Features
Introduction:
AC 800M can be defined as a hardware platform consisting of individual hardware units. AC 800M hardware platform can be programmed to perform multiple functions, depending on the specific unit configuration and operating system selected. The hardware units which form the AC 800M Controller are:
??Processor units (including base plates)
??Communication interfaces for different protocols (including base plates)
??Power supply units, providing various power output levels
??Battery back-up unit
??For High Integrity systems control applications with AC 800M HI, special module SM810/SM811, is needed Once configured, the AC 800M hardware platform effectively becomes the AC 800M Controller. Equipped with the specified Control Software, the AC 800M Controller can be used for all kinds of process and industrial automation applications. With Control Software, the controller can act either as a stand alone process controller or as a controller, performing local control tasks, in a control network consisting of many interconnected computers. The AC 800M Controller is delivered without firmware. To provide the controller with Control Software, it will first be necessary to load the firmware and create the application separately by using the Control Builder interface.
The processor unit used for the AC 800M HI Controller is physically identical to other AC 800M controllers, simplifying service and spares support and providing flexibility during the project build phase. The HI functionality is extended by the addition of a SM810/SM811 and the SIL certified software license only. This enables non-critical control schemes to upgraded to SIL certified schemes by the addition of a plug-in SM810/SM811, plus selection of the appropriate license.
AC 800M can be defined as a hardware platform consisting of individual hardware units. AC 800M hardware platform can be programmed to perform multiple functions, depending on the specific unit configuration and operating system selected. The hardware units which form the AC 800M Controller are:
??Processor units (including base plates)
??Communication interfaces for different protocols (including base plates)
??Power supply units, providing various power output levels
??Battery back-up unit
??For High Integrity systems control applications with AC 800M HI, special module SM810/SM811, is needed Once configured, the AC 800M hardware platform effectively becomes the AC 800M Controller. Equipped with the specified Control Software, the AC 800M Controller can be used for all kinds of process and industrial automation applications. With Control Software, the controller can act either as a stand alone process controller or as a controller, performing local control tasks, in a control network consisting of many interconnected computers. The AC 800M Controller is delivered without firmware. To provide the controller with Control Software, it will first be necessary to load the firmware and create the application separately by using the Control Builder interface.
The processor unit used for the AC 800M HI Controller is physically identical to other AC 800M controllers, simplifying service and spares support and providing flexibility during the project build phase. The HI functionality is extended by the addition of a SM810/SM811 and the SIL certified software license only. This enables non-critical control schemes to upgraded to SIL certified schemes by the addition of a plug-in SM810/SM811, plus selection of the appropriate license.
Specification
Features:
The major features of the AC 800M are:
??High performance and large application memory.
??Extensive availability.
??CPU redundancy (PM861/PM864/PM865/PM866,PM891).
??AC 800M High Safety Integrity Level 2 certified using PM865/SM810/SM811.
??AC 800M High Safety Integrity Level 3 certified using PM865/SM811.
??Built-in redundant Ethernet channels.
??Built-in RS-232C channels.
??Sectioned CEX-Bus using a pair of BC810.
??Quick and simple fault-finding with the aid of LEDs on each unit / channel.
??Built-in battery back-up of memory (except for PM891).
??External battery back-up.
??Use of industry standard power supply voltage - 24V d.c.
??Easy mounting on standard DIN rail.
??IP20 Class protection without the requirement for enclosures.
??Incorporation of a wide variety of communication possibilities.
??Hardware based on standards for optimum communication connectivity (Ethernet, PROFIBUS DP).
??Support for PROFIBUS DP fieldbus.
??Support for FOUNDATION Fieldbus.
??Support for Advant Fieldbus 100.
??Support for Modbus TCP.
??Support for Field Device Tool (FDT) and Device Type Manager (DTM) concept for tool routing of HART instruments.
??Support for connection to INSUM via Gateway (Ethernet/LON).
??Support for IEC 61850.
??Support for PROFINET IO.
??Support for EtherNet/IP.
??Support for connection to S100 I/O.
??Support for connection to Satt I/O.
??Support for TRIO/Genius.
??Support for Genius remote I/O discrete, analog and high-speed counter blocks.
??Support for ABB Drives via PROFIBUS, ModuleBus and DriveBus.
??Support for connection to MasterBus 300.
??Full EMC certification.
??Selected units UL certified (UL508 as open equipment, and for hazardous locations according to UL60079-15 (Class 1 Zone 2))
All of the ABB Automation Part we sold. Sach as AC800M, AC800F, PP800 Panels, ABB ACS800 ACS550 ACS510, Contact us get a best pirce Now!
The major features of the AC 800M are:
??High performance and large application memory.
??Extensive availability.
??CPU redundancy (PM861/PM864/PM865/PM866,PM891).
??AC 800M High Safety Integrity Level 2 certified using PM865/SM810/SM811.
??AC 800M High Safety Integrity Level 3 certified using PM865/SM811.
??Built-in redundant Ethernet channels.
??Built-in RS-232C channels.
??Sectioned CEX-Bus using a pair of BC810.
??Quick and simple fault-finding with the aid of LEDs on each unit / channel.
??Built-in battery back-up of memory (except for PM891).
??External battery back-up.
??Use of industry standard power supply voltage - 24V d.c.
??Easy mounting on standard DIN rail.
??IP20 Class protection without the requirement for enclosures.
??Incorporation of a wide variety of communication possibilities.
??Hardware based on standards for optimum communication connectivity (Ethernet, PROFIBUS DP).
??Support for PROFIBUS DP fieldbus.
??Support for FOUNDATION Fieldbus.
??Support for Advant Fieldbus 100.
??Support for Modbus TCP.
??Support for Field Device Tool (FDT) and Device Type Manager (DTM) concept for tool routing of HART instruments.
??Support for connection to INSUM via Gateway (Ethernet/LON).
??Support for IEC 61850.
??Support for PROFINET IO.
??Support for EtherNet/IP.
??Support for connection to S100 I/O.
??Support for connection to Satt I/O.
??Support for TRIO/Genius.
??Support for Genius remote I/O discrete, analog and high-speed counter blocks.
??Support for ABB Drives via PROFIBUS, ModuleBus and DriveBus.
??Support for connection to MasterBus 300.
??Full EMC certification.
??Selected units UL certified (UL508 as open equipment, and for hazardous locations according to UL60079-15 (Class 1 Zone 2))
All of the ABB Automation Part we sold. Sach as AC800M, AC800F, PP800 Panels, ABB ACS800 ACS550 ACS510, Contact us get a best pirce Now!
Other 1
Product Benefits:
Some of the benefits of the AC 800M Controller are:
??Flexibility, the AC 800M Controller can be ordered as individual units which may be mounted in accordance with the customers own requirements.
??Extremely small footprint. ??Simple DIN rail attachment / detachment procedures, using the unique slide & lock mechanism.
??Modularity, allowing for step-by-step expansion. You only pay for what you require at the present time.
??Reliability and simple fault diagnosis procedures.
??Controller redundancy for higher availability (CPU, CEX-Bus, communication interfaces, S800 I/O).
??Built-in redundant Ethernet Communication ports.
??Built-in RS-232C communication ports.
??Low power consumption, thus no external fans required
. ??Flexible process connection, using either local I/O or standard fieldbuses.
??S800 I/O redundancy.
??Supports S800 I/O High Integrity (with PM865 only).
Some of the benefits of the AC 800M Controller are:
??Flexibility, the AC 800M Controller can be ordered as individual units which may be mounted in accordance with the customers own requirements.
??Extremely small footprint. ??Simple DIN rail attachment / detachment procedures, using the unique slide & lock mechanism.
??Modularity, allowing for step-by-step expansion. You only pay for what you require at the present time.
??Reliability and simple fault diagnosis procedures.
??Controller redundancy for higher availability (CPU, CEX-Bus, communication interfaces, S800 I/O).
??Built-in redundant Ethernet Communication ports.
??Built-in RS-232C communication ports.
??Low power consumption, thus no external fans required
. ??Flexible process connection, using either local I/O or standard fieldbuses.
??S800 I/O redundancy.
??Supports S800 I/O High Integrity (with PM865 only).
Country of Origin
France
Payment Details
Payment Terms : TTMinimum Order : 1Others : paypal
Delivery Details
Lead Time : 7 DaysFOB Port : shenzhen/hkOthers : Factory sealed packing
About Us
We focus on industrial automation and process instrument over 20 years
Business Type: Distributor
Main Products
AUTOMATION PROCESS INSTRUMENT
Contact Details
View similar products inWireless Networking Equipment
I want to purchase