Hold-up time : > 10ms typical @ load 75% , 115VAC
Short circuit protection : Auto-recovery
Over load protection : 105% to 170% maximum rating, Auto-recovery
Over voltage protection : Shutdown and latch off, AC recycle
Operating temperature : -20 to +70°C (Derate linearly 2.5% per °C from 41 to 70°C)
Storage temperature: -20°C to +85°C
Humidity: Non-condensing 0% to 90%
MTBF : > 100,000 hours @full load and 25°C ambient temperature
60601-1 3.1rd Edition
CSA-C22.2 No.60601-1 3.1rd Edition
EN60601-1 3.1rd Edition
IEC EN60601-1 3.1rd Edition
FCC Part 18 Class B
EN55011 Class B
EN55032 Class B
CISPR22 Class B
FCC Part 15 Class B
Ripple & Noise
1. At 25°C including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings.
2. Ripple and noise are measured at oscilloscope 20MHz bandwidth by a 100uF electrolytic capacitor and a
0.1uF ceramic capacitor in parallel at output connector.
3. DC OUTPUT & FEATURES Operating temperature is 0 to +40°C.
4. -20 to 0°C output characteristics Output regulation are ±10%.