We are professional Agricultural Machine Manufacturer in Taiwan, providing Jet Rice Polisher, Cereal Whitening Machine and Paddy Cleaner.
Features:
MODEL: NL- 15.25 ONE BREAK SYSTEM, A SPECIAL DESIGN FOR INDONESIA. SUPPORTED WITH THREE BEARINGS ON THE MAIN SHAFT.
The most important consideration in the economics of rice milling is the recovery and broken rice percentage. TAKA YAMA JeT POLISHER has been throughly tested and consistently proven to be the best rice milling machine of its kind. An increase in recovery and decrease in broken rice is guaranteed over whatever type of polisher you may have. The development of this JET POLISHER has been due to two important factors. The need of machine to give the largest yield of whole rice in view of the paramount importance of this staple commodity to the Asian people. The second factor stems from the excellence of the engineers at TAKA YAMA AGRICULTURE MACHINERY COMPANY. They have been instrumental in the development of many superb TAKA YAMA MACHINES
THE SPECIAL FEATURES OF TAKA YAMA "TRIPLE BEARINGS SUPPORTED" JET RICE POLISHER.
1.
Constant air injection into the polishing chamber during the whole polishing process guarantees the total elimination of bran and maintains the rice down at low temperature avoilding possible breakage.
2.
The main shaft is supported with three bearings, so the machine will operate more stable which decrease breakage of the polished rice and increase milling yield.
3.
15% of paddy grains among the brown rice can be also hulled in the polisher by one break operation; there therefore, the possibility that the paddy may appear with white rice is completely eliminated and the cleaning chamber will seperate husks from the pure white rice.
4.
High yield of pure, whole polished rice is assured because the rice meets the polisher surface without any pressure applied, so breakage is negligible.
5.
The polishing degree is adjustable as required by adding or retracting the resisting weight on the outlet plate by means of the balance weights.
6.
Durability of parts subject to wearing is extremely high. The milling chamber screen has been heat treated and the roll is made of exceptionally hardened steel.
7.
The inner frame rotate during operation so that it will not be blocked by wet bran.
Specification:
TAKA YAMA RICE POLISHER
MODEL
POWER REQUIRED
CAPACITY/HOUR
R.P.M.
HEIGHT
LENGH
WIDTH
NET WEIGHT
NL-12
7HP~9HP
700~800 kgs
800~850
700m/m
1150m/m
350m/m
200 kgs
NL-15
10HP~13 HP
1000~1200 kgs
700~750
820m/m
1200m/m
380m/m
260 kgs
NL-25
15HP~20HP
1600~2000 kgs
700~750
980m/m
1300m/m
450m/m
260 kgs
STANDARD SPARE PARTS :
1.Screen.......................1 set 2.Pressure Plate............1 set 3.Inner Cylinder..............1 pc. 4. Milling Roller..............1 pc. 5. Screwed Iron Roller....1 pc.
6.Inner Frame...............1 pc. 7.Bolt...........................1 pc. 8.Pinion........................1 set 9.Tools.........................1 set 10.Instruction Manual.....1 pc.
(Your message will be sent directly) 
