Features
Waterproof Medical DeskTop Adapter
The FWM150 series of AC/DC switching power supplies are for 132-150 watts of continuous output power. They are enclosed in a 94V-0 rated polycarbonate case with an IEC320/C14, C6, C8 or C18 inlet to mate with interchangeable cord for world-wide use. All models meet EN55011 class B emission limits, and are designed for medical applications.Safety/Quality Approvals
- No load power consumption less than 0.15W
- Meet Energy Star EPS2.0 /ErP EC No 278/2009 (Lot 7)
- Meet EU CoC EPS V5 Tier 2
- With PFC circuit
- Low profile at 28mm
- Operating altitude up to 5000 meters
- Wide input range 80 to 264 VAC
- Class II model meet IEC 60601-1-11 and IP54
- Optional output connectors
- 100% burn-in
- Overvoltage protection
- Overcurrent protection
- Compliant with RoHS requirements
Other 1
Input voltage | 80-264 VAC |
Power derating | Derate linearly from 100% at 90 VAC to 90% at 85Vac and 80% at 80 VAC |
Input frequency | 47-63 Hz |
Input current | 1.8 A (rms) for 115 VAC ; 0.9 A (rms) for 230 VAC |
Earth leakage current | 220 μA max. @ 264 VAC, 63 Hz |
Touch current | 100 μA max. @ 264 VAC, 63 Hz |
Ripple and noise | 1% peak to peak maximum |
Over voltage protection | Provided and set at 112-140% of its nominal output voltage, latching by recycle input to reset |
Short circuit protection | Automatic recovery |
Over temperature protection | Latching by recycle input to reset |
Temperature coefficient | ±0.04% /℃ maximum |
Transient response | Maximum excursion of 4% or better on all models, recovering to 1% of final value within 500 us after a 25% step load change |
Operating temperature | -20℃ to +60℃ |
Atmospheric pressure | 540 hPa to 1060 hPa |
Storage temperature | -40℃ to +85℃ |
Relative humidity | 5% to 95% non-condensing |
Derating | Derate from 100% at +40℃ linearly to 50% at +60℃ |
Ingress protection | IP54 |
Switching frequency | 50-130 KHz |
Power factor | 0.98 Typical at 115 VAC |
Efficiency | 89% min. at full load |
Hold-up time | 20 ms minimum at 100 VAC |
Line regulation | ±0.5% maximum at full load |
Inrush current | 100 A @ 115 VAC or 200 A @ 230 VAC, at 25℃ cold start |
Withstand voltage | 4000 VAC from input to output (2 MOPP) ; 1500 VAC from input to ground (1 MOPP) ; 500 VAC from output to ground (For class II models, 4000VAC from input to output) |
MTBF | 100,000 hours at full load at 25℃ambient , calculated per MIL-HDBK-217F EMC Performance |
EN55011 | Class B conducted, class B radiated |
EN61000-3-2 | Harmonic distortion, class A and D |
EN61000-3-3 | Line flicker |
EN60601-1-2 | |
EN61000-4-2 | ESD, ±15 KV air and ±8 KV contact |
EN61000-4-3 | Radiated immunity, 9-28 V/m |
EN61000-4-4 | Fast transient/burst, ±2 KV |
EN61000-4-5 | Surge, ±1 KV diff., ±2 KV com. |
EN61000-4-6 | Conducted immunity, 10 Vrms |
EN61000-4-8 | Magnetic field immunity, 30 A/m |
EN61000-4-11 | Voltage dip immunity, 30% reduction for 500 ms (criteria A @ 230VAC, criteria B @ 100VAC), 60% reduction for 100 ms (criteria A @ 230VAC, criteria B @ 100VAC) and >95% reduction for 20 ms |
Model
Model No. | I/P Vol. | O/P Vol. | O/P Current | O/P Watts (max.) | DoE 6 | CoC 5 |
FWM150-S120-x | 80~264 VAC | 12.0VDC | 11.00A | 132W | VI | Tier 2 |
FWM150-S150-x | 80~264 VAC | 15.0VDC | 9.00A | 135W | VI | Tier 2 |
FWM150-S180-x | 80~264 VAC | 18.0VDC | 8.34A | 150W | VI | Tier 2 |
FWM150-S190-x | 80~264 VAC | 19.0VDC | 7.90A | 150W | VI | Tier 2 |
FWM150-S200-x | 80~264 VAC | 20.0VDC | 7.50A | 150W | VI | Tier 2 |
FWM150-S240-x | 80~264 VAC | 24.0VDC | 6.25A | 150W | VI | Tier 2 |
FWM150-S270-x | 80~264 VAC | 27.0VDC | 5.56A | 150W | VI | Tier 2 |
FWM150-S300-x | 80~264 VAC | 30.0VDC | 5.00A | 150W | VI | Tier 2 |
FWM150-S360-x | 80~264 VAC | 36.0VDC | 4.17A | 150W | VI | Tier 2 |
FWM150-S480-x | 80~264 VAC | 48.0VDC | 3.13A | 150W | VI | Tier 2 |
Ordering Information:
- Note : x for AC Inlet Type. It can be 4, 5, 6, or 8
4 = IEC C14 ; 5 = IEC C18 ; 6 = IEC C6 ; 8 = IEC C8
About Us
Welcome to FranMar International Inc., a distinguished manufacturer specializing in cutting-edge switching power supplies. Our extensive product range includes AC/DC Switching Power Supplies such as Desktop Adapters, Wall-Mount Adapters, Enclosed Power Supplies, Open Frame Powers, and U-Channel Powers. Additionally, we excel in crafting top-of-the-line Medical Power Supplies, DinRail Power Supplies, LED Drivers, and I.T.E Power Supplies. At FranMar, we pride ourselves on delivering high-quality, reliable solutions that meet the diverse needs of our global clientele. Our commitment to innovation and excellence has positioned us as a trusted partner in the industry. Whether you are in search of advanced power solutions for medical applications, industrial use, or LED technology, FranMar International Inc. stands ready to exceed your expectations. Join hands with us to experience unparalleled craftsmanship, exceptional performance, and a seamless integration of technology in our comprehensive power supply solutions. Elevate your business with FranMar - where excellence meets innovation.
Business Type: None
Main Products
AC/DC Switching Power Supply,Desktop Adapter, WallMount Adapter, Enclosed Power, Open Frame Power, U-Channel Power, Medical Power Supply, DinRail Power Supply , LED Driver and LED Power & I.T.E Power Supply.
Contact Details
View similar products inDesktop
I want to purchase