|
Programmable Low Power Life Tester--Specifications
(PLPL- 200mA- 400- CP- SD)
|
| Exterior dimension |
480 * 360 * 500 cm (W*H*D)(including projected parts) |
| Standard Channel |
A/B Port each 10 channel/module/40w (max 400channel/set) |
| Maximum control Module |
10 module/400w |
| Method of Test setting |
Set module (start/stop) ; each module A/B single control ,can set different current & data? |
| Output voltage/current range |
0~5V/ 0~200mA(1mA/Step)/channel |
| Operation mode |
CC |
| sample rate & com interface |
200ms (Sample to Controller) , 5sec (Sample to PC) & RS485 |
|
Continuous Mode
ON-OFF Mode
PULSE Mode
|
Continuous output capable
Selectable ON-OFF pulse wave settings (0~999.9sec), cycle setting (5 digits)
Pulse modes selectable; peak pulse current; 1/10 duty pulse width (1ms) |
| Current Set/Max test time |
Bias & Test current ¡V10CH(setting of bias positive current /test positive current setting) / 9999.9Hr |
Data reading & link number?
of machines |
Read /record value of the voltage ?t & temp. of channel and T/H values of each Chamber /max 32 Set |
| Output & indicator |
1%¡Ó2mA & 0.1V/1mA |
| Voltage / Current values Conversion curve |
record the voltage and current values of each Channel can convert the Curve |
| Voltage /Current/Temp. Analysis |
Recording of the start /sample /end time of voltage/ current/ temp. |
| Excel report conversion |
Set condition data, measurement data and voltage shortage datd converted as Excel file |
| Power Source |
AC110V/5A & 220V/3A , 50/60Hz |
(Your message will be sent directly) 
