Features
24 ADSL2+ Ports
Supports ANSI T1.413 Issue 2, ITU G.992.5, G.992.3, G.992.1 (G.dmt), ITU-T G.992.2 (G.lite)
Multimode (automatic modulation detection)
Supports packets transmit and receive statistics report.
Provides optimal rate/reach performance
Higher rates by limiting reach (up to 24.0 Mbps)
Longer reach by reducing rate (distance up to 6.5 Km)
Bandwidth Management control on each port at 32kbps interval.
Build in splitter.
Supports ANSI T1.413 Issue 2, ITU G.992.5, G.992.3, G.992.1 (G.dmt), ITU-T G.992.2 (G.lite)
Multimode (automatic modulation detection)
Supports packets transmit and receive statistics report.
Provides optimal rate/reach performance
Higher rates by limiting reach (up to 24.0 Mbps)
Longer reach by reducing rate (distance up to 6.5 Km)
Bandwidth Management control on each port at 32kbps interval.
Build in splitter.
Specification
10/100 BASE-TX ports for uplink and downlink, with auto-negotiating and automatic MDI/MDIX (Flat and cross cable Auto cross-over)
Support Mixed voice-data networks
Special power saving mode for inactive ports
Each port can be individually enabled or disabled with management card installed
TFTP
BOOTP Client, Boot Server
IEEE 802.1d Spanning Tree
IEEE 802.1 P/Q
Support IGMP Snooping
Support priority queue scheduling
Support WF2Q+ scheduling
Support multiple PVC QoS configuration
ATM Support
ATM Signaling UNI 3.1 & 4.0
PPP (RFC 2364) over ATM
RFC 1483
RFC 1577 (IP over ATM)
AAL0, AAL2, AAL5
ATM Service Class: UBR/VBR/CBR
32 VCs
Support Mixed voice-data networks
Special power saving mode for inactive ports
Each port can be individually enabled or disabled with management card installed
TFTP
BOOTP Client, Boot Server
IEEE 802.1d Spanning Tree
IEEE 802.1 P/Q
Support IGMP Snooping
Support priority queue scheduling
Support WF2Q+ scheduling
Support multiple PVC QoS configuration
ATM Support
ATM Signaling UNI 3.1 & 4.0
PPP (RFC 2364) over ATM
RFC 1483
RFC 1577 (IP over ATM)
AAL0, AAL2, AAL5
ATM Service Class: UBR/VBR/CBR
32 VCs
Safety/Quality Approvals
Interface
2RJ45 for Uplink
2 RJ21 for Phone / Line Connection
1 DB9 male (Null Modem) for Local Management
Console Management
WEB Management
CLI & Telnet Management
SNMP Management
Operation Parameters
Temperature 0 to 50蚓 (Standard)
Humidity 5% to 95% non-condensing
Altitude -200ft.to +15,000ft
Reliability MTBF 140,000 hrs minimum
Dimensions
323(L) x 440(W) x 44.2(H)mm
Input Power
85-265V AC
-36~72V DC
2RJ45 for Uplink
2 RJ21 for Phone / Line Connection
1 DB9 male (Null Modem) for Local Management
Console Management
WEB Management
CLI & Telnet Management
SNMP Management
Operation Parameters
Temperature 0 to 50蚓 (Standard)
Humidity 5% to 95% non-condensing
Altitude -200ft.to +15,000ft
Reliability MTBF 140,000 hrs minimum
Dimensions
323(L) x 440(W) x 44.2(H)mm
Input Power
85-265V AC
-36~72V DC
Other 1
The ADSL2+ Line Card interface module provides Maximum Downstream Rate up to 24 Mbps and Maximum Reach Distance over 6.5 Km. It is most suitable for local ISPs to use existing copper twisted pair telephone lines to provide high speed Internet access.
This 24-port interface module is ITU G.ADSL2+ (G.992.5), G.992.3, G.span Standard ADSL II 992.2, 992.1, hot swappable and features the LED indicators in front of the Line Card panel. Link status LED indicates each connection status. When LED turns green means the line connection is valid and operational. Our company ADSL2 / 2+ Line Card is also backwards compatible with early version of ADSL and it is enhanced version of the ADSL2 improvement technology with the cross-talk free features.
This 24-port interface module is ITU G.ADSL2+ (G.992.5), G.992.3, G.span Standard ADSL II 992.2, 992.1, hot swappable and features the LED indicators in front of the Line Card panel. Link status LED indicates each connection status. When LED turns green means the line connection is valid and operational. Our company ADSL2 / 2+ Line Card is also backwards compatible with early version of ADSL and it is enhanced version of the ADSL2 improvement technology with the cross-talk free features.
About Us
Sino-Telecom was founded in 2006 upon a dream to build a leading provider of complete broadband access solution for internet service providers as well as business users. Today, Sino-Telecom is a fast growing high technology startup company in China, the company currently has 200 more employees, and distributors in 30 countries reaching over 100 regional markets.
It product portfolio including xDSL, PON, optical communication system, communication test meters and network management. Sino-Telecom has a leading R&D team consists of 70 engineers, most of them has independent software and hardware product design experience in xDSL hardware, xDSL software, optical communication system, EPON/GPON test equipment. And the headcounts is still growing with company development.
It product portfolio including xDSL, PON, optical communication system, communication test meters and network management. Sino-Telecom has a leading R&D team consists of 70 engineers, most of them has independent software and hardware product design experience in xDSL hardware, xDSL software, optical communication system, EPON/GPON test equipment. And the headcounts is still growing with company development.
Business Type: Manufacturer/OEM
Main Products
DSL,ADSL,ADSL2+,VDSL,VDSL2,DSLAM,Modem,PON,EPON,GPON,Power,Meter,OLT,ONU
Contact Details
View similar products inModem
I want to purchase